Minibus
VW Crafter 50 plus Schulbus 34 Sitze Hydraulik-Tür

Harga tetap ditambah PPN

€60.891

Kondisi

Bekas

Lokasi

Eilenburg

Minibus VW Crafter 50 plus Schulbus 34 Sitze Hydraulik-Tür

VW Crafter 50 plus Schulbus 34 Sitze Hydraulik-Tür

Data mesin

Nama mesin:: Minibus

Pabrikan:: VW

Model:: Crafter 50 plus Schulbus 34 Sitze Hydraulik-Tür

Kondisi:: bekas

Harga & Lokasi

Harga tetap ditambah PPN

€60.891

Lokasi penjual:: Dübener Landstr. 59a, 04838 Eilenburg, Jerman

Hubungi

Rincian teknis

Jarak tempuh:: 5.430 km

Daya:: 130 kW (176,75 hp)

Pendaftaran pertama:: 07/2020

Jenis bahan bakar:: diesel

Warna:: putih

Tipe perpindahan gigi:: mekanis

Kelas emisi:: Euro 6

Jumlah tempat duduk:: 34

Perlengkapan:: ABS, pendingin udara, program stabilitas elektronik (ESP), filter jelaga

Rincian penawaran

ID iklan:: A19452041

Nomor referensi:: 1269. GW249037978

Pembaruan:: terakhir pada 29.07.2026

Deskripsi

Subject to errors and prior sale!
Internal number: 1269. 9037978
----EQUIPMENT

* School bus version with hydraulic passenger door and 8x double seats left/right (32 seats)
* Foldable single passenger seat with three-point belt
* Electrically adjustable and heated exterior mirrors
* Three-point automatic seat belts with belt height adjustment and belt tensioner for driver
* Electrical interface for external use - Electrical terminal block and preparation for function control unit
* Speed limit at 100 km/h - Maximum speed limit of 100 km/h (cannot be deactivated)
* Storage compartments: Glove compartment with lockable flap, illuminated
* Rear wing doors with window - Rear wing doors with window cutouts - Rear window
* "Climatic" air conditioning - "Climatic" air conditioning in the driver's cab - Refrigerant R134a
* Fog lights including cornering lights
* Approval: Car version with more than 9 seats - M2 approval
* Electrical safety package - Acoustic warning system for reverse gear engaged, dimmable
* Window package - Rear wing doors with window cutouts - Side window in the passenger/loading area, front left, permanently installed - Side window in the passenger/loading area, front right, permanently installed - Side window in the passenger/loading area, rear left, permanently installed - Rear window - Side window in the passenger/loading area, rear right, permanently installed - Safety interior mirror, dimmable - Side window in the passenger/loading area, middle left, permanently installed - Side window in the passenger/loading area, middle right, permanently installed
* Radio "Composition Media" with 8" touchscreen and mobile phone interface - Radio "Composition Media" with 8" touchscreen - Voice control - 1 USB interface (iPod/iPhone/iPad compatible), multimedia socket AUX-IN - Glove compartment with lockable flap, illuminated - 4 speakers: 2 tweeters, 2 woofers - Multifunction display "Plus" - Car-Net App-Connect - mobile phone interface
* Protective frame (roll bar)
* Seats 1st row: Comfort seat "Plus" left, in the 1st row
* Socket: 12 V socket and 4 cup holders in the dashboard
* Sockets: 2 12 V sockets in the driver's cab (in the dashboard)
* Airbag: driver's side
* Outside mirrors (left and right) convex, with integrated LED indicator and wide-angle range
* Hill start assist
* Brake light, third
* Tachograph: Digital tachograph
* Three-point automatic seat belts with belt height adjustment and belt tensioners for driver and front passenger
* Electronic stabilization program and ABS
* Chassis: Suspension and damping, standard
* Total weight: Vehicle registered with a permissible total weight of 5.0 t
* Electric windows
* Driver assistance systems: "Front Assist" environment monitoring system with city emergency braking function
* Gearbox: 6-speed gearbox
Fjdpfxswvyflo Aa Hjpl
* Weight class front axle - reinforced front axle
* Floor coverings: rubber floor covering in the driver's cab
* High roof, painted on the outside in the color of the vehicle
* Instrument panel (km/h) displays for speed, total/daily distance, rpm, fuel level and time
* Paintwork: Uni
* Steering wheel adjustable in height and reach
* Headlight range adjustment
* Marker lights, side
* Multifunction display "Plus"
* Particle filter: soot particle filter for diesel including SCR and AdBlue tank
* Wheels: steel wheels in silver with twin tires at the rear
* Instrument panel: control panel with additional console - including 1 DIN slot and 4 additional switch positions
* Hinges

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2009

580 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 3423 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Platform kerja yang dipasang pada truk Palfinger P 300 KS | 2015

Sittard

11.340 km

Platform kerja yang dipasang pada truk
PalfingerP 300 KS | 2015

Hubungi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, pendaftaran pertama: 07/2015, jenis bahan bakar: diesel, berat keseluruhan: 7.500 kg, kondisi ban: 75 persen, konfigurasi gandar: 4x2, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, jumlah tempat duduk: 3, panjang total: 8.650 mm, lebar total: 2.500 mm, tinggi total: 3.500 mm, Tahun pembuatan: 2015, Perlengkapan: ABS, derek, komputer bawaan, kunci sentral, lampu kabut, === MAIN SPECIFICATIONS === Year of manufacture: 2015 Operating hours: 5,510 h Working height: 30 m Maximum lateral outreach: 19.5 m Platform load capacity: 350 kg Chassis: MAN Axles: 2 Drive: 4x2 Transmission: Manual Cab: Single cab Engine power: — Fuel: Diesel Platform dimensions (L x W): Platform approx. 1.6 m Fpjdpfx Aajyr Nkzs Hsl Platform rotation: Yes (80° + 80°) Boom type: Telescopic boom / Articulated boom combination Outriggers: Yes – hydraulic outriggers CE certification: Yes Permissible total weight: 7,500 kg === HIGHLIGHTS === Carefully sourced from reliable origins with documented history CE certified and complete documentation available Immediately ready for operation and transport Comprehensive technical documentation available === CONDITION === Very good working condition – thoroughly inspected, serviced, and tested by qualified technicians. Inspection and functional testing possible by appointment at any time. === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide delivery possible Price on request (EXW / plus VAT) Reliable truck-mounted aerial platform from the reputable manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a lateral outreach of up to 19.5 meters, making this machine ideal for maintenance work, installations, construction projects, and infrastructure applications. This machine features hydraulic outriggers, automatic platform leveling, and a rotating aluminum work platform, ensuring safe and stable operation under various working conditions. All machines are fully inspected, CE certified, and immediately ready for use. === TRANSPORT === Crane loading available on request to facilitate smooth transport. Flexible transport solutions tailored to your destination and logistical requirements. All transport is professionally organized by the logistics team of Collé Rental & Sales.

Lihat detail

Iklan kecil

Jerman

11.023 km

Mesin penghancur
VecoplanVAZ 1300 M KN

Hubungi

Iklan kecil

Barcin

10.490 km

5T forklift medan 4x4 CE
5T CE

€25.800

EXW Harga tetap ditambah PPN

Hubungi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, kapasitas angkut: 5.000 kg, tinggi angkat: 5.000 mm, jenis bahan bakar: diesel, tipe tiang: triplex, produsen motor: Yunnei EUR5, tinggi total: 2.650 mm, panjang total: 3.900 mm, lebar total: 2.080 mm, Perlengkapan: garpu palet, geser samping, kabin, pelindung depan, pencahayaan, pendingin udara, penggerak semua roda, perpanjangan fork, forklift medan dengan penggerak 4x4 mesin diesel EUR5 Yunnei DEF30CZEF5 74kw 100HP kapasitas angkat 5T berat forklift 7,2T tiang triplex tinggi pengangkatan 5m ban pneumatik kabina dengan AC panjang fork 1220mm tambahan ember dalam set fork tambahan sepanjang 2000mm Fpsdjuzivvepfx Aa Hol forklift BARU

Lihat detail

Iklan kecil

Lograto

11.158 km

Eksavator perayap
Caterpillar330

Hubungi

Iklan kecil

Layar/penghancur Sonstige/Other Gasparin Backenbrecher GI118CV OLIMPO

Schorfheide

10.775 km

Layar/penghancur
Sonstige/OtherGasparin Backenbrecher GI118CV OLIMPO

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 381201764, Gasparin GI118CV OLIMPO Mobile Jaw Crusher on Crawler Tracks The raw power demonstrated by the OLIMPO, thanks to its 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling applications. Fpodpshd I U Ejfx Aa Hol This uncompromising machine was designed with a clear focus on operational requirements, productivity, effortless maintenance, and transportability. Equipped with state-of-the-art control and operating systems, it is both user-friendly and environmentally responsible. The HCS Control System (Hydraulic Crushing System) actively supports automated machine operation, ensuring maximum profitability through reduced operating costs and enhanced productivity—making it truly incomparable. The reinforced structure between the frame and the crusher provides outstanding robustness against stress and heavy-duty operations. The unique design of the supporting structure ensures excellent access to all machine components during maintenance. The OLIMPO crusher delivers impressive and unmatched performance, whether processing natural stone, handling recycling tasks, or in rental operations. Production capacity: approx. 360 t/h Patented HCS system Proportional distributor with “load sensing” for system optimization and a reduction in fuel consumption by approx. 30% Optional pre-screening Gap width hydraulically adjustable—even during crushing operation Quick wedge locking system with folding cylinders Discharge height: 3200 mm Dust extraction system Refueling pump Magnetic separator Warranty: 1 year or up to the maximum operating hours from initial commissioning Technical Data: Jaw crusher: 1100 x 800 mm Adjustable crusher gap: 50 to 200 mm Feed hopper: 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen: 1020 x 2000 mm Main conveyor belt: 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Crawler track: 450 x 3800 mm Weight: kg Transport length: 13,850 mm Transport width: 2,550 mm Transport height: 3,390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Lihat detail

Iklan kecil

Lehrte

11.021 km

Derek menara
FAUNRTF 40-3 Mobilkran

€89.990

Harga tetap ditambah PPN

Hubungi

Iklan kecil

Truk derek dengan crane 9 ton Klaas / Volvo K2500 RHX FMX 388 RHD

Britania Raya

11.778 km

Truk derek dengan crane 9 ton
Klaas / VolvoK2500 RHX FMX 388 RHD

Hubungi

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2025, Klaas K2500 RHX Volvo FMX 388 RHD Truk Crane (2025) Kapasitas maksimum 9 ton, panjang boom 59 m – untuk spesifikasi teknis lebih lanjut, silakan lihat dokumen PDF terlampir. Harap diperhatikan bahwa foto yang ditampilkan adalah foto perpustakaan. Foto terbaru dari crane sebenarnya akan menyusul. Informasi lebih lanjut, termasuk pemakaian/jumlah kilometer, akan diinformasikan kemudian. Fsdsy Ndriepfx Aa Hopl Pendaftaran minat lebih awal sangat disarankan.

Lihat detail

Iklan kecil

Mesin frais portal dengan dinamika tinggi FPT Industrie DINOMAX 1

Borgo San Dalmazzo

11.379 km

Mesin frais portal dengan dinamika tinggi
FPT IndustrieDINOMAX 1

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. Fodozb Evlopfx Aa Hspl SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Lihat detail

Iklan kecil

Forklift teleskopik yang dapat diputar Magni RTH 8.27

Wolfsbach

10.771 km

Forklift teleskopik yang dapat diputar
MagniRTH 8.27

Hubungi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 1.274 h, kapasitas angkut: 8.000 kg, tinggi angkat: 26.600 mm, jenis bahan bakar: diesel, tinggi konstruksi: 3.120 mm, berat kosong: 22.500 kg, panjang total: 8.250 mm, jenis penggerak: Diesel, jangkauan lengan: 23.100 mm, lebar konstruksi: 2.530 mm, Rotating Telehandler Speed class: 40 Technical condition: very good Fpsdpfxovgi A Ns Aa Hol Description: The Magni RTH 8.27 is a high-performance rotating telescopic handler suitable for assembly, lifting, and material handling tasks on construction sites as well as in industrial applications. With a lifting height of up to 26.6 m, a load capacity of 8,000 kg, a continuously rotating upper carriage, and all-wheel drive, this machine is ideal for handling heavy loads, working at height, and operating on challenging terrain. Offers great reach and off-road capability. Robust, powerful, and easy to operate. For further information or a non-binding inquiry, please visit our website – safe operation at any height. In addition to this unit, we offer further aerial platforms and telehandlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service, and repair – all from a single source. Leasing, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with competent and personalized advice.

Lihat detail

Iklan kecil

Pusat pemesinan CNC 5-sumbu HMC, pusat penggilingan, pusat pemesinan dengan kontrol CNC SIEMENS 840D LICON Liflex 1266 PC B1

Hessisch Lichtenau

11.072 km

Pusat pemesinan CNC 5-sumbu HMC, pusat penggilingan, pusat pemesinan dengan kontrol CNC SIEMENS 840D
LICONLiflex 1266 PC B1

€165.000

Harga tetap ditambah PPN

Hubungi

Kondisi: bekas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017 Equipped with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Traverse paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/– 135° (270°) B-axis 360° infinite Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7,500 N Feed force Z-axis 10,000 N Positioning tolerance (X/Y/Z) 0.008 mm Swivel speed A-axis 180° rotation in 4 sec. Interference circle diameter in the swiveling bridge max. 1400 mm Transport load in the swiveling bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle output 37 kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Fedpfx Aast Ac Efo Hspl Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent pockets occupied Ø 140 mm Tool diameter with adjacent pockets empty Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Pneumatic connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37 kW/40% duty cycle) with liquid cooling and recooling device - 2-axis rotary tilting table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary axis’s table - Double pallet changer, without pallets (new pallets must be procured) - Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, as disc turret - Machine designed for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper-belt chip conveyor, ejection height 1,150 mm - Licon ECO-Mode (energy-efficient operation of aggregates) - Direct position measuring system in all axes - Logged operating hours with control voltage on = approx. 7,500 h Space requirement for operation L x W x H 9,000 x 5,000 x 3,800 mm Space requirement for transport L x W x H 6,100 x 4,400 x 3,600 mm Basic machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Lihat detail

Beriklan di sini