Ekskavator perayap

Volvo ECR235 EL excavator w/ digging bucket, sanding buc

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Fjdpjh Eibaefx Adgeft Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: baik (bekas), UV curing oven for production line Fodpfx Ajt Ag Uqsdgeft

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 5.697 h,

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout Fedpfx Adsv S Hy Aegoft rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: bekas, Painting line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - Air blast duct, top: 2 pcs - Air blast duct, bottom: 1 pc - Dust removal brush - With ionisation bar, top - With ionisation bar, bottom - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction outlet Ø 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400 / 50 Item 3 Venjakob VEN SPRAY Perfect Spray Machine - Manufacturer: Venjakob Fedpov I Akvofx Adgjft - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs - Twin gun drive - Dry exhaust extraction - Extraction outlet diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control, EPS-CNC CNC 7000 - Colour management system for number of pumps: 3+1 pcs - Number of installed airless spray guns: 4 pcs - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed side - Exhaust air recirculation system - Exhaust fan control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~ 20 - 26 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume container - Gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla High-Level Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Payload per pallet: 300 kg - Max. part height: approx. 110 mm - Clear height between pallets: 120 mm - Dimension: centre of pallet to centre of pallet: 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, hot water - Without hot water regulation valves - U-shaped pass-through configuration - Infeed side: right - Feed rate via frequency converter adjustable ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~ 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. ± 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 590 h, Fungsionalitas: belum diuji, en-1 Fodpfjvnq Rkjx Adgoft

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, daya: 200 kW (271,92 hp), crambo5200e-2016 Fsdpfx Adexv Acqjgsft

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 200 h, Fungsionalitas: belum diuji, Equipment: Basic Package Methor Track Tracked undercarriage incl. 2 travel speeds Undercarriage track 400mm, triple grouser Auxiliary hydraulic connection 70 l/min 24 V electric control Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan Acoustic start-up warning Fuel tank 300 liters Paint finish: RAL 2011 deep orange Additional Equipment: Rubber quick-change pads Engine Cat C7.1, 205 kW Rear discharge conveyor 6.9 m Shredding system Size L (8 teeth) Frame for overband magnet Overband magnet Quick-change roller system on the roller Ffedpjvnq Trefx Adgjt Quick-change roller system on the machine Water spray system LED work lighting Additional electric pump for operation in case of engine shutdown

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Used steam boilers Manufacturer: Riello Year of manufacture: 2001 We speak Russian! Viewings only by prior telephone arrangement! Preferred sale to dealers, businesses, or for export. Fodpfxjtuwc Us Adgeft All information is provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We can of course handle all formalities. Loading is possible.

Kondisi: baik (bekas), translation-001 Fodpfx Adet Hdgfjgsft