GARIS MENGATASI ROBOT CNC

VOORTMAN V808

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Technical data: Ihsleummw Tohcdw Net Maximum cutting width: 3100 mm Maximum cutting capacity (steel St40): 15.0 mm Motorized, adjustable back gauge: 1500 mm Motorized, adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety fence with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t We can only present a small portion of our current range of used machines here. Please also visit our website! The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 18.000 kg, tinggi angkat: 11.900 mm, jenis bahan bakar: listrik, tipe tiang: telescopik, tinggi konstruksi: 1.990 mm, berat kosong: 21.650 kg, panjang total: 5.540 mm, jenis penggerak: Elektro, lebar konstruksi: 2.000 mm, Pick & Carry Crane Mast type: Telescopic Technical condition: good Front tires type: Non Marking Rear tires type: Non Marking Ihelhcdst Dd Uwjw Nst Remote control

Kondisi: bekas, Tahun pembuatan: 2006, en-001 Iholhou Ibu Rscdw Net

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Ielhcdjhzbipsw Nsht Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: sangat baik (bekas), jarak tempuh: 236.848 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 09/2017, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, rem: pengereman mesin, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, jam operasional: 794 h, Perlengkapan: ABS, derek, filter jelaga, kendali jelajah, kopling trailer, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Islsd Hxx Ajhcdw Nsht

Kondisi: baik (bekas), Tahun pembuatan: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Islet Iklkshcdw Njht Shears at the flat bar shear up to 500 mm length for material thicknesses up to 18 mm steel Contact length stop Includes a large amount of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm Islhcolgvkiedw Neht - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Ielhcdshigmbsw Neht Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1991, ketebalan pelat baja (maks.): 16 mm, panjang pemotongan (maks.): 6.000 mm, HYDRAULISCHE SCHERE LVD MVSB 62/16 Ihslheumhm Aecdw Not Seriennummer: 18478 Baujahr: 06/1991 TECHNISCHE DATEN: Max. Blechdicke St45: 16 mm Schnittlänge: 6200 mm Ständerabstand: 6400 mm Durchlass: 60 mm Hinteranschlag-Verstellbereich: 1000 mm Min. Schnittwinkel: 0,5° Max. Schnittwinkel: 2,5° Min. Hübe/min: 6 Max. Hübe/min: 25 Min. Messerabstand: 0,05 mm Max. Messerabstand: 1,6 mm Motorleistung: 30 kW Gewicht ca.: 35.000 kg Abmessungen (LxBxH): 7100 x 2400 x 3000 mm Zubehör: - ELGO P85 „GO-TO“ für Hinteranschlag - Elektrische Verstellung des Hinteranschlags, 1000 mm - 1 x Frontauflage 2 m, eine mit 90° Anschlagarm (Frontauflage L2000 mm) - Fußpedal - Kugelrollen im Tisch - Schwenkbarer Hinteranschlag mit manueller Hydraulikpumpe