Spindel gerinda Voumard, konverter frekuensi REFU HF

Voumard Schleifspindeln REFU HF

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° range and continuous B-axis. Iaedpfxsku A A Hj Afior Equipped with a 10-station pallet magazine and automatic tool changer with 199 positions. Machine is supplied with the following accessories: Chip conveyor, high-pressure coolant system through the spindle line with separate tank and paper filter.

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2, and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Iaedjwzynqjpfx Afijr Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Kondisi: baik (bekas), Tahun pembuatan: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide stroke: 850 mm Drilling process: Single-lip deep hole drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – Self-driven Feed rate: 20 – 500 mm/min Rapid traverse speed (NC operation): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 RPM Tailstock Motor power: 0.75 kW at 1000 RPM Spindle speed: 500 RPM Ijdpfx Afevca Rceisar Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Ijdpfsuxft Eox Afioar Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm Iaodpfjirax Usx Afier - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Kondisi: baik (bekas), Tahun pembuatan: 1998, Hermle C 600 U Pusat Pemesinan CNC Produsen: Hermle Tipe: C 600 U Tahun pembuatan: 1998 Tegangan kerja: 400 V / 3~ Frekuensi: 50 Hz Tegangan kontrol: 24 V Total arus terukur: 31 A Kontrol: Heidenhain TNC 426 Berat mesin: 6400 kg Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 450 mm Perjalanan sumbu Z: 450 mm Majalah alat: 30 posisi Isdpfxoyrr Ucj Afiear Jenis dudukan alat: SK-40 Aksesori: tersedia, sesuai dengan foto (ragum + probe) Tidak ada jaminan atas kebenaran, kelengkapan, dan keakuratan data yang diberikan.

Kondisi: bekas, Tahun pembuatan: 1994, Turning diameter 570 mm Turning length 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide 365 mm Main spindle speeds: 3-2,500 rpm Main spindle drive power 15/19 kW Iaodpfx Asu Sbkgefijr Spindle bore 62 mm Spindle nose DIN 55027 No.8 Tailstock taper MK 5 Quill stroke 190 mm Quill diameter 80 mm Feed range – longitudinal and transverse 0.01-50 mm/rev Total power requirement 50 KVA Machine weight approx. 5 t Space requirement approx. m Incl. Forkardt chuck F315 Incl. 6 pcs Multifix holders Incl. 1 pc closed steady rest Incl. 1 pc open steady rest

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with Iaedpfxjt Hw N He Afisr equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.

Kondisi: sangat baik (bekas), HSS saws grinding machine VOLLMER model CMS 10M Iodpfx Afji Hchdjisar

Kondisi: hampir baru (bekas), Profile grinding machine Utma model P20 Isdpfxjff H E Ro Afioar