Refrigerator body van

VW CRAFTER 35 2,0 TDI Kühlkoffer*THERMOKING

Kondisi: baik (bekas), Tahun pembuatan: 1984, Kepala penggiling: - daya motor: 2,2 kW - kecepatan spindel: 1.000 - 8.000 rpm - kemiringan spindel (sumbu A): -10° hingga +27° - akurasi pengaturan: 1 menit - pengaturan tinggi (sumbu Y): 130 mm - rentang langkah (sumbu X): 220 mm - langkah osilasi, dapat disesuaikan secara bertahap selama osilasi: 0-30 mm - frekuensi osilasi: 30/60 1/menit Kepala kerja: - pengaturan radius (sumbu Z): 0,01-50 mm - akurasi pengaturan: 0,01 mm - retraksi luncur dari posisi penggilingan ke posisi pengukuran: maks. 49 mm - meja silang, permukaan penjepit: 155 x 205 mm - perjalanan X - Y: masing-masing 60 mm - sudut putar maksimum (sumbu B): 260° - tegangan suplai: 380 V - berat: 1200 kg Aksesori/opsi: - tekanan penggilingan variabel - proyektor terpasang pada posisi pengukuran - 1 lemari dengan aksesori - berbagai roda penggiling, flens - tangki pendingin - dokumentasi Dkjdpfx Aovmpabsgqow Tersedia di gudang kami.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Dkedpfeuz If Nsx Agqsw Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping Dkedpfx Agou Et Nbjqsw - Coolant system - Vertical T-slots on the left-hand side of the machine

Tahun pembuatan: 2026, Kondisi: baru, Gambar 1: Set yang ditawarkan terdiri dari dua rangka pengangkut, masing-masing dengan kapasitas beban 6 ton. Total kapasitas angkut mencapai 12 ton. Dilengkapi dengan roda PU berkualitas tinggi. Dodpfx Aogi Dl Nsgqekw Gambar lain: Tersedia rangka angkut lainnya dalam berbagai ukuran konstruksi dengan tinggi sisip 60–220 mm dan kapasitas beban antara 5 hingga 220 ton. Tersedia dalam versi 3 titik, 4 titik, rangka kontainer, rangka putar dengan roda polyurethane (untuk semua jenis lantai) atau roda nilon (untuk lantai datar dan halus). Silakan kirimkan permintaan dengan memberikan informasi berat yang akan diangkut dan aplikasi penggunaannya, maka kami akan membuatkan penawaran untuk Anda. Waktu pengiriman singkat dari stok. Gambar mewakili pilihan produk.

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Dksdpfx Agjt U R Hzoqew Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: bekas, jarak tempuh: 127.163 km, daya: 93 kW (126,44 hp), pendaftaran pertama: 06/2010, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 4, jumlah tempat duduk: 3, Perlengkapan: pendingin udara,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 225 mm, jarak gerak sumbu Z: 605 mm, berat keseluruhan: 4.950 kg, produsen pengendali: MAZATROL, model controller: Smooth C, jumlah sumbu: 2, en Djdpfxjyuyh Ao Agqjkw

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [deg] LEFT UPPER TURRET HEAD - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 - Travel X/Z: 320 x 2,000 [mm] - Travel Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 137 [kW] WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] Dkedpfjuhbpfsx Agqow - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34274 [hrs.] EQUIPMENT - Control: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: Right

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 513.666 km, pendaftaran pertama: 07/2014, jenis bahan bakar: diesel, berat muatan maksimum: 3.000 kg, berat keseluruhan: 6.500 kg, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: baja, Perlengkapan: ABS, Tachograph, kantung udara, komputer bawaan, kunci sentral, pendingin udara,

Kondisi: bekas, Tahun pembuatan: 2004, jam operasional: 11.022 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07520000211, panjang pembubutan: 1.070 mm, diameter putar di atas sled silang: 400 mm, diameter pembubutan: 560 mm, daya motor spindle: 37 W, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 79 mm, jarak pergerakan sumbu X: 485 mm, jarak lintasan sumbu Y: 160 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant filtration system as well as a comprehensive selection of HSK 63 - A tools, approximately 40 pieces. Additionally, a Berg chuck is included, as shown in the photos. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading can be carried out without any issues. Dksdsug Uc Nepfx Agqew