Telehandler

Weidemann Teleskopradlader T 4512

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 760 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, berat benda kerja (maks.): 12.000 kg, tinggi total: 48.500 mm, panjang total: 85.800 mm, lebar total: 56.000 mm, lebar meja: 2.400 mm, panjang meja: 3.020 mm, berat keseluruhan: 20 kg, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 6.000 rpm, jarak dari tengah meja ke hidung spindel: 960 mm, hidung spindel: ISO 50, panjang alat: 350 mm, diameter alat: 127 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Portal-type vertical machining center "AWEA LP-3025" Iiodpfxerl Svre Aahjk

Tahun pembuatan: 2022, Kondisi: baru, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Admissible workpiece diameter: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotational speed: approx. 100–2,000 mm/min - Dual-pedal foot switch Isdpfxjfxw H Ae Aahsik - Potentiometer for stepless speed control

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. Iijdpfxodyah Sj Aahok - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, jam operasional: 1.265 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 20.000 rpm, diameter pembubutan: 4 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Citizen R-serisi, küçük çaplı işleme için özel olarak tasarlanmış otomatik torna tezgâhlarıdır. Bu makine çok az kullanılmıştır (15.800 parça işlenmiştir). Model yılı: 2013. ASP-04 çubuk sürücü ile birlikte. Ijdevtancepfx Aaheik Satış Türkiye dışına gerçekleşirse KDV uygulanmaz.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5831, jarak pergerakan sumbu X: 7.500 mm, jarak lintasan sumbu Y: 6.200 mm, jarak gerak sumbu Z: 2.000 mm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, pergerakan cepat sumbu Z: 60 m/menit, panjang pemakanan sumbu X: 7.500 mm, panjang umpan sumbu Y: 6.200 mm, panjang umpan sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 80 m/menit, laju pemakanan sumbu Z: 60 m/menit, daya nominal (semu): 150 kVA, torsi: 45 Nm, produsen pengendali: Fanuc, panjang benda kerja (maks.): 7.500 mm, lebar benda kerja (maks.): 6.200 mm, tinggi benda kerja (maks.): 2.000 mm, diameter benda kerja (maks.): 6.200 mm, berat benda kerja (maks.): 50.000 kg, tinggi total: 5.500 mm, panjang total: 12.800 mm, lebar total: 8.900 mm, lebar meja: 6.200 mm, panjang meja: 7.500 mm, beban meja: 50.000 kg, kecepatan spindel (min.): 24.000 rpm, kecepatan spindel (maks.): 28.000 rpm, pasokan pendingin: 8 batang, daya motor spindle: 28.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 32, tegangan masuk: 380 V, jenis arus masuk: AC (pendingin udara), kecepatan operasi: 80.000 mm/dtk, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Tischabmessung 6.840 x 4.400 mm. Verfahrwege Achsen 'X' = 7.500 mm, 'Y' = 6.200 mm, 'Z' = 2.000 mm, 'B' = ±110°, 'C' = ±300°. Eilgänge 'XY' = 85 m/min, 'Z' = 45 m/min, 'BC' = 9.000°/min. Maximale Spindeldrehzahl 24.000 U/min (28 kW Motor). Spindelaufnahme HSK 63F. 16 x 2-fach Werkzeugmagazine. Seriennummer 5831 (2011). Iisdpfxou I Nzro Aahjk

Kondisi: baru, Pressing force 500 t Clearance between uprights 600 mm Stroke 600 mm Table area 3500 x 1500 mm Distance from cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision milled with a CNC milling machine - Chrome-plated cylinder - Working plate with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold block according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety cable with switch all around the press 4. TRANSPORT AND INSTALLATION – Price includes transport, installation and training at the customer’s plant. – Hydraulic oil is not included in the price. – All handling costs (e.g. crane, forklift, etc.) are borne by the buyer. Iisdpfxofv Awhe Aahsk 5. WARRANTY – The machine comes with a 2-year manufacturer’s warranty. – This warranty includes the supply of all spare parts required for repair and servicing the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged by improper use.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Includes various accessories. Documentation available. Iedpfx Aot H Rd Roahoik

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, The ASCO® SD MINI drum screen features a foldable design and is a semi-mobile unit. Equipped with a vibration motor, it is particularly practical for use in recycling facilities as well as for construction, agricultural, and landscaping applications where a wide range of materials must be processed. ASCO®Screen’s innovative mobile drum screening machine: With variable height adjustment, it offers ease of handling and transport. Screening variable materials is effortless, whether the machine is loaded manually or by excavator. In both cases, the screened material is conveyed by the integrated discharge belt. Screened material is distributed along the entire length of the drum, while oversize material is discharged at the rear of the machine. Efficient processing of various materials in recycling operations. Cost-effective use in construction, agricultural, and horticultural businesses where space is limited. Flexible operation thanks to adaptable configuration options. High output and capacity ensure impressive screening performance. Versatile material separation: coarse fractions, chips, compost, soil, bark mulch, pellets, wood chips, gravel, demolition waste, and plastics. Technical specifications: - Drum length: 1.49 m - Usable drum length: 1.25 m Iijder Nbxyspfx Aahok - Drum outer diameter: 0.8 m - Usable screening area: 3.15 m² - Screening capacity: 5–40 t/h - Mesh size: Ø4–Ø100 mm - Hopper opening: 1600 x 760 mm - Bucket width: 1.5 m - Adjustable speed: 5–20 rpm - Motor power: 400 V / 2.2 kW - Loading height: 1.5–1.86 m - Weight: 600 kg Highlights: - Vibration motors for emptying the hopper - Three different drum variants - Bi-directional drum rotation - Cleaning brush - Easy drum exchange - Single-wheel drive - Hour meter - Height-adjustable / supports with or without wheels

Kondisi: bekas, daya: 55 kW (74,78 hp), jenis bahan bakar: diesel, tinggi angkat: 9.070 mm, Tahun pembuatan: 2024, jam operasional: 18 h, Unladen weight: 7,320 kg Engine brand: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000K01124555 Front tyre condition: 100% Rear tyre condition: 100% Iodpfotr Hz Sjx Aaheik Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Contact PFEIFER GROUP for further information.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 36,77 kW (49,99 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: merah, berat keseluruhan: 4.050 kg, tinggi angkat: 4.200 mm, ukuran ban: 20,5-70 R16, kondisi ban: 100 persen, kondisi penggerak: 100 persen, konfigurasi gandar: 2 gandar, kelas emisi: Euro 5, tipe tiang: telescopik, lebar bucket penggalian: 1.500 mm, Tahun pembuatan: 2025, bahan bakar: diesel, kapasitas angkut: 1.400 kg, Perlengkapan: boom yang dapat disesuaikan, filter jelaga, hidrolik, kabin, kebisingan rendah, kopling trailer, lampu depan tambahan, pelindung kepala, pemanas parkir, penggerak semua roda, sekop standar, en-HR-Tele-Lader-3514T-The-powerful-telescopic-loader-for-versat ile-applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to its telescopic arm, the loader can lift loads of up to 1.4 tonnes to a height of up to 4.4 m. Powerful engine: The Yunnei DEF20CFF4 engine with 50 HP delivers maximum performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable simple handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its own weight and a lifting capacity of 1,400 kg, the H&R Wheel Loader 3514 is exceptionally agile – ideal for tight construction sites and agricultural work. Hydraulic quick coupler: With the hydraulic quick coupler, you can switch quickly and easily between different attachments such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow blades, etc. Comfortable cab for all-day use: The H&R Loader 3514T features a spacious, air-conditioned comfort cabin with adjustable seat, diesel parking heater, and reversing camera, enabling comfortable and safe operation over longer periods. H&R loaders are technically and visually optimized and thoroughly inspected in-house. In addition, each machine receives comprehensive rust protection treatment. Our loaders comply with the CE standard as per the EU Machinery Directive. Each machine comes with a TÜV Süd certificate for obtaining individual operating approval in accordance with §21 StVZO (road approval / operating license as a self-propelled working machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic arm • Thoroughly optimized in Germany • Powerful and robust – versatile applications • Compact design for excellent maneuverability • Comfort cabin with heating, ventilation, and diesel parking heater • Reversing camera with display • Adjustable steering column and seat • Joystick with electronic gearshift for precise control • Additional control circuit for attachments • LED work lights and wiper for clear visibility in any weather • MP3 radio and USB port for entertainment while working • Ball-type trailer hitch with socket for additional trailer use • 220V engine pre-heater for reliable cold-weather starting • Hour meter for monitoring operating hours and maintenance intervals • CE compliant per EU Machinery Directive • 1 year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road approval / operating permit: €480 Extended warranty (2 years): €590 Transport within Germany and Austria: On request Technical Details Iisdpfx Aerdhx Tsahek Engine: 4-cylinder Yunnei Engine power: 50 HP (36.8 kW) Emission standard: Euro 5 Lifting capacity: 1,400 kg Lifting height: 4,401 mm (bottom edge of standard pallet fork) Dumping height: 3,373 mm (bottom edge of tipped-out standard bucket) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5,210 x 1,690 x 2,560 mm Weight: 4,050 kg Accessories and spare parts available from us. Please include your telephone number with inquiries!