Yang lain

WesttecH Westtech Woodcracker CL190 Fällkopf Fällgreifer

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 237042, daya: 25 kW (33,99 hp), berat keseluruhan: 1.575 kg, jenis bahan bakar: listrik, warna: kuning, Based on personal experience: The battery easily lasts a full workday even under continuous operation. Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Dwodpfevmz N Ujx Afref Drive type: electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (kg): 1575 Equipment: Power Control System – Whisper Cut chipping system The Schliesing mid-range series is now also available as an electric chipper: the Schliesing 325MX-E. The powerful brushless asynchronous motor with 25 kW output and 120 Nm torque guarantees high productivity with familiar pulling power. The batteries are designed to allow a full day’s work without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity for logs up to 20 cm in diameter. Motor and chassis: • Brushless asynchronous motor with 25 kW and 120 Nm torque • Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h including EU type approval • Robust, fixed and widened steel fenders • Heavy-duty support wheel at the front and rear support stand • Hitch with overrun brake and soft-dock ball coupling or DIN towing eye • LED lighting conforming to German Road Traffic Licensing Regulations (StVZO), impact-protected • Pneumatic tires 205/65 R15 C Battery: • LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V • Enables full-day operation without recharging, no recharging required after long idle periods • Energy recovery through regeneration of blade disc kinetic energy during operation • Charging port: standard plug 220-240V/16A • Full charging time: 8 hours • Guarantee for 1,000 charge cycles at 80% State of Health (SOH) Housing / feed hopper / discharge chute: • Folding feed hopper with minimum feed depth of 1,500 mm • Fully galvanized, corrosion-resistant hopper flap • Hopper inner dimensions: width = 1,040 mm, height = 960 mm • Swiveling discharge chute with adjustable deflector • Discharge chute mounted on ball bearing turntable • Key machine parts with sound insulation (especially chipper hood and discharge chute) • Two emergency stop switches: on top of the hopper and on the side of the hopper flap Chipping system: • Chipping system with safety cut-off as per EN 13525 • Robust chipping disc Ø 655 mm, 35 mm thick • Enclosed knife system for fast, safe, and precise knife changes • Continuously adjustable chipper knives • Chipper knives can be reground multiple times for long service life (approx. 10x) • Horizontally usable counterknife and vertically usable counterblade, each two-fold for increased service life • Anti-wrap protection at the main bearing of the rotor disc Hydraulic feed: • Feed control with independent hydraulic circuit • PowerGrip feed roller, 240 mm wide, with hydraulic feed. Highly grippy, aggressive, and uniform feed through a separate hydraulic motor on each roller • Parallel-guided top roller ensures regular and uniform feed, preventing material jamming • Hydraulically adjustable feed speed and, therefore, chip size • Hydraulic tank fill level indicator OPTIONS OVERVIEW: The Whisper Cut® • V-shaped knives draw in wood more evenly and with less vibration • In combination with the centering PowerGrip roller, chipping produces minimal movement of the material

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 7.080 h,

Kondisi: baru, nomor mesin/kendaraan: wtcs750s,

Tahun pembuatan: 2022, jam operasional: 20 h, Kondisi: seperti baru (mesin pameran),

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, daya: 33 kW (44,87 hp), berat keseluruhan: 1.570 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, bahan bakar: diesel, Schliesing 325EX‑D Wood Chipper: The Compact Model with Rotating Chipping Unit The Schliesing 325EX‑D wood chipper is a powerful machine designed for demanding wood processing applications, featuring a robust engine, versatile feeding options, and sturdy construction. Its swiveling infeed hopper and extensive safety features meet the highest standards, delivering an efficient solution for processing logs up to Ø 20 cm in diameter. Technical Data: Type: Schliesing 325 EX Log capacity: Up to Ø 20 cm Infeed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: approx. 1,570 kg Features: Engine and Chassis: Dwsdpfxsv Ev E Uo Afrjf - Water-cooled, Stage V 4-cylinder Kubota common-rail turbo diesel engine with DPF, rated at 33 kW / 44.9 HP - Industrial overrunning clutch between engine and flywheel to protect the engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h, EU road homologation - Rugged, fixed sheet steel mudguards - Device for front jockey wheel and rear support leg - Lighting in accordance with road traffic regulations (StVZO) featuring impact-protected components - Pneumatic tyres 205/65 R15C, EU homologated Housing/Hopper/Discharge Chute: - Foldable infeed hopper with a minimum input depth of 1,500 mm - Fully galvanized hopper cover for long service life - Hopper dimensions (internal): width = 1,040 mm, height = 960 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on slewing ring for variable orientation - Noise insulation on key machine parts such as the chipper housing and discharge chute - Emergency stop button on top of the hopper and at the side of the hopper cover Chipping Mechanism: - Rotating chipper housing with adjustable input angle up to 270° - Safety interlock in accordance with EN 13525 - Flywheel with a diameter of Ø 655 mm and thickness of 35 mm - Enclosed knife system for rapid and safe blade changes - Continuously adjustable chipper knives, re-sharpenable multiple times for extended service life - Horizontal counter-blade and vertical counter-edge, each usable on two sides for long durability - Winding protection on the main bearing of the flywheel Hydraulic Feed: - Feed control with dedicated hydraulic circuit - PowerGrip infeed roller (240 mm wide) with hydraulic feed for firm and uniform material transport - Parallel guide of upper roller for smooth feed with no jamming - Hydraulically adjustable feed speed to control chip size - Hydraulic oil tank level indicator.

Kondisi: baru, nomor mesin/kendaraan: wcs510c,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Djdpfx Afov Evx Uorjwf Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: baru, nomor mesin/kendaraan: wtcl260,

Kondisi: baru, Tahun pembuatan: 2024, Rentang pemotongan baja bulat pada 45°: 108 mm, Rentang pemotongan baja bulat pada 90°: 108 mm, ketinggian potong (maks.): 150 mm, BERG+SCHMID Dual Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25–80 m/min • Mitre cutting left up to 60° • Suitable for cutting steel, stainless steel, and aluminum profiles • Quick-release vise with rapid clamping system • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base (supplied disassembled) The AutoCut system includes: • Hydraulic cylinder, feed control, spring pack, and limit switch, allowing for three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal cutting feed 3. Manual operation – hydraulic cylinder functions as a braking cylinder Blade dimensions: 2455 x 27 x 0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, and minimum quantity lubrication available on request! Dwsdpfjt I R Edox Afrsf Delivery time: ex stock Waiblingen Beinstein

Kondisi: bekas, berat keseluruhan: 3.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 01/1987, panjang ruang muatan: 4.035 mm, lebar ruang muat: 2.260 mm,