Trailer tugas berat

WMT D15/6,0 x 2,45

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m Cpodpfx Aowbh Ifoa Tew ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: sangat baik (bekas), Multiple underground 150 m³ steel storage tanks (firefighting water tanks) Capacity: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted according to DIN 14230 for use as underground firefighting water tanks: The tank features a firefighting water suction connection in accordance with DIN 14244, equipped with a permanently mounted A-type fire brigade coupling per DIN 14319, design type B, without dip tube. Csdpfxsfnh Tgo Aa Topw In addition, the tank is fitted with a ventilation flange/stub connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank is empty, cleaned, and has been factory-coated externally with bitumen. - On request, we can supply the tank with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. An inspection is possible at any time by prior appointment. If you need further information, feel free to call us or send us an email at b.barth (at) barth-tank.de

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration Cpsdpfx Aowtppzsa Tsw • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.200 mm, rentang pengukuran sumbu Y: 2.000 mm, rentang pengukuran sumbu Z: 1.000 mm, Measurement ranges X-axis: 1200 mm Codpfedv I Abox Aa Tspw Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000]µm CNC control: Renishaw UCC S5 Handbox: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Software: Inspect3D Inca V6, new license (all languages) Original year of manufacture: 2014, modernized in 2017 and 2025 Trade-in against other CMMs possible

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tekanan: 7 batang, Complete system consisting of 3 units of AKS 6400 four-head welding machines and 2 units of AKS 6600 four-head welding machines, as well as 2 units of SV 800/4 CNC weld bead cleaning machines including chip extraction. Csdpfsw Etv Ajx Aa Tspw

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A Cpjdpfxjfxgp Ue Aa Tew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Codovwgmmspfx Aa Tspw Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm Codpfx Aasng Amks Tepw • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: sangat baik (bekas), jarak tempuh: 70.972 km, pendaftaran pertama: 10/2017, jenis bahan bakar: diesel, konfigurasi gandar: 10x4, jarak roda: 4.300 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, rem: pengereman mesin, warna: beige, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, Perlengkapan: ABS, AdBlue, filter jelaga, kendali jelajah, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: bekas, Tahun pembuatan: 1990, 1918-1990-loadtable-40t Cpjdpehy T Nvefx Aa Tjw