Meja penjepit

WMT FL-WB 90/60

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade Nodjd Du T Ijpfx Ahwowc • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Swing length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions X/Y/Z: approx. 6500 mm/2500 mm/2300 mm. Control system: Heidenhain, operating hours: approx. 9,000 h. Includes accessories such as a steady rest. Documentation available. An on-site inspection is possible. Nwedpjvwcwujfx Ahwjc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, tinggi pusat: 165 mm, lebar di tengah: 635 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 30 rpm, berat keseluruhan: 900 kg, Sehr geehrte Damen und Herren, We offer for sale a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully operational and can be inspected and tested on site at any time. Availability: Immediate Distance between centers: 635 mm Center height over bed: 165 mm Center height over cross slide: 105 mm Spindle bore: 42 mm Njdpfx Aeu St S Aehwowc Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, diameter putar di atas sled silang: 800 mm, lubang spindel: 92 mm, diameter pembubutan: 800 mm, panjang pembubutan: 6.000 mm, panjang total: 9.000 mm, lebar total: 1.900 mm, tinggi total: 2.100 mm, kecepatan spindel (maks.): 1.400 rpm, kecepatan spindel (min.): 14 rpm, Heidenhain ND-780 mit 3-Achsen-Digitalanzeige (X, Z0, Z) Heidenhain LS388C Maßstäbe 2 x CE-Futterabdeckungen für 500 & 900 mm SCHUNK 3-Backenfutter Ø 400-102 mm Bison 4-Backenfutter ... Lünette Ø 30 - 210 mm Lünette Ø 210 - 370 mm Spitzenweite (DBC): 6.000 mm Umlaufdurchmesser über Bett: 800 mm Umlaufdurchmesser über Planschieber: 520 mm Umlaufdurchmesser in der Bettbrücke: 870 mm Bettbrückenlänge: 320 mm Spindelbohrung: 92 mm Spindelleistung: 15 kW Bettbreite: 550 mm Spindelaufnahme: 6 MK (Morsekegel) Drehzahlbereich: 14 – 1.400 min⁻¹ Länge: 9.000 mm Nodpfx Ahsvn Svuowswc Breite: 1.900 mm Höhe: 2.100 mm Gewicht: 7.670 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 860027, 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel distances X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M 16 - Drill spindle mount: MK 2 (Morse taper 2) - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm 200 - 3600 rpm - Motorized stroke for the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power connection: 400 V Nsdpfxju Aq Ame Ahwjwc - Required space (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Heidenhain, model controller: TNC430, diameter meja putar: 540 mm, kecepatan spindel (maks.): 16.000 rpm, jam operasional spindle: 32.000 h, hidung spindel: HSK63, jumlah slot dalam magazin alat: 30, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, HERMLE C800-U yang sangat terawat dengan baik. Meja putar miring: 540 x 540 mm Jam operasi program hanya sekitar 34.000 jam. Bidang penggunaan: pembuatan alat Servis dilakukan oleh produsen. Penggantian kepala spindle terakhir: 04/2017 Nwedpfx Ahjx Hg E Towec Penggerak sumbu A baru Probe iR Heidenhain

Kondisi: baru, Cutting diameter: 305 mm Bandsaw blade length: 3,375 mm Cutting width: 350 mm Bandsaw blade dimensions: 3,375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangle: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangle: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Nedpfx Aheu Dbvtjwewc Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 0.7 t Space requirements approx.: 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing mounted turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic cooling system

Kondisi: baru, Tahun pembuatan: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial helical gear motor - Automatic shut-off after end of cut - Mechanical saw blade tensioning with electric band break monitoring - Quick-release, movable vise - Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) - Electric coolant pump - Precision ground carbide saw blade guides (adjustable) - Large-diameter round support table, rotates with miter cuts, miter angle display (scale) on operator side - Direct switch between manual operation and lowering mode - Easily removable chip collection tray - Material stop 500 mm with scale - Including combination-tooth saw blade 4/6 Technical Data - Motor: Three-phase, 400 V, pole-changing, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm - Cutting speed: 40/80 m/min - Vise clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Njdofg Eq Ropfx Ahwowc Further accessories available upon request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Kondisi: baru, Tahun pembuatan: 2026, For sawing pipes and solid materials made of stainless and tool steel Two band speeds via pole-changing motor Rugged gearbox with hardened and ground shaft Precise and robust blade guides with adjustable carbide pads Longer saw blade service life due to 25° saw arm inclination Efficient coolant application directly at the blade guides Electromechanical blade tension monitoring – a microswitch shuts off the machine if deviation occurs Chip brush for optimal cleaning and maintenance of the saw band Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Saw cut performed with the selected band speed - Automatic stop of downward movement and saw blade at the lower end position - Automatic return of the saw arm to its upper home position - Vice opens automatically - Operator only needs to change/move material Equipment/features: - Two band speeds - Cutting position sensor - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions approx.: Length: 1860 mm Width/depth: 1045 mm Height: 1750 mm Weight: 405 kg Drive power: Power consumption: 1.5 kW Electrical data: Connection voltage: 400 V Machine data: Band speed(s): 20 - 100 m/min Nwjdpfxod Hx Uqj Ahwsc Speed settings: stepless Band length: 2720 mm Band width: 27 mm Band thickness: 0.9 mm Miter angle: +60° to -45° Cutting capacities: 0° round (pipe): 230 mm 0° round (solid): 150 mm 0° rectangular horizontal (hollow section): 280 x 180 mm 0° bundle (pipes): 180 x 120 mm -45° round (pipe): 195 mm -45° round (solid): 110 mm -45° rectangular horizontal (hollow section): 180 x 170 mm -60° round (pipe): 125 mm -60° round (solid): 80 mm -60° rectangular horizontal (hollow section): 120 x 100 mm +45° round (pipe): 185 mm +45° round (solid): 110 mm +45° rectangular horizontal (hollow section): 180 x 120 mm Feed table height (material infeed): 785 mm Min. remaining workpiece length: 22 mm

Kondisi: baru, Tahun pembuatan: 2026, diameter putar di atas sled silang: 690 mm, lubang spindel: 155 mm, diameter pembubutan: 1.090 mm, diameter pembubutan di atas alas geser: 1.000 mm, tinggi pusat: 500 mm, lebar di tengah: 700 mm, panjang pembubutan: 6.000 mm, lebar tempat tidur: 700 mm, kecepatan rotasi (maks.): 1.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Heavy-duty lathe with stepless speed control in 4 ranges. Digital position display / digital measuring system with constant cutting speed control • High main drive motor power: 30 kW as standard (applicable in the range of 5 - 1000 RPM) • Rigid main spindle with 132 mm bore • Bed width: 700 mm • Prism guideway, rigid cross slide Accuracy according to DIN 8607 • Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufactured by: FAG or SKF Spindle mount according to DIN 55027/15 • Hardened guideways 48 +/-2 HRC • Interlocked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear full-length chip and splash guard • Traversing front chip guard • Tip activation for main spindle • Enclosed, rigid feed gearbox with sliding gear blocks on multi-spline shafts • Central lubrication for carriage and cross slide • Central lubrication for headstock and feed gearbox • Feeds, metric and imperial threads without gear changes • Rapid traverse longitudinal, cross, and on compound slide • Safety shut-off for handwheel on carriage and hand crank on cross slide during rapid traverse • Feed direction change on carriage and additionally on headstock • Quick-change toolholder model D1 Graduated ring on carriage and tailstock handwheel • Graduations on tailstock quill 2-stage tailstock quill with ratios 1:1 and 1:4 • Electrically adjustable tailstock Nsdpeugwrgjfx Ahwjwc Support for leadscrew and feed shaft from 2000 mm centers • CE and declaration of conformity