Palet untuk machining center

WMW HECKERT CWK 630

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 1 used short bar loader Manufacturer: Breuning Model: ILS RBL 80/12 Year of manufacture: 2016 Itodpoht Rl Eofx Amvsl Clamping range: 5-80 mm diameter Bar length: 100-1200 mm

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. Itedpsr A Hcbsfx Amvsl • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Tahun pembuatan: 2002, Kondisi: belum diuji (bekas), Robot No control panel + connection cables Iodpfx Ajgu U Itomvjtl Used, untested robot. No tech pendant. Not tested.

Kondisi: bekas, Tahun pembuatan: 2003, Travel X 800 mm Travel Y 600 mm Travel Z 805 mm Control unit: Sinumerik 840D Machine weight approx. 13 t 1 horizontal machining center Manufacturer: HECKERT Model: CWK 500D Year of manufacture: 2003 Serial no.: 16087 Control, make: Siemens, type: Sinumerik 840D Travels X/Y/Z: 800 x 600 x 805 mm 2-station pallet changer Pallet size: 500 x 500 mm NC rotary table: 360 x 0.001° 60-position tool changer Tool holder: HSK 63 Max. spindle speed: 15,000 rpm Coolant through spindle (IKZ): 50 bar Operating hours: 32,450 Itjdpfouddgfex Amvsl Spindle hours: 6,080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Preparation for infrared measuring probe

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm Itjdpfx Amsht Hg Dsvel SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4501, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan rotasi (min.): 6.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Konfigurasi mesin: • UniSpeed3500 • Konveyor serutan pusat • Panel kontrol untuk pengoperasian samping & depan • Panggung kerja • Kursi berlapis busa • Jendela penglihatan samping Rotoclear • Lampu sinyal 3-warna • Penggerak utama hingga 6.000 rpm • Dudukan alat SK 50 BigPlus • Kepala frais ortogonal (Sumbu C 0,01°, Sumbu A 0,01°) Itodeygtqbjpfx Amvol • Siemens Sinumerik One • Unit kontrol pegangan HT2 • Meja putar Ø 1.600 mm, 8t • Segmen meja frais samping • ToolRunner untuk 90 alat • Sistem pendingin 950 l • Pompa pendingin 40 bar / 32 l/menit • Pergantian pendingin air/udara • Pistol pencuci di ruang kerja • Probe pengukuran nirkabel m&h • Sistem monitoring tabrakan saluran tunggal • Mode operasi 3 • Sistem pemurnian udara 4.000 m²/jam

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, DMG MORI DMF 360/11 linear — Pusat pemesinan universal, tahun pembuatan 2022, dalam kondisi sangat baik, selalu dirawat sesuai jadwal, siap untuk diperiksa kapan saja. Data teknis utama: Pengendali: Heidenhain TNC 640 Celos, 5 sumbu yang dikendalikan Jangkauan pergerakan: X 3.600 mm / Y 1.100 mm / Z 900 mm Kecepatan cepat X/Y/Z: 80/60/60 m/menit Spindel: 20–10.000 rpm, 44/32 kW, 288/187 Nm, SK 50 Meja putar NC: 4.200 x 1.100 mm, beban meja maksimum 1.200 kg Majalah alat: 120 posisi Peralatan: pendingin internal 40 bar, konveyor serpihan, sensor pengukur Heidenhain TS 460, pintu otomatis Itodpfezv U N Njx Amvol

Kondisi: bekas, Tahun pembuatan: 2017, en-GB Iedsyqybbopfx Amvotl

Kondisi: bekas, Tahun pembuatan: 2012, fräsmaschinen-20240612 Iodpfx Amey Nxc Novjtl

Kondisi: bekas, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: BT30 - Spindle motor power: 20 kW - Spindle speed: 24,000 rpm - Spindle running hours: 4,877 h LINEAR AXES - Travel X/Y/Z axes: 700/420/380 mm - Rapid traverse rate (X/Y/Z): 60 m/min TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 25 - Tool change time: 0.9 sec TABLE Isdpjxcqadefx Amvstl - Table size: 840/420 mm - Max. table load: 400 kg - Distance from table to spindle nose: 200–580 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive capacity: 16 kW WEIGHT AND DIMENSIONS - Space requirements: 1650/2950 mm - Machine height: 2550 mm - Machine weight: 3,400 kg MACHINE HOURS - Power-on hours: 14,493 h - Operating hours: 5,307 h EQUIPMENT - Control: Siemens 840D SL - Interface: Ethernet / RS232 / USB / PCMCIA - Synchronized tapping - 3-color status lamp - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant supply (TSC) - Chip conveyor - Tool measuring probe: Renishaw OTS - Workpiece measuring probe: Renishaw OMP40-2 - Electrical transformer