Mesin bending putar

WMW SBM 1000-1

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Ljdpod Hl Stsfx Aahjta Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Kondisi: baik (bekas),

Kondisi: bekas, Tahun pembuatan: 1997, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,000 mm Max. workpiece height: 1,250 mm Table size: 1,150 x 690 mm Spindle taper: MT 4 Spindle speeds: 40 - 1,400 rpm Feed range: 0.08 - 0.40 mm/min Horizontal arm travel: 800 mm Vertical arm travel: 700 mm Spindle stroke: 220 mm Drive power: 3.5 kW Ltjdpol Ha Twofx Aahea Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight approx. 1.6 t - Factory No.: A01/446/97 - Adjustable cube table 600 x 500 x 500 mm - Coolant device - Machine lamp

Kondisi: bekas, Rund trough vibratory finishing machine WALTHER TROWAL Type CLS-230 Serial No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Total trough outside height: approx. 650 mm Work bowl / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Power supply: 400 V, 50 Hz - Manual or timer-controlled operation - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights Ltodpfxefqpxie Aahea - Bowl with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in separation screen device after separator flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Functional description: Workpieces and abrasive media are set in motion by generated vibration and are mixed very gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Kondisi: sangat baik (bekas), Vertical bandsaw JAESPA Type MSU 4 Roller diameter: 420 mm Throat depth: 400 mm Table size: 615 x 615 mm Lsdpfx Aed Tx D Ujaheta Cutting height: 350 mm Saw blade length min. 3450 – max. 3640 mm Saw blade speed: 20 – 2500 m/min, stepless Power supply: 400 Volt, 50 Hz - Infinitely variable saw blade speed via 2 motor speeds, 2 gearbox stages, and stepless belt drive - Tilting saw table - 2 gearbox stages - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Grinding stone for weld seam grinding Space requirements (L x W x H): 1100 x 950 x 2000 mm Weight: approx. 700 kg Very good condition, immediately operational 2 identical machines in stock

Kondisi: baru, OPTIMUM OPTIsaw S275N Metal Band Saw Ltodpfx Aaeu R S Hpshsa - Exhibition machine - Continuously adjustable feed rate, swiveling design ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Blade speed: 45 / 90 m/min, Blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - New exhibition machine -

Kondisi: baru, Tahun pembuatan: 2025, The CORMAK HBS320 is designed for double-sided miter cutting within a range from -45° to +60°. The machine’s construction is based on solutions and designs developed by Polish engineers. Precision and accuracy place it at the forefront among band saws capable of cutting up to 320 mm in width. A key advantage of the machine is its latest-generation hydraulic cylinder. The unit features a reinforced vise base and a quick-release vise mechanism. Machine features The CORMAK HBS320 metal band saw enables material cutting at any angle from -45° to +60°. The workpiece can be fed manually or by any feeding device. The feed during cutting is gravity-operated, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After completing the cycle, the machine stops automatically, and the operator raises the arm to the start position. The saw arm is made from a very robust, single-piece gray cast-iron casting. Together with the 27 mm-wide saw blade, it ensures consistent multi-series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with a quick-clamp function. The blade guides use ball bearings and carbide inserts, ensuring exceptional accuracy and straightness of cut. This greatly influences blade tracking, longevity, and overall cutting quality. Carbide guidance significantly reduces both machine and blade wear. The base is a rigid welded body made from steel plates. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped as a tray for coolant drainage and chip collection during material cutting. The base is fitted with a cast-iron worktable with a double-sided pivoting arm and control panel. Feed speed is controlled from the machine’s panel. Two cutting blade speeds are available: 44 and 88 m/min. In the lower arm position–after the material is cut–the blade drive stops automatically. Safety is ensured by blade guards and micro-switches that stop the motor after a cutting cycle or when any safety guard is opened. Additional protection includes automatic shutdown if the blade breaks. Technical data Ø MAX – 260 mm (straight cut) H x W MAX – 320 x 160 mm (straight cut) POWER SUPPLY – 3-phase 400V TOTAL POWER – 1.5 kW ARM DESCENT CONTROL – Hydraulic cylinder BLADE DIMENSIONS – 2740 x 27 x 0.9 mm BLADE SPEED – 44 / 88 m/min VISE BASE HEIGHT – 920 mm DIMENSIONS – 1400 x 880 x 1550 mm WEIGHT – 280 kg Cutting parameters Angle 0º ----- ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 Ltsdpfxji D Dgwj Aahja 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 The listed price is NET. Price does not include shipping. For further information, please contact us by phone or email. Visit our website to browse our full offer.

Kondisi: bekas, Tahun pembuatan: 1976, Diameter putar di atas tempat tidur: 0560 mm Ltodpfxjt Tqgxe Aahea Diameter putar di atas dudukan: 350 mm Panjang putar: 1500 mm Lubang spindle: 65 mm Kecepatan spindle: 16-1250 rpm Feed melintang: 0,050-24,0 mm/putaran Feed muka: 0,039-18,86 mm/putaran Total daya yang dibutuhkan: 9 kW Berat mesin kira-kira 4,5 t

Kondisi: bekas, nomor mesin/kendaraan: 242350148, Here we offer a bench drill machine manufactured by Flott, model TB23L. The bench drill is mounted on a special lift table (not the original lift table). Technical data: - 6-speed manual spindle speed adjustment (via belt pulley) - MK2 taper Lsdslf Evcopfx Aahota

Kondisi: baru, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed, variable ----- 50 - 3000 rpm Quill travel ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Throat ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 kg STANDARD ACCESSORIES * Drill chuck incl. drill holder * Digital depth stop * Digital spindle readout * Fine adjustment * Left / Right rotation selection * Milling head rotatable 90 degrees left / right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling vice * ISO30 collet holder & 12 collets in case Ltedpfx Aajga T Agshea * Milling cutter set