Mesin bor meja

Wotan C 105 D

Kondisi: baru, Cutting diameter: 170 mm Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Ledpfx Apeg Trvrstjrn Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-001 Ledpfx Apjykb Hfetorn

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 78.977, Perlengkapan: dokumentasi / manual, Tahun pembuatan: 1981/ Tahun retrofit: 1996/1997 Lodpfx Apoqc Umgetjrn Kontrol: Siemens 840 C Kontrol Siemens untuk sumbu X/Y/Z/W/U/B/V Diameter spindle: 200 mm Motor utama Siemens: 68 kW Putaran spindle: Tingkat I: 3 - 202 rpm Tingkat II: 180 - 808 rpm Perjalanan X: 12.000 mm Perjalanan Y: 4.500 mm Perjalanan Z: 2.400 mm (lengan penjepit □ 520 mm/jangkauan 1200 mm + sumbu W 1200 mm) Spindle taper: SK60 (SK50) Pelat penekan: ya Kepala frais: 2 buah Persiapan untuk meja putar CNC (sumbu ke-4) Tanpa meja putar dan bidang pelat (tersedia secara terpisah) Dokumentasi lengkap Berat sendiri: sekitar 140 ton Video tersedia!

Kondisi: baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 3.500 mm, Technical Specification - X-Axis (Longitudinal Travel, Table): 12,000 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm Lrsdoyuxd Nspfx Apten - Y-Axis (Vertical Travel, Column): 3,500 mm - Programmable Feed Rate: 0.5 – 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Rated Motor Torque: 42 Nm Z - W Axis (Spindle Head): - Boring Spindle Diameter: 150 mm - Axial Stroke, Boring Spindle (Z): 1,200 mm - Rapid Traverse, Z Axis: 20,000 mm/min - Boring Spindle Taper: DIN 69871, ISO 50 - Spindle Head Diameter: 254 mm - Bearing Inner Diameter, Spindle Front: 200 mm - RAM Dimensions: 400 x 400 mm - Axial Stroke RAM (W): 1,000 mm - Rapid Traverse, W Axis: 15,000 mm/min - Total Axial Stroke (Z+W): 2,200 mm - Rated Torque, Spindle Motor W and Z Axis: 42 Nm - Number of Gear Spindle Stages: 2 - Spindle Speed Range: 6 – 3,500 rpm - Spindle Motor Power: 60 kW Clamping Plate Fields: - Dimensions: 2 units at 1,500 x 4,500 mm, 1 unit at 2,000 x 4,500 mm - Load Capacity: 15,000 kg/m² Workpiece Table (Axis V1-B1 / V2-B2): - Table Dimensions: 2,000 x 3,000 mm - T-Slot Size: 28 mm - T-Slot Pitch: 180 mm - Table Top Height from Floor: 650 mm - Load Capacity: 40 t Tool Rack Magazine ATC 13-150 R 147: - Max. Magazine Capacity: 147 tools - Max. Tool Weight: 35 kg - Max. Tool Length: 700 mm - Tool Taper: DIN 69871 - Tool Change Time: 28 sec Milling Head with Indexed Vertical Axes, Model TTL 2 18 360 - Tool Holder: ISO 50, DIN 69871 EQUIPMENT: - CNC Control: Heidenhain iTNC 530 - Electronic Handwheel - Chip Conveyor (Year of Manufacture: 2023) - CE Marking - Documentation

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 43.202 h, Fungsionalitas: berfungsi sepenuhnya, Doosan Lynx 2100LM – Mesin Bubut CNC SPESIFIKASI • Kontrol: Siemens S828D • Kecepatan spindle utama maks.: 6.000 rpm • Daya motor spindle utama: 12,6 / 10,5 kW • Daya alat berputar: 6,2 / 4,1 kW • Jumlah posisi alat: 12 • Chuck hidrolik 3 rahang: 170 mm • Diameter putar (ranjang/menara): 600 / 400 mm • Maks. benda kerja: Ø 300 x 510 mm • Diameter batang maks.: 51 mm • Rapid traverse (X/Z): 30 / 36 m/menit • Waktu pergantian menara: 0,11 detik • Ruang gerak: o X: 205 mm o Z: 560 mm • Dimensi mesin: 2540 x 1595 x 1693 mm • Berat mesin: 3.480 kg Perlengkapan Lrjdpfsya N Ipsx Aptjn • Pendinginan tekanan tinggi, 0,7 MPa • Pengukur alat • 8 dudukan alat tetap dan 4 dudukan alat berputar • Tailstock • Chuck collet • Penangkap benda kerja • Persiapan feeder batang • Feeder batang LNS 3 m • Konveyor serpihan (LNS MH500)

Kondisi: bekas, Mesin Frais Universal Merek: OPTIMUM Model: MT 100 Tahun produksi: 2018 – telah dicek bengkel No. mesin: J33021808035 Pemeriksaan geometris dengan protokol pengujian Lrsdpfow Rlvqex Aptsn Perlengkapan: - Layar digital 3-sumbu DPA 2000 - Kepala frais vertikal SK 40 dengan ulir pengikat M 16 - Meja tetap 1.120 x 260 mm (alur-T: 14 mm) - Lampu mesin - Perangkat pendingin cairan - Pelumasan sentralis manual - Buku petunjuk pengoperasian Bekas, dijual apa adanya, tanpa garansi Mesin secara teknis sesuai dengan standar tahun produksinya.

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Lrjdpfolhwr Rjx Aptjn Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Maximum tool slide stroke 760 mm Maximum rack length 610 mm Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP Lrjdpod Nw Ttefx Aptjn

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, Fungsionalitas: tidak berfungsi, tinggi pembubutan: 1.900 mm, berat benda kerja (maks.): 15.000 kg, diameter pembubutan: 2.630 mm, diameter pelat muka: 2.500 mm, tinggi total: 5.000 mm, lebar total: 4.800 mm, panjang total: 4.800 mm, diameter meja putar: 2.500 mm, beban meja: 15.000 kg, diameter meja: 2.500 mm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, berat keseluruhan: 38.850 kg, kecepatan meja: 2.500 mm/menit, SC2700 Vertical Turning Lathe 2700 dengan 2 Kepala Kerja - Retrofit Selesai Spesifikasi: Status retrofit: baru saja di-upgrade (sistem mekanik, listrik, hidrolik), dalam proses penyambungan daya. Panel listrik: peralatan listrik baru, kabel, kabel port, penutup. Motor utama: asli 55 kW, sudah direvisi. Kondisi: secara mekanis seperti baru, jam kerja rendah. Inspeksi: tersedia kapan saja. Lredpfoygldgsx Aptsn Atas permintaan, dapat dinaikkan untuk menampung benda kerja yang lebih tinggi, atau mendapatkan upgrade CNC. Harga, instalasi, dan transportasi atas permintaan. Spesifikasi teknis lebih lanjut tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2025, tinggi pembubutan: 2.000 mm, berat benda kerja (maks.): 12.000 kg, diameter pelat muka: 2.000 mm, CNC vertical turning center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø3,000 mm Max. turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical travel): 1,200 mm Drive spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Cross rail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Splash guard: table version (R-type standard) External coolant system: 3 bar (80 l/min) Chip conveyor: hinged belt type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions – on request Automatic shutdown for N.C – on request Turning tool holder type 240 TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Ljdpoxqb D Nofx Aptsrn Linear scales X, Z axes – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL RUN, AND TRAINING – not included in the price INSURANCE AND TRANSPORT – not included in the price Subject to change and errors in technical data. The accessory scope is defined exclusively and within the scope of the textual article description. No claims can be made for any additionally pictured accessories, e.g. for illustrative purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.