Pendingin penyerapan air panas

York YHAU-CL100 EXE

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Ibedpfx Aeyidvdjb Hob Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: baik (bekas), Data teknis: Isdpfjf N Hdxsx Ab Hjbb Motor penggerak / Motor Jumlah: 4 unit tersedia Produsen: SEW Eurodrive Kondisi: Baik (bekas) Daya: 50Hz/ r/min 1461/228 KW 1,5 S1 Solusi yang disesuaikan untuk intralogistik Anda Untuk conveyor rol, conveyor sabuk, conveyor miring, atau teleskop untuk proses bongkar-muat barang Anda, kami adalah mitra profesional yang dapat Anda andalkan! Kami dengan senang hati akan menyiapkan penawaran khusus sesuai kebutuhan Anda, atau memberikan konsultasi terkait perancangan dan pertanyaan instalasi. Cukup informasikan kebutuhan dan kondisi lapangan Anda kepada kami. Manfaatkan pengalaman kami yang telah lama di industri ini serta jaringan ahli yang luas. Kami telah berhasil merealisasikan berbagai proyek untuk perusahaan dari beragam sektor—seperti logistik, industri farmasi, kerajinan, dan elektronik. Bersama Anda, kami akan mengembangkan solusi untuk mengoptimalkan alur proses dan arus material Anda secara hemat biaya dan berkelanjutan. Bahkan teknologi sortir otomatis sepenuhnya atau komponen tambahan seperti rak pengambilan barang (pick rack) maupun wadah juga dapat kami tawarkan.

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 372 h, jenis bahan bakar: diesel, produsen motor: 4045HP551-SV, Tujuan penggunaan: konstruksi Berat kosong: 2.960 kg Daya generator: 110 kVA Dimensi ruang kargo: 3640 x 1200 x 2295 cm Volume tangki air: 1.100 l Hubungi Departemen Penjualan untuk informasi lebih lanjut. Iodpfswgvq Esx Ab Hjbb Lebih dari 85 tahun pengalaman penjualan di Belanda. Tim ahli yang mencari solusi sesuai kebutuhan Anda. 1.000 jam atau garansi 1 tahun: keamanan optimal. Tersedia 24 jam sehari dan tujuh hari seminggu. Layanan cepat. Stok besar, siap kirim langsung.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 390 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 827 kg, Carrier chiller air water Model: 30RBS-140B0181-ME, tahun 2016, R410A 135 kW (116.100 frigoria), hanya dingin, konsumsi maksimum: 61 kW. Dimensi: 2258x2050x1330 mm, heat exchanger tipe pelat, berat: 827 kg. Mesin telah diuji sepenuhnya di gudang kami dengan gas, dapat diperiksa. Iedpfsyfwuzox Ab Hobb Referensi: 1137

Kondisi: baru, Unit ini baru, lengkap termasuk sistem kendali, tangki bahan bakar diesel, knalpot, dan baterai. Deskripsi Model: Generator Set NWR75 Ricardo Motor Newpower Daya kontinu: 60 kVA / 48 kW Daya maksimum: 66 kVA / 52 kW Mesin: Kofo Ricardo N4105ZDS, 4 silinder, berpendingin air Koneksi: Pemutus daya Frekuensi: 50 Hz. Tegangan: 400/230 V Termasuk: Pengatur kecepatan mekanis, AVR, pengisi daya baterai, peredam suara, pemanas air pendingin, Unit kendali: Comap AMF8, koneksi ke jaringan listrik Ibedpfxsmdqw Ej Ab Hsb Dimensi: 2430x1030x1260 mm. Berat: sekitar 1166 kg Tangki bahan bakar diesel: 125 L. Pemantauan jaringan, koneksi ke jaringan listrik, terisolasi suara Siap digunakan. Biaya tambahan Sakelar transfer otomatis 100A: € 709 Pengiriman: - Pengangkutan ke seluruh dunia termasuk bongkar muat dimungkinkan dengan biaya tambahan - Untuk memberikan harga pengiriman yang akurat, silakan kirimkan permintaan dengan data dan alamat lengkap Anda.

Kondisi: bekas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, but part of the magnetic coupling has been removed. Ibodpfjfupadjx Ab Hjb Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Performance at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump construction - Made of stainless steel 1.4401 - The pump is as new and was used as a parts donor, but includes several new pump chambers - Part of the magnetic coupling is missing Suitable for drinking water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg As new condition Not a submersible or immersion pump.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 800 kW (1.087,70 hp), berat keseluruhan: 4.500 kg, Perlengkapan: kompresor, pendingin beku, Chiller unit Trane RTUB224 Cooling capacity: 800 kW Number of cooling circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar Ijdpfjrzq Arjx Ab Hebb The specified cooling capacity is based on a water outlet temperature of +7°C with a condensing temperature of +40°C.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Air handler dengan teknologi EC untuk pendinginan atau pemanasan ruangan, kapasitas pendinginan dengan unit chiller 150 kW pada 7/12°C, kapasitas pemanasan 300 kW, aliran udara 20.000 m³/h, 4 outlet udara 500 mm, desain kompakt. Ijdpfx Ajfzrgyjb Hebb

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), X/Y/Z travel: 2500mm/900mm/800mm, spindle speed: 18,000 rpm, spindle power: 35 kW, max. table load: 3,000 kg, tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500mm/3,000mm/3,000mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D, operating hours: 55,730h, spindle hours: 18,696h. Z-axis brake defective, machine enclosure shutter defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. Inspection on site possible. Ibedpfjvamqdox Ab Hsb

Kondisi: bekas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017 Equipped with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Traverse paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/– 135° (270°) B-axis 360° infinite Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7,500 N Feed force Z-axis 10,000 N Positioning tolerance (X/Y/Z) 0.008 mm Swivel speed A-axis 180° rotation in 4 sec. Interference circle diameter in the swiveling bridge max. 1400 mm Transport load in the swiveling bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle output 37 kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent pockets occupied Ø 140 mm Tool diameter with adjacent pockets empty Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Pneumatic connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37 kW/40% duty cycle) with liquid cooling and recooling device - 2-axis rotary tilting table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary axis’s table - Double pallet changer, without pallets (new pallets must be procured) - Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, as disc turret - Machine designed for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper-belt chip conveyor, ejection height 1,150 mm - Licon ECO-Mode (energy-efficient operation of aggregates) - Direct position measuring system in all axes Iodpfot Ac Efsx Ab Hebb - Logged operating hours with control voltage on = approx. 7,500 h Space requirement for operation L x W x H 9,000 x 5,000 x 3,800 mm Space requirement for transport L x W x H 6,100 x 4,400 x 3,600 mm Basic machine weight approx. 21 t Total weight: approx. 24 t Very good condition