Meja mesin

ZwickRoell BZ1,0 / TH1S

Kondisi: bekas, ALZMETALL AB 3 ESV Column Drilling Machine Machine no.: 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Spindle taper: MK 3 - short quill Bwsdpfxsharwve Akben Distance spindle nose to table: 545 mm (short quill) Distance spindle adapter to table: 395 mm (Morse taper adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 2 gearbox stages, 2 motor speeds, and stepless via variator gearbox - Pre-stage for high torque at low speeds - Morse taper adapter from MK3 to MK4 - Automatic feed: 0.1 – 0.2 – 0.3 mm/rev - Rotatable drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg In good condition.

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Bedpjlhwr Refx Akbswn Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Kondisi: sangat baik (bekas), Zwick Type: BZ2.5/TN1S Zwick Tabletop Testing Machine for Tensile Strength Measurement Application Range: Wide range of applications, from the testing of plastics and elastomers, to paper, textiles, foam, wire, and component testing. Bjdpfx Aefnm Dqokbown Load Frame: Maximum test force FN in tension/compression: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Workspace height h min ... h max: Crosshead bracket mounted facing upwards: 227 ... 573 mm Crosshead bracket mounted rotated by 180°: 57 ... 403 mm (each without connecting bolts) Connections: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change; errors and omissions excepted!) We are happy to answer further questions by phone.

Tahun pembuatan: 2011, Kondisi: baik (bekas), 24370 Bodpfx Ajt Srkpekbswn

Kondisi: baru, Tahun pembuatan: 2025, * 250 L net volume * Dosing pump included * Highly wear-resistant polyurethane lining (90 Shore) * High-performance three-phase drive motor * Interchangeable valve for wastewater discharge Bwsdpfsh I N Udex Akbon * Main switch and emergency stop switch * Timer and operating hours counter * Specially designed control panel (EU standards) included

Kondisi: sangat baik (bekas), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Bwodpjr Ixq Rofx Akbsn Accuracy: ± 0.5% Max. stroke: 700 mm (without device) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) We will be happy to answer further questions by phone.

Tahun pembuatan: 2024, jam operasional: 4 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H2,5TMNI, Universal testing machine H 2.5 TMNI L Please always include your email address. Mechanical construction: Single-spindle universal testing machine with backlash-free ball screw in C-frame construction, with spindle guard and brushless drive motor, Fmax = 2.5 kN 1 working space up to nominal load: Working space depth: 105 mm Max. test stroke without test tools, adapters, and KMZ: 1375 mm Max. test space height (between lower fixed and moving crosshead) without test tools, adapters, and KMZ: 1375 mm Traverse speeds: Testing speed 0.005 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measurement range depending on the force sensor used: 0.4 - 100% of nominal load, Class 1 (optional Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on the integration time: between +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If factory or DAkkS calibration is to be carried out at the installation site at the customer's request, this service must be charged separately. Crosshead travel measurement: Bjdpfomdn Trsx Akbjwn Incremental square-wave input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Kondisi: perlu perbaikan (bekas), panjang pembubutan: 400 mm, lubang spindel: 75 mm, kecepatan spindel (maks.): 3.800 rpm, general information about the machine offered here is a used lathe from the manufacturer Okuma. The machine is being offered as a source of spare parts. The machine runs, however, not all functions can be guaranteed. The keys for operation are missing. The machine is stored at our warehouse and can be inspected under power. technical data – CNC control: OSP 5000L-G CNC system (German) – Tool turret: 12 positions – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Spindle bore diameter: 75 mm – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm – Cutting speed XZ: 0.01-1000 mm/rev – Rapid traverse up to: 12,000 mm/min Bwodsugmzkepfx Akbon – Power supply: 380V – Rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (W x D x H): 3.9 m (with chip conveyor) x 1.8 x 1.8 m – Machine weight: 4500 kg

Kondisi: baru, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Functional Equipment: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return flow of the circulation and cooling water inlet - Reversing unit for leak stop operation - Manual tool drainage via leak stop operation and actuation of a vent valve at the rear of the unit - Monitoring of filling time and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling spout, interface cable, mechanical flow meters Bjdpfefnvvisx Akbown *Electrical Functional Equipment: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, on terminal at rear of controller - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - CEE plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tube heating elements made from Incolloy - Device mounted on castors, two of which are steerable and with brakes - Additional temperature safety device for secure disconnection of the heater at the heating downstream circuit breaker *Cooling: Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Threaded socket G3/8" F (Capacity specified at 80°C supply and 15°C cooling water temperature, and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Flow rate (max.): 40 l/min Delivery pressure (max.): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions / Weight / Colour: Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: Threaded socket G1/2" Cooling water: Threaded socket G3/8" Filling (option) *This device conforms to European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be listed in quotations and/or order confirmations.

Kondisi: bekas, CNC tool milling machine MAHO type MH 400 E Machine no. 43072 Year of manufacture: 1989 Travel paths X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with pull stud type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y) 2.5 m/min Quill stroke vertical 50 mm Spindle drive 2.2 kW Power connection 400 volts, 50 Hz, 19 kVA - Swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swiveling device for vertical milling head - Splash guard enclosure as a table housing with 3 upward-folding doors - Electrical control cabinet permanently mounted on the machine - V24 interface (RS 232) for data transmission - 52,470 operating hours, main switch on - Rigid angle table - Coolant device with coolant pump located next to and under the machine - Centralized lubrication system Vogel - Operator manual, electrical diagram Required space (L x W x H) 2250 x 1800 x 1850 mm Weight approx. 1.5 tons Good condition Bjdeh Ic Ufepfx Akbswn