Mesin pembengkokBluhm Systeme
e-SolarMark FL
Mesin pembengkok
Bluhm Systeme
e-SolarMark FL
harga tetap ditambah PPN
€4.800
Kondisi
Bekas
Lokasi
Borken 

Data mesin
Harga & Lokasi
harga tetap ditambah PPN
€4.800
- Lokasi:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Hubungi
Rincian penawaran
- ID iklan:
- A22186232
- Nomor referensi:
- 23922
- Pembaruan:
- terakhir pada 23.06.2026
Deskripsi
Bluhm Systeme Marking Laser
We offer you a Bluhm Systeme marking laser.
Bluhm Systeme Fiber Laser e-SolarMark FL
No functional guarantee (untested)
Introduction:
The e-SolarMark FL 10W and 30W are class IV lasers in accordance with IEC 825 and EN 60825 guidelines (standards for end-user applications). The device is designed to be integrated into a system or operated as a standalone unit with a protective housing. After installation, the laser system must meet the protective class product requirements according to the aforementioned guidelines.
Godpozgci Eofx Aa Deud
The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion.
Technical Specifications
e-SolarMark Description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) and focusing lens.
2. The control unit, including power supply, electronic control system, and firmware for system operation, as well as internal I/O slots.
The e-SolarMark features a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser Specifications (Standard Version)
Laser type: fiber laser
Laser output power: FL2 model: 19W, typical
Wavelength: 1062 nm, typical
Internal modulation: 20 to 80 kHz
Scanner Head Description:
Scan head: Two galvanometric mirror scanners with hard, highly reflective dielectric coating.
F-Theta
Lens types and properties:
Marking field lens: 70 x 70 mm up to 300 x 300 mm
Focal distance: 192 mm
Operating Environment Conditions:
Relative humidity: Up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15 - 25°C
Dimensions (W x H x D):
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length (marking/control unit): 3 m
Weight
Marking unit: 5 kg
Control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption (FL2 model): 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: see picture
(Subject to technical changes and errors. All data and information are non-binding!)
For further questions, we are happy to assist you by phone.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
We offer you a Bluhm Systeme marking laser.
Bluhm Systeme Fiber Laser e-SolarMark FL
No functional guarantee (untested)
Introduction:
The e-SolarMark FL 10W and 30W are class IV lasers in accordance with IEC 825 and EN 60825 guidelines (standards for end-user applications). The device is designed to be integrated into a system or operated as a standalone unit with a protective housing. After installation, the laser system must meet the protective class product requirements according to the aforementioned guidelines.
Godpozgci Eofx Aa Deud
The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion.
Technical Specifications
e-SolarMark Description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) and focusing lens.
2. The control unit, including power supply, electronic control system, and firmware for system operation, as well as internal I/O slots.
The e-SolarMark features a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser Specifications (Standard Version)
Laser type: fiber laser
Laser output power: FL2 model: 19W, typical
Wavelength: 1062 nm, typical
Internal modulation: 20 to 80 kHz
Scanner Head Description:
Scan head: Two galvanometric mirror scanners with hard, highly reflective dielectric coating.
F-Theta
Lens types and properties:
Marking field lens: 70 x 70 mm up to 300 x 300 mm
Focal distance: 192 mm
Operating Environment Conditions:
Relative humidity: Up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15 - 25°C
Dimensions (W x H x D):
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length (marking/control unit): 3 m
Weight
Marking unit: 5 kg
Control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption (FL2 model): 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: see picture
(Subject to technical changes and errors. All data and information are non-binding!)
For further questions, we are happy to assist you by phone.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Kirim permintaan
Telepon & Faks
+49 2861 ... iklan
Iklan Anda telah berhasil dihapus
Terjadi kesalahan





















