Mesin penyikat, mesin penataan

- Italy Master 800.2

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Rodpfx Ajwwiybjd Rsr Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed Redpsk Dpp Ssfx Ad Rjr - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Tahun pembuatan: 2022, Kondisi: baru, Mehrblattsäge für präzises Schneiden von Kleinteilen, insbesondere für die Herstellung von Bienenrahmen. - Antriebsleistung: 11 kW - Spindeldurchmesser: 70 mm Redpfx Aoh Hxyced Rsr - Anzahl der Sägeblätter: 10 - Sägeblattdurchmesser: 210 mm - Minimale Werkstücklänge: 100 mm - Maximale Werkstückhöhe: 40 mm - Vorschubgeschwindigkeit: 4–8 m/min - Schnellwechselsystem für Sägeblätter

Kondisi: bekas, de-hu-it-lt-001 Rodpfexmh U Hjx Ad Rer

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, tinggi pusat: 165 mm, lebar di tengah: 635 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 30 rpm, berat keseluruhan: 900 kg, Sehr geehrte Damen und Herren, Rsdou St S Ajpfx Ad Rsr We offer for sale a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully operational and can be inspected and tested on site at any time. Availability: Immediate Distance between centers: 635 mm Center height over bed: 165 mm Center height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Rjdpfx Adswwl Nle Ror Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: bekas, Tahun pembuatan: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Grinding unit swivels via handwheel - The machine base, made from welded steel, ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be switched on as needed - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table for utilizing the entire belt width - Auxiliary table for sanding radii with integrated extraction ports - Spring-loaded belt tensioner automatically compensates for belt length differences - Equipped with adjustable stops, ideal for veneer sanding - Excess veneer can be sanded off effortlessly - With chassis - Oscillation motor power: 0.11 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding area length: 800 mm - Sanding area width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm Rodpfx Ajwkbcbed Rjr - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short term Location: Flörsheim

Tahun pembuatan: 2025, Kondisi: baru, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: Rsdpfx Adogn Tzls Ror + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure assistance + Bellows cover for column and leadscrew + Including foundation bolts and mounting template Grinding tools available as options Request more information

Kondisi: baru, Tahun pembuatan: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Rsdjug Ty Hspfx Ad Rjr 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Feed drive motor power: 0.37 kW Machine length: Machine width: Weight:

Kondisi: sangat baik (bekas), Four-Side Planer Weinig Unimat 500 Working width: 230 mm Rjdpfx Asthk T Isd Ror Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure rollers divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber outfeed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Work tables manufactured with Marathon Coating technology CE certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)