Mesin penyikat, mesin gerinda, mesin deburring

- Italy MASTER ROTOR 400 DOUBLE

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Lsdpov Si Szofx Al Njrp Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 400 mm, panjang mata gergaji pita: 5.550 mm, lebar pita gergaji: 80 mm, panjang meja: 800 mm, lebar meja: 1.060 mm, tinggi kerja: 400 mm, pl-hu-001 Lodpfow H Rq Hex Al Norp

Kondisi: baru, Tahun pembuatan: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotor brushes, Ø 115 mm, each with a 3 kW motor Lrsdpfx Ajug Ty Hol Nsp 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Feed drive motor power: 0.37 kW Machine length: Machine width: Weight:

Kondisi: baru, The new Holzprofi Maker cylinder brush and sanding machine can be converted from a sanding machine to a brushing machine in just a few seconds, quickly and easily. This versatile unit is ideal for smaller workshops, as it combines two machines in one. Benefits and Features: - Versatile options for surface treatment - Fast and easy conversion from sanding to brushing - Wide choice of brushes available for diverse effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Extension table dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Dust extraction port: Ø100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Optional Accessories: Ljdpfx Alswzzivo Nsrp - Structuring brush for even and textured surfaces - Sanding flap brush for finishing and surface preparation - Steel wire brush for a used-look finish and a pronounced grain effect

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Item number: 8143983 Lredjvzxg Topfx Al Nop Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit, ideally suited for industrial applications. It ensures precise control of movement sequences and plays a central role in automation processes as well as robotic systems within manufacturing. Its sturdy construction guarantees consistently reliable performance, even in the most demanding environments.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 460 mm, Rentang pemotongan baja bulat pada 90°: 150 mm, tinggi kerja: 1.030 mm, Mesin gergaji bundar otomatis dengan potongan lurus MSK 471 NA untuk mata gergaji HSS dan logam keras Lredpfx Alsubbw Ae Nop Rentang pemotongan: bundar hingga 150 mm, persegi hingga 140 mm Cocok untuk hampir semua bentuk profil dan material padat Penyortiran potongan otomatis menggunakan penjepit potongan Mesin telah diperiksa oleh KALTENBACH, suku cadang yang aus telah diganti.

Kondisi: baru, Typ 1300-2S Arbeitsbreite: 1300 mm Minimale Werkstücklänge: 400 mm Arbeitshöhe/-dicke: 2–80 mm Geschwindigkeit der Schleifwalze: Frequenzgesteuert Vorschubgeschwindigkeit: 5–20 m/min Gesamtanschlussleistung: 6,27 kW Transportmaße (LxBxH): 1700 x 2100 x 1400 mm Lrodpom Dr Rgofx Al Nep Gewicht: 1200 kg Preis: 6100 EUR (ab Werk Jonava, Litauen)

Kondisi: baru, Tahun pembuatan: 2024, Lebar kerja: 600 mm Tinggi kerja: 5 mm hingga 300 mm Lrodpfx Alsupy Spo Njp Panjang benda kerja minimal: 250 mm Agregat: 2 1. Agregat pemotong gergaji Random System: Tampilan potongan gergaji 2. Sikat: Tynex, diameter 210 mm Pengaturan tinggi: elektrik Indikasi tinggi: digital Kecepatan umpan: 4 - 14 m/menit Daya motor agregat gergaji: 1,1 kW Daya motor sikat: 4 kW Daya motor pengumpan: 0,37 kW Panjang mesin: 1400 mm Lebar mesin: 1500 mm Tinggi mesin: 1600 mm Berat: 700 kg

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Lrsdpjd Hintsfx Al Nep Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Unit Kontrol Lrjdpfjx H Uz Nox Al Nsp Merek: HAAS Model: Sigma 5 Penggerak Utama Jumlah sumbu: 2 HAAS TR160 dengan Sigma 5 ini diproduksi tahun 2016. Mesin ini memiliki meja 2-sumbu dan dilengkapi dengan motor servo Sigma 5, memastikan operasi yang presisi dan efisien. Cocok bagi yang ingin meningkatkan kemampuan permesinan mereka. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Peralatan Mesin Lainnya