1.500 pcs kotak plastik LENOX LB 6040

1.500 St. LENOX Kunststoffkisten LB 6040 LB 604022 Volumen 43,7l, L 60cm B 40cm

Kondisi: baik (bekas), MNA-AGL-MAC051 Iedpfx Ajtu N A Tsfiotf

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: Itjdpfx Afsfv Awasiof • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings.

Kondisi: sangat baik (bekas), Tang las titik berpendingin air, dioperasikan secara manual DALEX Tipe A 3119 dengan mekanik langkah ganda dan setopan langkah pendek Langkah pendek 25 mm - Langkah panjang 57 mm dengan sakelar gaya elektroda dan konverter sekunder untuk kontrol arus Daya nominal pada 50% ED: 8 kVA Arus hubung singkat sekunder: 9,5 kA Gaya elektroda: 180 daN Ijdpsg Ew H Nofx Afiotf Jarak antar lengan: 120 mm Jangkauan lengan: 250 mm dengan kontrol pengelasan sinkron RS 11-2 Sakelar utama, kabel sambungan, dan steker CEE 16 A Stok lengkap lengan elektroda berpendingin air tersedia

Kondisi: baru, Pressure: 17.0 kN Itedpsfv Avvsfx Afijf Stroke: 40 mm Throat depth: 110 mm Working height (min-max): 70 - 220 mm Table dimensions: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle Lever Pneumatic Presses Including precise working height adjustment via bevel gear with side-mounted crank—easy and convenient to adjust. Toggle lever pneumatic presses are used whenever maximum pressing force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: L23001388, berat keseluruhan: 208 kg, kapasitas tangki: 14 l, jenis pendinginan: air, tegangan masuk: 380 V, Semi-industrial machine designed for kneading dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to the production of short-cut, long-cut, and ribbon pasta. Suitable for medium-scale pasta production and for supplying dough ribbons to cutters or nest makers. All parts in contact with dough, as well as the entire structure, are made of stainless steel. Kneaders and auger are easily removable for cleaning. Comes equipped with an automatic cutter and a full set of knives. Additionally, I have a brand new set for penne pasta production for sale (2,200 euros). Itodpfjw Av Snex Afisf

Kondisi: sangat baik (bekas),

Kondisi: baru, Pressure 2.5 kN Stroke 45 mm Throat depth 90 mm Working height from 80 to 220 mm Table surface 120 x 60 mm Itodpfx Asfv Av Ijfief Machine weight approx. 22 kg Dimensions (L x W x H) 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion mechanism. It is used wherever a constant pressure is required during the working process. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, Centrally milled T-slot to DIN 650, T-slot nuts fit precisely.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, gaya penekanan: 15 t, Hidralmac Single-Column Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact, hydraulic single-column combination press from the manufacturer Hidralmac with 15 t pressing force. This machine is designed as a manual special-purpose solution and is particularly well-suited for flexible assembly, straightening, and pressing operations in workshop and service environments. ==== Technical Data & Information: Hydraulic Single-Column Press – 15 t – Manual ==== General Specifications - Manufacturer: Hidralmac - Model: Single-Column Press / Assembly Press - Design: C-frame press / manual combination press - Pressing force: 15 t - Machine weight: approx. 330 kg - Stroke: 160 mm ==== Hydraulics - Drive: hydraulic hand pump - Oil tank capacity: 10 l (AW 46) - Return: spring-assisted ==== Construction - Robust machine body according to DIN 8651 - Material: construction steel ASTM A36 - Cylinder: induction-hardened and chrome-plated - 4 support feet with M30 holes for floor anchoring ==== Working Area & Geometry - Throat depth (back wall to tool center): 280 mm - Daylight opening: - Swivel table: 450 mm - Auxiliary table: 650–800 mm ==== Table & Tool Mount - Swivel assembly table: 180° to the right - Central table bore: 60 mm - T-slots: M12 - Auxiliary table: 270 × 200 mm, with 60 mm center bore - Tool holder: M30 in cylinder head - Pressure plate: hardened, Ø +10 mm larger than cylinder ==== Additional Features - Rotating mandrel adapter: 1.5 t mechanical, with brake - Travel path of mandrel: 220 mm - Storage trays for auxiliary tables integrated into the base ==== Operation - Hand pump operation (lever motion) - Low maintenance and reliable thanks to simple mechanics Ijdpofhcc Ijfx Afijtf ==== Paintwork - Machine body: RAL 5012 (blue, textured paint) - Attachments: RAL 7021 (anthracite) ===== Assembly works, straightening works, pressing tasks, workshop applications, service assignments, small batch production Hydraulic press, single-column press, C-frame press, workshop press, hand press, assembly press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, meeting all aspects of the national Brazilian safety guideline NR 12, which is based on these standards. Our key strength is special-purpose machine construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Kondisi: bekas, Hand-operated folding machine KRAMER Type AMS 650 x 1.5 Manual folding machine, bending bench Year of manufacture: approx. 1985 Working length: 650 mm Sheet thickness at 40 kg/mm²: 1.5 mm Itjdpfx Afodzqaasisf Upper beam opening: approx. 60 mm Bending beam adjustment: approx. 0-25 mm Bending angle: 0-180° - Upper beam adjustment via hand crank - Clamping rail for the bending beam - One-piece sharp rail 135° Space requirements (L x W x H): 1200 x 600 x 1100 mm Weight: 160 kg Good condition

Kondisi: baru, Height of table: 650 – 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Isdpfefk E Dzjx Afistf Table width: 1480 mm Table length: 1980 mm Weight approx.: 491 kg This allows the user to flexibly adjust the working surface height to the specific requirements, thereby improving efficiency and ergonomics. Height adjustment is performed as standard via a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). The worktop also features a 100 x 100 mm grid of Ø 28 mm holes, similar to the SST fix series. When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, testing) can be adapted to the clamping table height of the respective machine. Table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for attachment and safety, have proven ideal for maintaining injection moulding and die casting tools. Immediately after removal from the machine, tools can be safely serviced on-site and transported to maintenance for repairs as required. Thanks to the fully bolted design of the clamping plate, worn work surfaces can be replaced cost-effectively at a later date. Table 2 below provides an overview of the available standard models. Prices must be reconfirmed with the manufacturer prior to placing an order!!