Tekan pneumatik

BERG & SCHMID PND 85/S

Kondisi: sangat baik (bekas), a genuine one-off piece, approx. 12 x 6 m Nodpfxefi Tmcs Ab Esdd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Wire diameter: 0.1 - 1.3 mm Nodpe Syv Tjfx Ab Eedd Cut length: 5 - 70 mm Output: up to 400 cycles/min Complete with cooling unit and motorized wire spool

Kondisi: baru, Tahun pembuatan: 2025, CORMAK 400 metal lathes are the new, improved version of the popular metalworking lathes. Among other enhancements, the tool post guard has been upgraded, the spindle bearing system improved, and a new digital readout has been installed. These machines are suitable for production plants, workshops, and tool rooms, making them ideal for single-unit and small batch production. NEW, IMPROVED MODEL!!! - High-quality, reinforced spindle bearing system - New guard system compliant with CE standards - Latest model digital readout for axes - Reinforced and modernized lathe base with tool drawers and a pull-out chip tray Machine features - REINFORCED, RIBBED BEDWAY PROVIDES MAXIMUM VIBRATION REDUCTION; BED IS ALSO PRECISELY GROUND AND HARDENED - 2-AXIS DIGITAL READOUT INCLUDED AS STANDARD - OPTIMAL WORK RESULTS THANKS TO LARGE 52 MM SPINDLE BORE - ADEQUATE BED WIDTH FOR STABLE AND PRECISE WORKING CONDITIONS Ndjdpfx Ajiz Tczob Ejd - MACHINE EQUIPPED WITH HIGH-QUALITY, REINFORCED SPINDLE BEARING SYSTEM - EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND THE INCLUSION OF BOTH FEED ROD AND LEADSCREW - HARDENED GEARS IN SPINDLE GEARBOX - ADJUSTABLE OVERLOAD CLUTCH ON FEED SHAFT - THREAD CUTTING ACROSS FULL RANGE WITHOUT THE NEED TO CHANGE GEARS IN THE GEARBOX - FEED SELECTION LOCK: VIA LEADSCREW OR FEED ROD - REMOVABLE BRIDGE ALLOWS MACHINING OF LARGER DIAMETER WORKPIECES - PULL-OUT CHIP TRAY AND TOOL DRAWERS FOR MORE EFFICIENT WORKFLOW Technical Data Maximum turning diameter: 400 mm Maximum turning diameter above carriage: 250 mm Maximum turning diameter in gap: 520 mm Turning length between centers: 1000 mm Bed width: 218 mm Spindle nose: CAMLOCK D5 Spindle taper: MT6 Spindle bore: 52 mm Spindle speed range: 65–1810 rpm Number of spindle speed ranges: 16 steps Longitudinal feed range: (40) 0.053–1.291 mm/rev Cross feed range: (40) 0.011–0.276 mm/rev Maximum tool size: 25 mm x 25 mm Metric threads: 0.4–7 mm Inch threads: 4–60 T.P.I. Module threads: (22) 0.4–3 mm Diametral pitch threads: (28) 8–84 D.P. Tailstock sleeve diameter: 50 mm Tailstock quill stroke: 110 mm Tailstock quill taper: MT4 Motor power: 2.2 kW Coolant pump power: 0.1 kW Weight: 640 kg Dimensions: 2000 x 820 x 1650 mm Standard Equipment - 2-axis digital readout - Fixed steady rest - Travelling steady rest - 3-jaw chuck 200 mm - 4-jaw chuck 200 mm - Face plate 280 mm - MT4 live center x2 - MT6/MT4 reducing sleeve - Set of service wrenches For more information, please visit our website.

Kondisi: baru, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Programmable for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Ndedpfogv I Unex Ab Eed Technical data UNIMAX 3T GL: Thread cutting capacity: M4 – M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Throat: 260 mm Spindle/table distance: 220 – 600 mm Table size: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Electrical connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C – 160x75x125 cm Additional accessories / options: Leadscrew, tap holder, reverse clutch, externally ventilated motor, die holder, quill flange, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet

Kondisi: baru, Tahun pembuatan: 2025, Sheet metal decoiler cantilever 500mm - Load capacity: 1,500 kg - Inner diameter: 480-530 mm - Mandrel with 4 expanding arms, ball-bearing mounted with disc brake - Maximum coil width: 500 mm Nedofvbxqepfx Ab Eodd

Kondisi: bekas, Fleischmischer Hersteller: Laska Modell: Z, 250 Liter Ndsdpfx Abelawp So Eod Mischbehälter: 250 Liter Maximale Füllmenge: 200 kg Elektrische Leistung: 5,5 kW Gewicht: 1380 kg Lieferzeit: 30 Tage nach Zahlungseingang

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Mains connection: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Ndedpsfrlndjfx Ab Eod Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Kondisi: baru, Saw blade diameter: 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160 x 90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80 x 100 mm Total power requirement: 1.8/2.5 kW Ndodpfsd Iin Tjx Ab Eed Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts to the right and left up to 45°, positive stops at 90° and at 45° left • Suitable for sawing steel, stainless steel, and, with limitations, aluminum profiles • Vise with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Hardened steel cone safety clutch to protect the saw blades • Large heavy-duty cast base plate for maximum stability and low-vibration operation • Two speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty use • Automatic blade cooling system • Double-supported saw head • 24 V safety switch integrated into the handle with restart protection • Length stop, assembly tools ATTENTION: Price is WITHOUT saw blade!!!

Kondisi: baik (bekas), Tahun pembuatan: 2005, For sale: 1 used spot welding machine incl. cooling unit Manufacturer: Tecna Model: 6125 Year of manufacture: 2005 Hyfra cooling unit VWK 50-1-S, year of manufacture 2006 Nedpeuii A Ajfx Ab Eedd Including documentation The machines can be inspected at our warehouse in 09599 Freiberg.

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), de Nedpfx Absh In Tpo Eedd