Beli Meja pengujian bekas (26)

Kondisi: bekas, Chroma Type: ATE 17020 The Chroma 17020 is a high-performance, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing - BMS verification - Validation of complex charging cycles Bsdjwwrxaopfx Abkedk High energy recovery – up to 85% efficiency Flexible expansion through multiple channels or higher current ranges Enterprise-grade use due to comprehensive safety features & data persistence Technical Data – Chroma ATE 17020 PTS Feature | Specification -----|----- Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel power: 600 W to 60 kW (modular and scalable) Total power: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher currents up to 2600 A Current and voltage accuracy: ±(0.05 % of measured value + 0.05 % of range) Power accuracy: ±0.1 % Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data recording: Cyclic, 10 μs – 1 s / buffer for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy feedback capability: Yes – up to 85% efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recovery Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Fields of application: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data, specifications may be subject to change!) If you have further questions, we are happy to answer your call.

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.400 mm, panjang total: 3.500 mm, tinggi total: 800 mm, berat keseluruhan: 7.500 kg, Surface plate from CMM disposal with adjustable leveling feet Bedpfx Aeu Uiitsbksdk

Kondisi: bekas, Meja Kerja Tahan ESD (Elektrostatis) HANDKE Industrie Technik Meja kerja dapat diatur tinggi, meja kerja Stasiun kerja individu untuk E(lectro) S(tatic) D(ischarge) Panjang meja: 1100 / 1700 mm Kedalaman meja: 600 mm Panjang meja lipat: 600 mm Tinggi kerja: dari 830 hingga 1200 mm - Permukaan meja ESD bersifat konduktif: 40 mm - Permukaan meja dengan sistem pengangkat hidrolik - Pengaturan tinggi dengan pompa hidrolik menggunakan engkol tangan - Kerangka dasar kokoh dari profil aluminium sistem - Dapat dipindahkan dengan 4 roda kecil (roda putar) - Penyangga stabil untuk monitor atau plat belakang - 1 laci Ukuran L x P x T = 675 x 210 x 40 mm - 1 laci bawah Ukuran L x P x T = 160 x 580 x 560 mm Dimensi total P x L x T: 1200 x 660 x 1560 mm Berat: 90 kg Bodpfsxf Uq Ssx Abkodk Kondisi sangat baik, seperti baru Tersedia 2 unit Harga per unit

Kondisi: baik (bekas), Pelat ukur granit 760 x 1190 x 700 mm Bedpexl Rkuofx Abkodk Ukuran: T x L x P 760 x 1190 x 700 mm Ketebalan material: 800 mm Artikel lain – baru dan bekas – tersedia di toko kami! Biaya pengiriman internasional berdasarkan permintaan!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, de-to-hu Bdodpfx Abexltu Nokjk

Kondisi: bekas, Table clamping surface: 228 x 273 mm 3 T-slots: 12 mm In between, 4 x 4 threaded holes: M8 Table height at zero position: 146 mm Required space: 250 x 290 mm Bdsdpebbgcxjfx Abkjk Weight: 41 kg

Kondisi: bekas, Chroma Tipe: ATE 17011 Ukuran: L x P x T 600 x 800 x 1760 mm Penguji Sel Regeneratif (5V/100A x 12 Kanal) Catu Daya: 400V/50 Hz 24 KVA Data Logger (64 Kanal) Bdodpfx Abewwrn Usksk Kartu Sensor 8-Port Modul 17212R-5-100 Maks 5V /100A Maksimal Kanal 12 (tetap) Dapat diparalelkan: 200A, 300A, 400A, 600A, 1200A V Dapat diatur dari 0 mV hingga 5000 mV * 1, resolusi 1mV A Dapat diatur dari 0,01 A hingga 100,00 A, resolusi 0,01 A Koneksi: 400V/50Hz, 5 kabel 24 kVA Berat: 250 kg Kondisi: bekas Ruang lingkup pengiriman: (lihat gambar) (Perubahan dan kesalahan pada data teknis, informasi dapat terjadi!) Pertanyaan lebih lanjut dapat kami jawab melalui telepon.

Kondisi: bekas, 18236-140*2, B56Hx140/1P-SC-Y 4x2 1/2"(54), Swep, brazed plate heat exchanger Bdedpfothfnvox Abkek Model: 18236-140*2 Type: B56Hx140/1P-SC-Y 4x2 1/2 Condition: Used

Kondisi: bekas, Programmable AC Power Source – Voltage Regulator Laboratory Power Supply, Bench Power Supply, Programmable AC Power Source CHROMA Model 6415 ID: 641500000 363 Year of manufacture: approx. 2000 Input specifications: Bjdpfx Ajdz Srbjbkedk Input voltage: 190 ~ 250 VAC Input frequency: 47-63 Hz Input current: max. 12 A Output specifications: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1,500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor, and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232, and analog programming interfaces - Overvoltage, undervoltage, overpower, overcurrent, overtemperature, and short-circuit protection - Temperature-controlled fan speed - Self-test at power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Dimensions (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition 2 units available, price per unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, For sale: Jenoptik T8000 Wavemove inspection table for casings This device was used, as indicated by the model, for surface inspections of casings and is in good to very good condition. Bdsdpsmfty Hjfx Abksk Year of manufacture: 2017 Weight: 2,500 kg The offer includes the components visible in the photos as well as the computer and software. Loading and/or shipping available at an additional cost. All prices plus VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Kondisi: baik (bekas), Thyssen Surface Plate / Inspection Plate made of Natural Hard Stone Length: 3000 mm Width: 1500 mm Thickness: 300 mm Flatness tolerance according to DIN 876/0 Nominal value: 16 µm Actual value: 13.3 µm ID No.: 14286 2 x T-slots with base frame 6 x Wenzel Precision Roller Stands Runout Tester with height adjustment Heavy-duty version With T-slot clamping blocks High accuracy due to play-free mounted roller bearings Roller stand height adjustable for diameter compensation List price per pair: €1,890 Additional surface plates – new and used, in various sizes – available in our shop! International shipping rates on request! Bdodpeihfm Hsfx Abkok

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Used oil test stand Manufacturer: SWEP Model: B 5x10 Dimensions (LxWxH): 115x105x115 cm Weight: 132 kg Bsdpfxsh Rnq Ts Abkodk

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar total: 700 mm, panjang total: 1.400 mm, tinggi total: 500 mm, berat keseluruhan: 2.000 kg, lebar yang dibutuhkan: 700 mm, persyaratan ruang panjang: 1.400 mm, kebutuhan tinggi: 850 mm, Attention: Only measuring plate from CMM salvage with table frame Bdedpfx Absvfn Ihokok

Kondisi: bekas, IR50, JenLas® disk IR 50, JENOPTIK disk laser Bodpjra D Drofx Abksdk Model: IR50 Type: JenLas® disk IR50 Condition: Used

Kondisi: bekas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, and insulation measurement ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Bjdef Axn Aspfx Abkedk Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The unit 90-1V supplies a highly stable DC voltage with low ripple. One output pole carries the high voltage, the other output pole is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820, and 57821.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, For sale: Jenoptik test bench, model T8000 Wavemove, suitable for housings The device is in excellent condition and ready for immediate use, including numerous additional attachments. Year of manufacture: 2000 Weight: 2,500 kg The offer includes all components shown, as well as computer and software. Loading and/or shipping available at extra cost. Bdjdpfevkxa Ejx Abksk All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you! Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: baik (bekas), en-GB Bsdsg Sxmfepfx Abkodk

Kondisi: bekas, Programmable AC Power Source / Voltage Regulator Laboratory Power Supply, Power Supply Unit, Programmable AC Power Source CHROMA Model 6415 Ref.: 64150296 Year of manufacture: approx. 2000 Input specifications: Input voltage: 190 ~ 250 V AC Input frequency: 47–63 Hz Input current: max. 12 A Output specifications: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Maximum output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45–500 Hz 1.0% for frequencies >500–1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45–1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurements: V, F, I, P, PF, CF MAIN FEATURES: Bjdpfx Abjdz Sraekodk - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor, and current crest factor - Integrated power factor correction circuit - Programmable current limitation - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for quick recall at any time - Optional GPIB, RS-232, and analog programming interfaces - Overvoltage, undervoltage, overpower, overcurrent, overtemperature, and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Supplied as shown, without any additional accessories or connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Detection of potential issues during the development phase Quality and safety checks Endurance test stand Temperature control Mobile on casters Bdedoh Rvh Sjpfx Abkek Forklift pockets 400 VAC, 3-phase, 50 amp Interrupt rating: 10,000 amp Year of manufacture: 2012 Weight: 1,400 kg Dimensions (H x W x D): 2,900 x 1,700 x 1,900 mm Additional testing equipment—new and used—can be found in our shop! International shipping rates available upon request!

Kondisi: bekas, Control panel, test station, measurement station, test device, measuring instrument, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester Bdjdpfx Aod Dc Unobkjk The device PE/IS/HV / 91-3J.3 is designed for testing dielectric strength, insulation resistance, and protective earth voltage drop measurements in accordance with VDE 0113 and IEC regulations per EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 delivers a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other output terminal is near ground and can be set to a maximum potential of 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 Watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact device assembly on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Kondisi: sangat baik (bekas), Vibration-isolated granite surface plate Surface plate made of grey-black granite Serves as a base for assembly, inspection, and laboratory applications Visible edges are ground Stainless threaded and locating holes Bdjdpfeh Ri Auex Abkek Support frame with vibration isolation (pneumatic membrane isolators) Plate dimensions: 2000 x 1450 x 400 mm (W x D x H) Weight: approx. 4000 kg Additional surface plates in various sizes—new and used—are available in our shop! International shipping rates on request!

Kondisi: baik (bekas), Aluminum measuring table with 50 mm aluminum plate and drawer cabinet Type: Measuring table with aluminum measuring plate Dimensions: 80 cm wide, 75 cm deep, and 95 cm high (226 cm high with superstructure) Aluminum plate: 5 cm thick, with threaded inserts Drawer cabinet manufacturer: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Condition: used Complete factory closure, large selection of mezzanines, pallet racking, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! Bedpfx Abshvmkijkjdk International shipping costs on request!

Kondisi: baik (bekas), Bosch starter durability testing machine The machine is an in-house production by Bosch. It is used for testing the service life and durability of engine starters (also known as starter motors). Manufacturer: Bosch Bdedpog Ith Rofx Abkjk Type: Machine for durability testing of starters Condition: Used Complete factory closure, large selection of mezzanine racks, pallet racks, shelving systems, and paternosters. High-quality industrial machinery, lathes, grinding machines, and hand tools. More items—new and used—can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard stone Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value: 48 µm Actual value: 32 µm ID no.: 14280 JFA roller blocks Additional measuring plates in various sizes—new and used—are available in our shop! International shipping costs on request! Bdodpfx Ajihilljbkok

Kondisi: baik (bekas), Thyssen surface plate / inspection plate made of natural hard stone Thyssen surface plate made of hard stone (granite plate) Length: 2750 mm Width: 700 mm Thickness: 200 mm Total height with stand: 1200 mm Height of vertical plate: 240 mm Thickness: 200 mm 2 x T-slots Flatness tolerance according to DIN 876/0 Base frame with cabinet Bdjdpfx Absihpclokjk Trimos HGL 2000 length measuring device without digital readout Additional surface plates in other sizes – new and used – can be found in our shop! International shipping costs on request!