Beli gudang rak tinggi bekas (774)

Kondisi: baik (bekas), palettenregaltraverse-td1 Hedpfx Ajxzyi Ssg Rsfr

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Dijual rak gudang tinggi untuk palet dalam kondisi baik dengan 40 tiang dan 200 balok melintang. Untuk beban berat hingga 800 kg. Usia sekitar 10 tahun. Hanya untuk pengambilan sendiri. Hfsdpoxnwynofx Ag Rer

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, bentang bebas: 19.000 mm, kapasitas angkut: 300 kg, For sale is a used Mecalux mezzanine / multi-storey racking system, consisting of racking frames with two walkable mezzanine levels, stairs, and surrounding safety rails. The system makes optimal use of the hall height and is ideally suited for carton storage, small parts storage, order picking, or light assembly work. Technical Data • Manufacturer: Mecalux • Year of manufacture: 1997 (according to nameplate) • Design: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Floors • Ground floor (rack level): • Base dimensions approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below the 1st mezzanine: approx. 3.10 m • 1st upper floor / first mezzanine level: • Gross floor area approx. 19.0 × 7.8 m ≈ 148 m² • Less stair footprint (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear usable height above: approx. 2.70 m, in areas with braces (approx. 50 cm) approx. 2.30 m • 2nd upper floor / second mezzanine level: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross floor area approx. 112 m² • Less stair footprint (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Railings • 2 × staircases, each • Width approx. 1.0 m • Run length approx. 6.0 m • Sturdy steel steps with anti-slip marking • Handrails on both sides • Surrounding guardrails at the mezzanine levels • Additional safety by chains at the access points Decking & Load Capacity • Mezzanine decking: robust wooden panels / board flooring • Floor load capacity (according to nameplate): 300 kg/m² Lighting • Areas above the mezzanine levels are equipped with lighting, so the mezzanine floors are already illuminated. Condition • Very well-maintained, little-used condition • Despite the 1997 build year, the system appears visually almost as new • Mainly just dust on the floors, no visible structural damage to frames, railings, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, available at short notice • Inspection: available by appointment Hsdpfsx Dtuaex Ag Rofr Dismantling & Transport • Dismantling by the buyer. • Assistance with dismantling and loading can be organized on request for a surcharge. • Transport to be organized by the buyer.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 991379, tinggi total: 15.000 mm, The following is offered for sale: Sheet Metal Storage System Manufacturer: STOPA Model: HRGL-00016 Year of Manufacture: 1999 Serial No.: 991379 Fully automatic Maximum sheet size: 1,250 x 2,500 mm Storage capacity: 690 tons Storage height: 15 m 230 storage locations Load capacity per compartment: 3,000 kg Control system: Siemens COROS OP25 Mesh safety enclosure Roller shutter gate High-bay warehouse equipped with 5 goods carrier towers Capacity per tower: 45 goods carriers Currently fitted with 164 goods carriers Complete price includes weighing scale Hodpfox Dazaox Ag Rjfr Collection only – dismantling and transport to be arranged by the buyer or upon agreement. If you are interested or have any questions, feel free to send me a message. Further photos and technical details available upon request. All information provided without guarantee or warranty. Subject to errors and prior sale. Price is net for export. For further questions, please call. Trade-in or exchange with value offset for your used vehicle is possible. We also accept defective, TÜV-expired, or damaged vehicles as trade-in or down payment—trucks, cars, vans, and construction machinery. Just contact us. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype We can handle all customs and registration matters for an additional charge. We also transfer vehicles to the port for an additional fee.

Kondisi: bekas, Tahun pembuatan: 2004,

Kondisi: baik (bekas), 1 Hjdpfx Agoxzqfko Rofr

Kondisi: baik (bekas), techdata-dexion-palletbeam Hodpjxzdm Iefx Ag Refr

Kondisi: baik (bekas), technical-data-pallet-rack-system-slp-en Hedpoxy Ipqsfx Ag Rjfr

Kondisi: baik (bekas), en-001 Hfjdpfsxy Hccjx Ag Rer

Kondisi: baik (bekas), palettenregaltraverse_daten_dexion Hsdpfxsxyy E Do Ag Rofr

Kondisi: baik (bekas), palettenregaltraverse-2024-06 Hjdpfsxyw Ivjx Ag Rsfr

Kondisi: baik (bekas), Data teknis untuk balok rak palet: Sistem rak: SLP Dalam paket pengiriman termasuk: 01x balok rak palet, bekas Warna material: abu-abu Profil INP: 100 x 50 mm Pengait: 3 HK (kait) Jarak bebas (clear width): 2.000 mm 02x pin pengaman, bekas Tipe: sepenuhnya galvanis Hfsdpoxyvznefx Ag Rjr Untuk mengamankan balok longitudinal terhadap pengangkatan yang tidak disengaja Kontak person di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Transportasi tambahan atau pengiriman produk ini akan dikenakan biaya tambahan yang dapat ditanyakan secara terpisah tergantung lokasi pengiriman dan cakupan pengiriman.

Kondisi: baik (bekas), Technical data for pallet racking system: Racking system: SLP Technical data for installation: Number of rack rows: 01 pcs Hfedoxyf Rfjpfx Ag Rsr Length per rack row: 15,480 mm Number of bays per rack row: 05 pcs Number of levels plus ground level: 03 pcs Scope of delivery includes: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (welded lattice structure) Height: 5,400 mm Depth: 1,100 mm 30x pallet rack beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 HK (hooks) Clear span: 3,000 mm 60x locking pins, used Material finish: Sendzimir galvanized For securing longitudinal beams against unintentional lifting 24x anchor bolts, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Version: completely galvanized For leveling rack uprights installed on uneven floors 01x load capacity sign With specifications for bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping required beyond this is subject to additional costs, which can be determined individually depending on delivery location and volume. Please contact us for details.

Kondisi: baik (bekas), Technical specifications for pallet rack system: Racking system: SLP Technical data for installation: Number of rack rows: 01 unit Length per rack row: 15,480 mm Number of bays per rack row: 05 units Number of levels plus ground level: 04 units Scope of delivery includes: 06x Pallet rack uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Including horizontal and diagonal braces, base plates The uprights are pre-assembled (welded truss design) Height: 6,870 mm Depth: 1,100 mm 40x Pallet rack beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 hook Clear span: 3,000 mm 80x Safety pins, used Material finish: Sendzimir galvanized For securing beams against accidental lifting 24x Wedge anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Leveling plates, used Design: fully galvanized For leveling rack uprights installed on uneven floors 01x Load sign With specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Hfodpfjxx Tvyex Ag Rsr Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any transport or shipping beyond that is subject to additional costs, which can be requested individually depending on the delivery location and scope.

Kondisi: baik (bekas), Data teknis untuk tiang rak palet: Sistem rak: SSI Schäfer Tipe: PR 600 Paket penawaran mencakup: 01x tiang rak palet, bekas Warna material: galvanis sendzimir Tipe tiang: P113 Dimensi profil: 100 x 100 x 2,00 mm Termasuk batang melintang dan diagonal, serta pelat alas Tiang sudah terpasang sebelumnya Hfjdpfoxxyz Nsx Ag Rsr (konstruksi rangka baut) Tinggi: 8.000 mm Kedalaman: 1.100 mm Kontak Anda di perusahaan kami: Tuan: Andre Evering Tuan: Mario Klöver Tuan: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya tersedia untuk pengambilan sendiri. Pengiriman tambahan atau pengantaran produk ini dapat dikenakan biaya tambahan, yang dapat ditanyakan terpisah tergantung lokasi dan cakupan pengiriman.

Kondisi: baik (bekas), Data teknis penyangga rak palet: Sistem rak: Dexion Tipe: S 4 Hjdexxq Tvjpfx Ag Rjfr Lingkup pengiriman meliputi: 01x penyangga rak palet, bekas Warna material: galvanis sendzimir Tipe: H Dimensi profil: 81,7 x 77,21 x 2,5 mm Termasuk batang penghubung melintang dan diagonal, plat alas kaki Penopang sudah dirakit sebelumnya (struktur rangka mur dan baut) Tinggi: 11.050 mm Kedalaman: 1.100 mm Kontak di perusahaan kami: Bapak Andre Evering Bapak Mario Klöver Bapak Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan langsung. Layanan transportasi atau pengiriman tambahan dapat dikenakan biaya ekstra, yang dapat diminta secara terpisah tergantung lokasi pengiriman atau volume pesanan.

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Shelf system: SSI Schäfer Hodpfx Agexxizrj Refr Type: PR600 Scope of delivery includes: 01x Pallet rack beam, used Material color: approx. RAL 4002 Red-Violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Connector: 5 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 3,380 kg, with evenly distributed load. 02x Safety pins, used Version: fully galvanized For securing the cross beams Note: The functionality of the beams is guaranteed despite the holes! The beams originate from an SSI project with heat protection plates that, according to manufacturer specifications, were bolted on! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This article is offered for pickup only. If transport or shipping is required beyond this, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Kondisi: baru, Tahun pembuatan: 2021, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Scope of delivery includes: 01x End frame extension, new Hfjdpfx Asdd Ev Nog Rsr Design: Universal Material color: RAL 5010 Gentian Blue Total height: 700 mm Usable height: 500 mm Telescopic range: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / unit Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly terms and conditions - Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems - Delivery with our own vehicle fleet (unloading not included) Shipping costs upon request!

Kondisi: baru, Tahun pembuatan: 2021, Your contacts in our company Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Scope of delivery includes: 01x Upright extension, new Design: Universal Color: RAL 1018 Zinc Yellow Total height: 700 mm Hfjdpfx Agsdd Ewbo Rsr Usable height: 500 mm Telescopic depth: 600 - 1,150 mm Frame profile dimensions: 45 x 45 mm angle Hole pitch: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / unit Our services at a glance: (Prices upon request) - Assembly and installation Please observe our general assembly conditions - Racking inspection Rack inspection according to DIN EN 15635, performed in accordance with BGR 234 guidelines for visual inspection of all racking systems - Delivery using our own fleet (unloading not included) Shipping costs upon request!

Kondisi: baik (bekas), Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used load distributor from the manufacturer Dexion for sale. These can also be used for other brands. The load distributors are suitable for a shelf depth of 800 mm. Scope of delivery includes: 01x load distributor, used Material finish: fully galvanized Total length: approx. 980 mm C-profile dimensions: approx. 185 x 35 mm Hodpfxjdvad Ej Ag Rjfr Opening for rack feet: approx. 115 mm Weight per unit: approx. 10.074 kg For distributing bay loads over a larger area. Overview of our services: (prices on request) Assembly and installation please observe our general assembly conditions Racking inspection Inspection according to DIN EN 15635 carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (transport only, no unloading)

Kondisi: baik (bekas), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used collision protection guardrail for purchase here. Suitable for a double rack row: 2x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Collision protection guardrail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimension: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pieces Our services at a glance: (Prices on request) Assembly, installation Please observe our general assembly conditions Rack inspection Rack inspection in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own vehicle fleet Hjdedz Uxqepfx Ag Rjfr (without unloading)

Kondisi: baik (bekas), The scope of delivery includes: 01x Bracket for push-through safety device, used Material color: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Hfedpfxsipuggs Ag Rsr Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm For rectangular tube: 50 x 30 mm Weight per piece: 0.930 kg

Kondisi: baru, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Hodpoktbnmefx Ag Refr Technical data for installation: Number of rack rows: 01 pc. Length per rack row: approx. 2,550 mm Number of bays per rack row: 01 pc. at 2,400 mm Number of levels plus floor level: 02 pcs. Scope of delivery includes: 02x pallet rack uprights, new Material color: Sendzimir galvanized Footplate color: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. horizontal and diagonal bracing, footplates Uprights are supplied unassembled (bolted truss construction) 2,350 mm high 800 mm deep Note: The rack uprights are delivered unassembled. Upon request, we can pre-assemble the rack uprights for you for an additional charge of €17.50 plus 19% VAT. 04x pallet rack beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Connector: 5 HK (hooks) Clear span: 2,400 mm Max. load per pair of beams: 1,600 kg with evenly distributed load 08x safety pins, new Design: completely galvanized For securing the beams against accidental lifting 08x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete Through-bolt installation: M12-13/95 04x leveling plates, new Design: completely galvanized For leveling rack uprights installed on uneven floors 01x load sign Indicating bay and shelf loads, manufacturer, and commission number Dimension: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply. These costs can be requested from us depending on the place of delivery and scope of delivery.

Kondisi: baru, Technical Data for Pallet Racking System: Rack System: SSI Schäfer Type: PR 600 Technical Data for Setup: Number of rack rows: 01 unit Length per rack row: approx. 2,550 mm Number of bays per rack row: 01 unit at 2,400 mm Number of levels plus ground level: 04 units Scope of delivery includes: 02x pallet rack uprights, new Material finish: Sendzimir galvanized Foot plate color: RAL 5010 Gentian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Including cross and diagonal braces, foot plates Uprights are supplied unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The rack uprights are delivered unassembled. We are happy to pre-assemble the uprights for you for an additional charge of €17.50 plus 19% VAT. 08x pallet rack beams, new Color: RAL 7035 Light Grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Connector: 5 HK (hooks) Clear span: 2,400 mm Max. load per pair of beams: 1,600 kg with evenly distributed load 04x chipboards, second choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly two-piece) 16x safety pins, new Design: completely galvanized For securing the beams against accidental lifting Hfjdpfx Agjkti Sis Ror 08x anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 04x leveling shims, new Design: fully galvanized For leveling rack uprights on uneven floors 01x load capacity signs With information on bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment can be arranged at extra cost, which can be queried with us depending on delivery location and scope.

Kondisi: baik (bekas), Technical data for pallet rack beam: Racking system: Link 51 Type: Boltless XL Scope of delivery includes: 01x Pallet rack beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Bracket: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 900 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the load beams against unintentional lifting Hfodpfxokv Urwj Ag Rjr Further information about the pallet rack beam: The 4 BST beam type is used to insert chipboard, steel panels, or similar materials, so that they finish more or less flush with the upper edge of the rack beams. This way, there is no loss of height, and the front part of the step beam also protects the boards or inserts from damage. The beams are not designed for pallet storage, but rather as order picking levels; i.e. for storing cartons, small parts, etc.