Promet AG

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G2512-01, lebar total: 1.600 mm, tinggi total: 2.150 mm, panjang total: 2.550 mm, lebar kerja: 450 mm, berat keseluruhan: 2.600 kg, daya: 46,4 kW (63,09 hp), kecepatan sabuk penggerinda: 14.000 mm/dtk, jenis arus masuk: tiga fasa, panjang sabuk penggiling: 1.900 mm, sambungan udara terkompresi: 6 batang, lebar sabuk penghalus: 470 mm, kebutuhan udara: 6 m³/jam, tegangan masuk: 400 V, tekanan kerja: 6 batang, lebar benda kerja (maks.): 450 mm, Grindingmaster mesin amplas pita lebar basah dilengkapi dengan 2 unit pengamplasan di atas dan satu unit sikat (Scotch-Brite). Mesin ini digunakan untuk pemrosesan permukaan bagian logam dengan lebar hingga 450 mm. Di bagian bawah terdapat wadah penampung debu dengan kain filter. Mesin dalam kondisi baik, sebagian telah direvisi. Informasi teknis lebih lanjut tersedia pada dokumen terkait. Fodpfeyn E H Rjx Aagofw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 28 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.970 mm, tinggi total: 2.410 mm, panjang total: 2.035 mm, lebar kerja: 1.350 mm, lebar penggilingan: 1.350 mm, berat keseluruhan: 3.600 kg, tinggi penggerindaan: 160 mm, kecepatan sabuk penggerinda: 18.000 mm/dtk, jenis arus masuk: tiga fasa, kecepatan sabuk konveyor: 333 mm/dtk, panjang sabuk penggiling: 2.620 mm, tinggi benda kerja (maks.): 160 mm, sambungan udara terkompresi: 6 batang, lebar sabuk penghalus: 1.380 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, tekanan: 6 batang, lebar benda kerja (maks.): 1.300 mm, Perlengkapan: Pelat tipe tersedia, pl-hu-01 Ffjdpfxsyl Svtj Aagow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 20 h, lebar kerja: 650 mm, Belt sanding machine from 2013. The FELDER FW 650 offers a working width of 650 mm and is equipped with a powerful 7.5 kW motor. It features variable feed speed from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with exchangeable sanding pads and a rubber contact roller. If you are looking for a high-quality sanding machine, the FELDER FW 650 we are offering for sale is definitely worth considering. Contact us for further details. • Sanding belt dimensions: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V Fedpfx Aaoyli H Aogsfw • Duty type: S1 • Variable feed speed: 3.7-16 m/min • 1 combination unit • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction port: 120 mm • Control system: conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional features • Double-sided roller table extension • Includes sanding belts: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, lebar kerja: 1.100 mm, berat keseluruhan: 2.460 kg, Mesin Bandschleifmaschine CB Levigatrici ini diproduksi pada tahun 2006. Mesin ini memiliki lebar kerja maksimum 1100 mm, beroperasi dengan 400 V / 50 Hz, dan memiliki daya total 48 kW. Dengan bobot 2460 kg, ini merupakan pilihan yang kokoh untuk pekerjaan penggerindaan Anda. Pertimbangkan kesempatan untuk membeli Bandschleifmaschine CB Levigatrici ini. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Ffodeygwuqspfx Aagjw • Head penggerindaan: 3 • Listrik: 400 V / 50 Hz • Daya total: 48 kW • Arus nominal: 94 A • Catatan: Data teknis dan deskripsi adalah salinan dari konfirmasi pesanan terkait. Data hanya untuk informasi dan tidak bersifat mengikat.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The CORMAK SG460S 400V drum metal sander is an advanced through-feed machine designed for precision grinding of metal components. Equipped with a sanding drum and a 460 mm working width, this model is ideal for serial production and for workshops that require high-quality surface finishing. It is perfect for processing small workpieces after welding and laser cutting. Key features of the machine - The 120 mm diameter sanding drum ensures uniform grinding without the risk of burns or scratches. - The belt conveyor provides smooth transport and stable guidance of the workpiece under the sanding unit. - Feed speed adjustment from 0 to 4.0 m/min allows the operating pace to be adapted to the material type. - Dust extraction system with a 100 mm port ensures efficient dust removal, increasing work comfort and component durability. - Solid industrial construction, weighing 148 kg, guarantees machine stability even during intensive use. Fedpeycfzkjfx Aagsfw Design and technology The SG460S model is engineered for stability, precision, and durability. The main frame, made of steel, ensures resistance to vibrations and deformations. The main 3.0 kW motor drives the sanding drum at 2800 rpm, enabling efficient material stock and burr removal, even from hard steel grades. The 60 W feed motor works with the adjustable speed system, allowing the operator precise control over the sanding process. The large belt width – 465 mm – enables processing of wide components in a single pass, minimizing operational time. Precision and work efficiency The machine provides accurate control of the workpiece thickness, with an adjustment range from 5 to 80 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without burning. The drum’s diameter and working length (465 mm) translate into uniform contact pressure and a consistent end result. Standard equipment - 120 mm sanding drum - 465 mm conveyor belt - 3.0 kW main motor - 60 W feed motor - 100 mm extraction port - Table height adjustment Optional equipment - Metal swarf and dust extraction unit - Sanding belts in various grits - Automatic material feed system Technical data Main motor [kW]: 3.0 Voltage [V]: 400 Sanding drum speed [rpm]: 2800 Sanding belt size [mm]: 2760 x 75 Conveyor belt size [mm]: 1120 x 450 Worktable dimensions [mm]: 460 x 465 Dust port diameter [mm]: 100 Conveyor feed speed (variable) [m/min]: 0–4 Max. workpiece height [mm]: 80 Min. workpiece height [mm]: 5 Max. workpiece width [mm]: 460 Sanding drum size [Ø x mm]: 120 x 465 Feed motor power [W]: 60 Machine dimensions [mm]: 880 x 720 x 1230 Net weight [kg]: 148

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, This SCM DMC SYSTEM wide belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with the electronic PRO SAND control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine comes with multiple working units for various sanding applications and is powered by inverters for precise speed control. Please contact us for further information about this machine. Additional Equipment • Vacuum motor: Driven by inverter up to 7.5 kW, integrated into the machine frame / Conveyor belt: Rubber-coated conveyor belt, 50 Shore hardness / Conveyor belt motor: 4 kW, inverter-driven / Console: Integrated with PC eye-M and electronic Maestro Pro Sand control, Tele Service System, 21.5" LED LCD color display • Programs: 1999 work programs / Control system: Interactive troubleshooting, self-diagnosis, Full-HD display with multi-touch screen, Maestro Pro Sand software • Operating temperature: +5 to 35°C / Additional features: Virtual keyboard, production report, display of electrical and pneumatic diagrams, user manual. Machine Advantages Technical Advantages • Working width: 1350 mm / Belt feed speed: 2 to 16 m/min / Control: PRO SAND electronic control / Display: PLC terminal with 10.4" LCD color display Ffedoyaqg Tspfx Aagow • Sanding belt dimensions: 150 x 5000 mm / Chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Unit 1: TIE 5000 working unit for extra table internal cross pad / Automatic brake, linear blower, sanding belt cleaning system / Unit 2: DO19 orbiting unit for 19 rotating disc brushes / Main motor: 1.1 kW / Rotating disc diameter: 125 mm / Units 3 & 4: BF300 working unit for brush roller / Brush roller diameter: 300 mm / Motor: 4 kW / Unit 5: SC 2620 working unit for super finishing pad / Chevron belt dimensions: 1370 x 2186 mm / Sanding belt dimensions: 1370 x 2620 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, This SCM DMC sd60 wide belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials with a thickness from 4 to 170 mm. Equipped with a 15 kW main motor, it offers feed speeds of 4.5/9 m/min. Further features include a rubber-coated calibrating roller, a sanding roller, a hard sanding pad, and electronic controls for precise operation. Take this opportunity to acquire an SCM DMC sd60 wide belt sander. Contact us for more information. Machine Advantages Technical Specifications • Working width: 1100 mm • Min./max. working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4.5 / 9 m/min • Main motor: 15 kW (20 HP) Additional Information Control Unit Electronic ammeter for the main motor to monitor power consumption Electronic display of working height Electronically controlled sanding belt Electronic height adjustment LOGIC 50 K electronic programming unit LOGIC SC electronic programming unit with LCD display, two rows of dust-protected membrane keypads, and integrated LED indicators Workpiece Handling Rubber pressure rollers Infeed anti-kickback protection Rubber feed belt Roller table with two rollers at the infeed and outfeed of the work table Pneumatic activation/deactivation of roller 1 Pneumatic activation/deactivation of roller 2 TES elastic joint sanding pad Pneumatic activation/deactivation of the sanding pad unit Units/Tooling "R" unit with roller Ffsdpfox Nr Sdjx Aagjw Combination unit "CS" with roller/sanding shoe Rubber-coated calibrating roller Sanding roller with rubber coating Hard sanding pad "RA" diagonally grooved steel contact roller in the first unit

Kondisi: baru, Tahun pembuatan: 2022, 1 Fodex H Alijpfx Aagefw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 3.551 h, lebar total: 1.790 mm, tinggi total: 2.150 mm, berat keseluruhan: 2.300 kg, panjang produk (maks.): 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt ejection system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take advantage of this opportunity to purchase the Kundig Premium-2 1350-RG wide belt sander. Contact us for more information about this machine. Additional Equipment • Steel roller • Rubber roller with device for a needle roller (unused) • Belt release system Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW Ffedpfx Aaox D E I Ejgsw • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Max. current consumption RP/RE: 36 A • Max. current consumption RE-L: 56 A • Required minimum fuse slow-blow RP/RE: 40 A • Required minimum fuse slow-blow RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Proper cable dimension cross-section RP/RE: 5x6 mm² • Proper cable dimension cross-section RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt air-blow diameter RE-L: 150 mm • Required total diameter of extraction connection RP/RE: 200 mm • Required total diameter of extraction connection RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for extraction RE-L: 5400 m³/h • Vacuum RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for blowing off belt or workpieces per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Max. workpiece width RP/RE: 1350 mm • Min. workpiece thickness RP/RE: 4 mm • Max. workpiece pass-through height RP/RE: 200 mm • Working height incl. machine base RP/RE: 910 mm • Feed speed range RP/RE: 3-15 m/min • Overall machine length RP/RE: 1690 mm • Overall machine length RE-L: 1850 mm • Overall machine width RP/RE: 1790 mm • Machine height incl. base and extraction nozzle RP/RE: 1950 mm • Max. machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still connected to power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, en Fodpfx Asx D Eyhoagjfw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, ERNST 820-2 belt sander ini diproduksi pada tahun 2002. Mesin ini dilengkapi dengan sabuk konveyor baru dan sistem penahan vakum untuk posisi benda kerja yang aman. Mesin utama menggunakan sistem dua sepatu, meningkatkan kemampuan pengamplasan. Lebar kerja 1350mm dan tinggi 120mm. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Ffsdsx D Dp Uopfx Aagew Jenis Aplikasi Pengamplasan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, Zakres dostawy • Pozycja 1: Maszyna Timesavers model 71-serie-1600-WW-RT (do wykończenia No. 4). • Pozycja 2: Maszyna Timesavers model 71-serie-1600-BB-RT (do wykończenia Scotch-Brite/SB). • Pozycja 3: Urządzenie filtracyjne • Pozycja 4: Laminator UNIVERSAL LAMINATOR UL 2931 • Pozycja 5: Zestaw części zamiennych (rolki kontaktowe, rolki dociskowe) • Dodatkowe wyposażenie: stoły i stosy palet • Rok produkcji: 2007 • Przebieg: 37 000 godzin • Maszyna w pełni sprawna. 1.2.1 POZYCJA 1: Pierwsza maszyna: 1 x TIMESAVERS, seria 71-1600-WW-RT Opis ogólny: Szlifierka z dwoma szerokimi pasami ściernymi i górnymi rolkami kontaktowymi do szlifowania oraz wykańczania taśm ze stali nierdzewnej, wykończenie No. 4. Działanie: • Miernik obciążenia wskazuje procentowe obciążenie silnika głowicy, co pozwala na pełne wykorzystanie dostępnej mocy. • Panel sterowania Mitsubishi E 1070, obejmujący: – Elektroniczny, cyfrowy odczyt prędkości posuwu w mm/min. – Elektroniczny, cyfrowy odczyt ustawienia grubości w mm. – Filtr EMC (przeciwzakłóceniowy na wahania napięcia). Głowica 1 do wykończenia No. 4: • Rolka kontaktowa: średnica 280 mm, specjalna, wulkanizowana, olejo- i odporna na wysoką temperaturę guma (55 Shore), ze specjalnym profilowanym rowkiem. • Wzmocniona głowica szlifierska. • Precyzyjna regulacja wysokości głowicy z dokładnością do 0,01 mm (zmiana docisku lub przystosowanie do grubości taśmy ściernej). • Przesunięcie odczytywane na wskaźniku czujnikowym. • Wspornik boczny: szybkozłącze M20 do sprawnej wymiany pasa i sztywnego mocowania głowicy. • Napinanie pasa ściernego: pneumatyczne, załączane przyciskiem. Automatyczne kompensowanie wydłużenia pasa. • Maszyna nie wystartuje jeśli pas nie jest napięty. • Prowadzenie pasa ściernego: układ elektroniczny automatycznie utrzymuje pas na głowicy. • Trymer pasa: dźwignia do korygowania ewentualnego zsuwania pasa. • Wyłącznik krańcowy śledzenia automatycznie zatrzymujący głowicę w razie awarii prowadzenia pasa. • Silnik główny z przetwornicą częstotliwości 45 kW, zakres prędkości 8–22 m/sek dla różnych typów wykończenia. Głowica 2 do wykończenia No. 4: (Specyfikacja identyczna jak głowicy 1: rolka kontaktowa 280 mm, silnik 45 kW, itd.) Dane techniczne (Poz. 1): • Maks. szerokość robocza: 1600 mm Ffedpfsxvbxdsx Aagew • Wymiary pasa ściernego: 1600 x 2620 mm • Wysokość otworu roboczego: 0,5–50 mm • Prędkość posuwu (regulowana częstotliwościowo): 0–30 m/min • Silniki główne (1 i 2 głowica): po 45 kW • Całkowita moc zainstalowana: ok. 100 kW • Masa maszyny: 9 000 kg _____ POZYCJA 2: Druga maszyna: TIMESAVERS, seria 71-1600-BB-RT Opis ogólny: Maszyna do szczotkowania z dwoma jednostkami szczotkującymi, do wykończenia SB Scotch-Brite. Parametry głowic szczotkujących (1 i 2 głowica): • Szczotka Scotch-Brite o średnicy 400 mm • Napędzana regulacja wysokości • Oscylacja: regulowana w zakresie 200–700 oscylacji/min • Silnik główny 22 kW/głowica, sterowany częstotliwościowo Dane techniczne (Poz. 2): • Maks. szerokość robocza: 1600 mm • Średnica zewnętrzna szczotki: 400 mm • Wysokość otworu roboczego: 0,5–80 mm • Silnik oscylacji szczotki: 3 kW • Masa maszyny: 12 000 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.500 kg, sambungan udara terkompresi: 6 batang, panjang meja: 1.600 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, lebar benda kerja (maks.): 4.000 mm, panjang benda kerja (maks.): 1.500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing of stainless steel sheet surfaces Wide belt grinding machine with two top-mounted wide belt sanding units and one brush unit Dry processing machine with Wandres production cleaning brush The roller table shown in the gallery image is NOT included with the aforementioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Ffedpfx Aeq Tp H Hjagsw Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Setting accuracy: 0.01 mm Flat feed carpet Feed speed: 4-20 m/min Electricity: Main motor 1st unit frequency-controlled 22 kW Main motor 2nd unit frequency-controlled 22 kW Main motor 3rd unit frequency-controlled 15 kW Feed motor 3 kW Electrical connection 400 V Frequency 50 Hz Compressed air: Required air pressure: 6 bar Air requirement per unit: 30 l/min Wandres air requirement: 235 l/min Dust extraction PER unit: Required airflow at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Upon request, extraction systems and/or installation services can also be offered. The roller table shown in the gallery image is NOT included with the aforementioned machine!

Kondisi: baru, Tahun pembuatan: 2025, DM1100 Z - NEW DESIGN - for €29,800 Deburring up to 1100 mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide belt station, which can be used for deburring parts from 50×50 mm in size up to a width of 1100 mm. The DM1100 Z is also suitable for surface finishing, and can be operated both with standard abrasive belts and with non-woven/Scotch-Brite belts. With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge rounding machine. We also offer a part return system for this machine. Fjdsimdmtspfx Aagsfw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Machine comes with the equipment shown in the picture. Ffedpfx Aefa S E Ioagow