Beli Mesin frais - universal konvensional, langkah sumbu X 400–499 mm bekas (64)

Kondisi: bekas, Tahun pembuatan: 2005, 1 Fpjdpfxeyrhr Dj Aagjd

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Fedpfewyit Hox Aagjpd Spindel frais horisontal dan vertikal Pinol Data teknis: Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Kondisi: bekas, Tahun pembuatan: 2017, fräszmasch-001 Fpodpjym Rr Asfx Aagod

Kondisi: baik (bekas), Tahun pembuatan: 2015, Nomor Artikel Internal: 26008 Mesin Milling Universal Wagner FTA 400 Tahun Pembuatan: 2015 Jarak gerak: X 400 / Y 200 / Z 380 mm Taper spindle: SK40 Kecepatan putar: 50 – 2000 rpm Ukuran meja: 750 x 320 mm Fedpfjymwpbjx Aagopd Berat benda kerja maks.: 285 kg Daya utama: 2,2 / 3,0 kW Feeder: 50 – 450 rpm (tanpa langkah) Quill bor: 90 mm + Ragum mesin hidrolik + Kabin pelindung (sesuai UVV) + Pompa coolant + Manual pengoperasian Dimensi (PxLxT): 170 x 170 x 190 cm Berat: 1300 kg Mesin berasal dari institusi pendidikan dan dalam kondisi terawat. Silakan kunjungi dan uji mesin dalam keadaan terhubung listrik di area gudang berpemanas seluas lebih dari 500 m².

Kondisi: diremaj di bengkel (bekas), Mesin Frais Universal untuk Alat Fedpfxsx A T Eve Aagspd Merek: harich (DECKEL) Model: B (FP 2) Aktiv direkondisi dengan CE toleransi geometri disertai protokol pengujian dengan garansi Aksesori: - Display digital 3-sumbu Heidenhain Positip 8016 - Meja tetap atau meja universal - Kepala frais vertikal SK 40 - Pelumasan sentral, dioperasikan manual - Perangkat pendingin - Buku manual pengoperasian Perlengkapan CE dan Keamanan: - Kelistrikan mesin baru dengan panel kontrol - Penutup kepala frais vertikal dengan pengawasan elektronik - Pelindung chuck dengan pengamanan elektrik - Motor penggerak dengan fungsi rem - Panel pengoperasian dengan tombol Emergency Stop, Release, Start, dan Stop, Potensiometer untuk pengaturan feeding - Dokumentasi baru untuk mesin dan panel kontrol - Pernyataan Kesesuaian CE

Kondisi: sangat baik (bekas), x-Weg 450 mm y-Weg 175 mm z-Weg 400 mm Spindeldrehzahlen 60 - 2800 U/min Fjdpfx Aaovwgn Degspd Werkzeugaufnahme ISO SK-30 Maschinengewicht ca. 1 t Raumbedarf ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Kondisi: siap digunakan (bekas), Mesin Frais Alat DECKEL FP 2E dari lembaga pendidikan - Perjalanan sumbu X / Y / Z 400x200x400 mm - Feed otomatis + rapid traverse pada sumbu X/Z Fedeypltaepfx Aagopd - Rentang putaran 40 - 2000 rpm - Dudukan alat ISO 40 - Perlengkapan frais vertikal/horizontal - Kepala vertikal dapat diputar dengan pin boring - Mesin dengan kepala geser / sumbu Y dapat diperluas - Lemari kontrol baru - Sistem pendingin cairan - Bak serpihan - Dokumentasi Dimensi: PxLxT 1,5x1,6x1,8 meter / Berat 1500 kg Kesalahan dan kekeliruan pengetikan dapat terjadi.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, For sale is a milling machine of the brand Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Fedpfevftrxjx Aagepd Technical data: • Control system: Heidenhain TNC 124 • Year of manufacture: 1996 • Working area, longitudinal X-axis: 400 mm • Transverse Y-axis: 350 mm • Vertical Z-axis: 400 mm • Fixed angle table, clamping surface: 650 x 350 mm • Maximum table load: 250 kg • Main drive AC motor: 5.5 kW • Feed drives: AC individual drives • Infinitely variable feed: 0 - 2,000 mm/min • Tool holder: SK 40 • Spindle speed range: 1–4,000 rpm • Quill, vertical travel: 60 mm • Swivel range, vertical milling head: ±90° • Tool clamping: hydraulic • Linear direct distance-coded measuring systems, resolution 0.001 mm • Positioning deviation Pmax according to VDI/DGQ 3441: 0.015 mm • Operating voltage: 400 Volt, 50 Hz • Total connected load: approx. 12 kVA • Weight: approx. 1,750 kg On request, transport and loading can be organized Europe-wide at extra charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, tinggi total: 16.000 mm, lebar total: 1.100 mm, panjang total: 1.500 mm, Empty weight: 1,000 kg Milling Machine, Universal Milling Machine, Milling Bench Fpsdox S Eayepfx Aagjd Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400x270x400 mm Speed: 40–2,000 rpm Table: 700x330 mm Spindle taper: ISO 40 Spindle motor power: 2.2 kW Overall dimensions: 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Manual/conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Transport dimensions: 1,500 mm x 1,100 mm x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial Information VAT: The indicated price is net, plus VAT VAT/differential taxation: VAT recoverable for businesses Delivery and trade-in possible at any time for all items in the industrial sector Lukas van Rossum

Kondisi: bekas, Tahun pembuatan: 1981, en-001 Fsdju Nc Hkspfx Aagjpd

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm Fpedpfx Aajd Hl Stogsd

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 420 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 380 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 65 rpm, gores kuas bulu: 100 mm, tinggi total: 1.800 mm, lebar total: 1.500 mm, panjang total: 1.200 mm, lebar meja: 390 mm, panjang meja: 840 mm, berat benda kerja (maks.): 200 kg, jarak meja ke pusat spindel: 470 mm, Perlengkapan: dokumentasi / manual, Table surface (swivel table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Quill stroke Z1: 100 mm Spindle speed range: 65 - 2600 rpm Fjdpfx Aeu Nytzsagopd Number of gear steps: 12 Drive power: 2.2 kW Tool taper: SK 40 (DIN 2080) Weight approx.: 1200 kg Including extensive standard accessories, among others: Work area enclosure with front doors 3-axis digital readout Pneumatic tool clamping system for vertical spindle with SK-40 (DIN 2080) Double-monitored spindle guard 3 conventional handwheels Complete electrical equipment for three-phase current 400 V, 50 Hz Ball screw drives for X, Y, and Z axes Vertical milling head Fixed angle table with 9840 x 390 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pcs.) of mounting elements

Kondisi: baru, de-to-en Fpsdpfxextu D Is Aagsd

Kondisi: bekas, Tahun pembuatan: 1995, - Heidenhain digital readout - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic clamping system - Rigid angle table - Electric central lubrication - Coolant unit - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Number of T-slots: 5 - T-slot width: 14 H7 - T-slot spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle centre: 140 - 540 mm - Table top to vertical head bottom edge max.: 430 mm Milling spindle: - Tool holder: SK40 - Spindle speeds vertical/horizontal: 40 - 2550 rpm - Number of gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: Fpedpovhfqrofx Aagsd - Longitudinal & cross feed: 0 - 1000 mm/min - Rapid traverse, longitudinal & cross: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Kondisi: baik (bekas), Tahun pembuatan: 1986, Universal milling machine Manufacturer: KUNZMANN Model: UF 6 / 3 Year: 1986 with Heidenhain digital readout Fpsdpjich Dvsfx Aagod Spindle taper: ISO 40 horizontal and vertical Spindle speeds: 50 - 2150 rpm Feed rates, infinitely variable: 0-1000 mm/min on X / Y axes and 0-250 mm/min on Z axis Rapid traverse: 2000 mm/min on X / Y axes, 500 mm/min on Z axis Table size: 860 mm x 265 mm, tiltable ± 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine documentation available. In good condition. Ready for demonstration.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Travel (X/Y/Z): 400 / 320 / 400 mm Control: HEIDENHAIN TNC 410 Spindle speeds – stepless: 0 – 4,000 rpm Quill stroke: 60 mm Tool holder: SK 40 Clamping surface of table: 650 x 350 mm Total power requirement: 6.5 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.5 x 1.8 x 2.0 m Electronic handwheel: HR 410 Fpsdpfx Aaount Ihsgsd Touch probe: MP 11, automatic tool measurement: TT 120 Enclosure, tool holders, ...

Kondisi: bekas, Tahun pembuatan: 1972, Milling machine used Make: Kunzmann Model: UF6N Fpjdpfx Aeudb N Doagjd Year of manufacture: 1972 Technical specifications: Automatic longitudinal table travel: 440 mm Manual longitudinal table travel: 450 mm Cross table travel: 200 mm Vertical table travel horizontal/vertical: 465/500 mm Table size: 860x240 mm Table tiltable on both sides: 45° Distance table/spindle: 430 mm Spindle taper: ISA 30 Quill stroke: 60 mm Spindle head swiveling +/- 90° 18 spindle speeds horizontal: 32-1342 rpm 18 spindle speeds vertical: 72-2888 rpm 6 automatic longitudinal feeds: 13.12-164 mm/min 6 automatic cross feeds: 26.24-328 mm/min Spindle drive: 1.8/2.6 kW with tiltable vertical milling head, clamp, tailstock, collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Kondisi: bekas, Tahun pembuatan: 2007, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 350 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 400 mm, jarak gerak quill: 60 mm, beban meja: 250 kg, Perlengkapan: dokumentasi / manual, Mesin Frais & Bor Universal Bekas Kunzmann WF 4/3 Kontrol jalur Heidenhain TNC 124 Gerakan X/Y/Z = 400/350/400 mm Kecepatan putar 1–4000 rpm, tanpa langkah Spindel SK40 DIN 69871 (Tipe AD) dengan baut pengikat DIN 69872 Spindel horizontal dan vertikal Meja sudut tetap 650x350 mm dengan 6 slot T 14 H7 Sistem pendingin Handwheel elektrik HEIDENHAIN HR 410 Sistem probe HEIDENHAIN KW130 dengan kabel Kabinet pelindung cip, penjepitan alat hidrolik, pelumasan sentral. Manual mesin serta buku petunjuk pengoperasian dan kontrol tersedia. Data teknis tambahan tersedia atas permintaan. Mesin berada di lokasi kami di 71334 Waiblingen-Beinstein, siap digunakan dan dapat dilihat kapan saja. Mohon konfirmasi sebelumnya. Fpedpfx Aajya Hrlsgod

Kondisi: bekas, tinggi total: 1.850 mm, lebar total: 1.200 mm, panjang total: 1.300 mm, en-GB-001 Fpjdox Hiibspfx Aagod

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Fpjdshikrrspfx Aagsd Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen -

Kondisi: baik (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 350 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 100 mm, Mesin Frais Universal V/H Produsen: Emco Tipe: FB-4 Tahun Pembuatan: 2004 Kontrol: Indikator Heidenhain ND-760 Parameter teknis: ----- • Lintasan X-Y-Z: 450 x 300 x 350 mm • Bidang penjepitan: 800 x 400 mm • Dudukan alat: SK-40 • Stroke pinol: 100 mm • Kepala frais dapat diputar ± 90° • Spindel: 50 – 2.500 rpm • Pilihan kecepatan: 18 tingkat • Pelumasan sentral elektrik • Lampu mesin • Sistem pendingin cair • Kabin pelindung cipratan (dapat dilipat) • Berat: 1.550 kg • Dimensi PxLxT dalam mm: 1.485 x 1.500 x 1.700 mm Aksesori: ----- Fpsdjx Tzk Rjpfx Aagjd • 4x kaki penyangga mesin • Manual pengoperasian • Kunci pengikat • Bantalan pendukung untuk pekerjaan horisontal • Set poros untuk pekerjaan horisontal • Penutup meja (saat ini dilepas) Tersedia dua mesin identik, keduanya diservis dan sebagian direkondisi pada Q4-2025.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 410M Tool Milling Machine with Heidenhain TNC 128 Control – LIKE NEW CONDITION, CE-Compliant!! Technical Data: >> Year of manufacture: 2022 Machine No.: 411555 >> Clamping surface of milling table: 650 x 375 mm Number of T-slots: 5 T-slot width: 14 H7 T-slot spacing: 63 mm Maximum load: 250 kg >> Spindle speed range: 1-4500 rpm >> Feed rate (X, Y, Z axes): stepless, up to max. 5/5/4 m/min >> Travels (X/Y/Z): 410/350/450 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight: approx. 2000 kg >> Dimensions (approx.): 2 x 2 x 2 m >> Connected load: 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Electronic handwheel Heidenhain HR 510FS >> Hydraulic clamping for vertical and horizontal operation Fpodpfx Aasv Rppksgjd >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Machine lamp >> Minimum quantity lubrication system >> Steady rest >> Digital readout for quill travel >> Oriented spindle stop (thread cutting without compensating chuck) >> Chip protection enclosure >> Edge finder KT 130 >> Coolant system >> 200 mm rotary table >> Indexing device with 125 mm 3-jaw and 4-jaw chuck >> 125 mm hydraulic machine vice About the machine: For sale is a Kunzmann WF 410M tool milling machine, year 2022, in like-new condition, equipped with a Heidenhain TNC 128 control. The TNC 128 offers a wide range of dialog-guided cycles with graphical simulation for quick and easy data entry, e.g.: various drilling cycles, thread cutting, hole patterns, linear hole arrays, rectangular pockets, rectangular tenons, and surface step-over operations. This is a very user-friendly control system. In addition, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple, thanks to the pivoting vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital readout in special light grey paint finish!!! Technical Specifications: >> Year of manufacture: 1987 Machine No.: 2203-2772 >> Fixed angle table >> Spindle speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min Fodpfx Aovg Ewceagspd >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm >> Vertical quill and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine in very good condition. The machine has minimal backlash, and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 CNC Control – Excellent Condition, CE Compliant! Technical Data: • Year of manufacture: 2006, Machine No. 348013 • Rigid angle table • Infinitely variable spindle speed up to 4,500 rpm • Stepless feed on 3 axes from 0 to 2,000 mm/min • Rapid traverse on X and Y axes: 5,000 mm/min Fpedewrhxfjpfx Aagsd • Z axis rapid traverse: 4,000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quills – SK40 taper • Hydraulic drawbar system • Weight: approx. 1,800 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 15 KVA Equipment and Accessories: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control operation manual and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition. It comes from a facility where it was primarily used sparingly for training purposes only. The CNC control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann in operation at our site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 Contouring Control – Excellent Condition, CE-Compliant!! Technical Specifications: >> Year of manufacture: 2004 | Machine No.: 370506 Fjdpfx Ajwpkcheagjpd >> Clamping surface of milling table: 800 x 425 mm - T-slots: 6 - T-slot width: 14 H7 - Slot pitch: 63 mm - Maximum table load: 300 kg >> Spindle speeds up to 4,500 rpm >> Feed rate up to 2,000 mm/min - Rapid traverse up to 5,000 mm/min >> Travel (X/Y/Z): 600/400/400 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Approximate weight: 2,000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and Equipment: >> Heidenhain TNC 310 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication system >> Spindle brake >> Electronic hand wheel >> Heidenhain probe >> Technical documentation, spare parts diagrams, operating manual >> Fully enclosed safety cabin >> Coolant system About the machine: Offered is a Kunzmann WF7/3 universal milling machine equipped with Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very user-friendly. The machine also features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Kunzmann under power at our facility.