Yizumi Precision Machinery (Germany) GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: Kdedpfeyv E Nvsx Ag Rsi - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 91.708 h, gaya penjepit: 8.000 kN, diameter sekrup: 135 mm, volume langkah: 8.870 cm³, panjang total: 11.810 mm, lebar total: 3.200 mm, tinggi total: 2.900 mm, 1 Kodpfx Ajyv E Hbsg Redi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin injection Krauss Maffei KM 160–1000 CX 🔹 Informasi utama Produsen: Krauss Maffei Model: KM 160–1000 CX Tahun produksi: 2012 Jam kerja: 57.654 jam Kategori: Mesin injection hidrolik 🔧 Unit penutup Gaya penekanan: 1.600 kN (160 ton) Ukuran pelat: 820 × 845 mm Jarak antar kolom: 520 × 520 mm Tinggi minimum cetakan: 300 mm Maks. langkah pembukaan: 950 mm 💉 Unit injeksi Diameter screw: 50 mm Volume injeksi: 432 cm³ Berat injeksi: 393 g Tekanan injeksi: 2.304 bar ⚡ Sistem elektro-hidrolik Daya motor pompa: 37 kW Daya elemen pemanas: 18,7 kW 👉 Dapat dipasang sistem penghemat energi (ESS) – penghematan energi nyata hingga 30–60% 📐 Dimensi & berat Berat mesin: 9 ton Kodpeyv E E Djfx Ag Rodi Dimensi (P × L × T): 5,54 × 2,06 × 2,18 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 59.000 h, gaya penjepit: 4.200 kN, diameter sekrup: 60 mm, volume langkah: 769 cm³, tekanan injeksi: 2.200 batang, panjang total: 6.830 mm, lebar total: 2.330 mm, tinggi total: 2.480 mm, berat keseluruhan: 23.090 kg, Gaya penutupan: 4200 kN Dimensi tiang h x v: 800 x 800 mm Ukuran pelat h x v: 1270 x 1200 mm Tinggi pemasangan min.: 580 mm Jarak pelat maks.: 1300 mm Jalan buka: 720 mm Diameter screw: 60 mm Volume langkah: 769 ccm Tekanan injeksi: 2200 bar Perlengkapan Teks layar dalam bahasa Jerman Tarikan inti hidraulik 4x Mesin tanpa sistem penanganan Mesin tanpa corong material Elemen perata Pemanas cetakan 12x Dimensi mesin PxLxT: 6,83 m x 2,33 m x 2,48 m Berat total: 23090 kg Kjdpfxoyv E Dao Ag Rjdi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, jam operasional: 26.033 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.000 kN, diameter sekrup: 75 mm, volume langkah: 1.657 cm³, tekanan injeksi: 2.022 batang, panjang total: 7.200 mm, lebar total: 1.750 mm, tinggi total: 2.420 mm, berat keseluruhan: 16.400 kg, translation-01 Kjdpeyv Ez Esfx Ag Redi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 69.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, volume langkah: 1.039 cm³, tekanan injeksi: 1.441 batang, panjang total: 7.980 mm, lebar total: 2.200 mm, tinggi total: 2.570 mm, berat keseluruhan: 30.750 kg, Gaya penutupan: 3500 kN Ukuran pelat h x v: 1050 x 980 mm Tinggi pemasangan min.: 350 mm Jarak pelat maks.: 1300 mm Jarak pembukaan: 950 mm Kodpsyv Embsfx Ag Rsdi Diameter sekrup: 70 mm Volume langkah: 1039 ccm Tekanan injeksi: 1441 bar Perlengkapan Teks layar dalam bahasa Jerman Penarik inti hidrolik 2x Mesin termasuk konveyor dengan sistem penanganan Mesin termasuk pelindung keselamatan Mesin tanpa hopper material Elemen perata Data Sistem Penanganan Merek: ENGEL Kontrol: ER-HLI 81 Tahun pembuatan: 2004 Dimensi mesin PxLxT: 7,98 m x 2,22 m x 2,57 m Berat total: 30.750 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Kdodpfjyv Elwsx Ag Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 8.250 h, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, panjang total: 4.110 mm, lebar total: 2.650 mm, tinggi total: 4.810 mm, berat keseluruhan: 22.000 kg, tech-de-param-01 Kedpfx Aoyv D T Tsg Redi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 9.585 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, volume langkah: 523 cm³, tekanan injeksi: 1.904 batang, panjang total: 6.700 mm, lebar total: 1.600 mm, tinggi total: 2.300 mm, berat keseluruhan: 10.900 kg, translate_01 Kdjdpfxeyv D Hgs Ag Rei

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 10.113 h, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, jarak antara tiang: 470 mm, volume langkah: 156 cm³, tekanan injeksi: 2.429 batang, panjang total: 6.000 mm, lebar total: 1.700 mm, tinggi total: 2.190 mm, tech-de-2024-injection-specs Ksdpfx Ageyv Dvbo Rsdi

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 43.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 45 mm, jarak antara tiang: 630 mm, volume langkah: 318 cm³, tekanan injeksi: 2.470 batang, 503604 Kodsyvzyqepfx Ag Redi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 38.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 392 cm³, tekanan injeksi: 2 batang, gaya ejektor: 225 N, lintasan ejektor: 90 mm, panjang pelat: 900 mm, lebar pelat: 900 mm, panjang total: 6.400 mm, lebar total: 1.950 mm, tinggi total: 2.210 mm, berat keseluruhan: 12.140 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 400 V, bentang bebas: 900 mm, Perlengkapan: dokumentasi / manual, 503409 Kdjdpeyvzykofx Ag Rsi

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 107.027 h, Fungsionalitas: berfungsi sepenuhnya, 23375956 Ksdoyvt Ugepfx Ag Redi

Kondisi: bekas, Tahun pembuatan: 2013, gaya penjepit: 2.400 kN, diameter sekrup: 55 mm, volume langkah: 653 cm³, tekanan injeksi: 2.041 batang, gaya ejektor: 59 N, Gaya penutupan: 240 t Tahun produksi: 2013 Unit injeksi .../1330 Diameter sekrup: 55 mm Tekanan injeksi spesifik: 2041 bar Volume injeksi: 653 ccm Rasio L/D sekrup: 22 Sistem penutupan cetakan 240/... Gaya penutupan: 240 t Ukuran plat cetakan: 910 x 930 mm Jarak antar kolom: 630 x 570 mm Gaya ejektor: 59 kN Tinggi cetakan: 350 mm Jarak buka: 725 mm Jarak maksimum plat: 1075 mm Langkah ejektor: 200 mm Berat: 10.000 kg Dimensi (p x l x t): 5,5 x 1,8 x 2,4 m Tahun produksi: 2013 Kontrol: Unilog B6 Kdsdpfx Agsyvtu Hs Rsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cm³ Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, controlled by proportional valve x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on the vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in system for pressure quality control by Kistler – measurement of mould pressure Original Weber rotary table: very precise, driven electrically by a servomotor controlled by an inverter Rotary table diameter: 1200 mm Purchase of rotary table at extra cost Robot: Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servomotors: X, Y, Z (telescopic) Axis travel (approx.): X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Purchase of robot at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Kdjdpfx Agsyvrl Rs Rei Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2000 bar Dosage Volume: 664 cm³ Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1510 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with Air Valve 3x Hydraulic Core Pull 13x Hot Runner Control Circuits Injection Unit Hardened - Bimetallic Main Drive Motor - Servomotor with inverter control Highly precise rotary table, servo-driven, controlled via inverter Rotary Table Diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus Sensor - Mold Pressure Regulation Conversion of the injection unit to vertical operation possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91 x 2.12 x 4.62 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests for the selected machine is available on request, or you can participate in live technical demonstrations at our facility in Łódź. Kdodpfjyvrlqjx Ag Rei Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional Equipment: Kdedpeyvrlkefx Ag Roi Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – the machine is equipped with a system for setting the minimum mold height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes electrically driven by servomotors; C axis – pneumatic Stroke lengths (axes): X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch controller Robot with adapter, conveyor belt, and safety guard Robot and conveyor belt available for purchase at additional cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine, or participate in live technical tests at our facility in Łódź. Price: on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating Hours: 20,499 h in Automatic Mode Year of Manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosing volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pulls, controlled via proportional valve x 4 Hot runner control Hardened injection unit – bimetallic Proportional valve on the injection unit – precise dosing Machine equipped with two cylinders / battery with compressed nitrogen (additional charge for rapid operation) Kdjdsyvrk Tjpfx Ag Roi Machine designed for use with an electric rotary table. Features an inverter for servo motor control on the rotary table and the interface for table connection Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in side injection unit: ⌀25 mm – 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servomotors (electric); C-axis and A-movement Travel paths (axes): X-550, Y-1,400 (telescopic), Z-3,500 Touch control panel Safety package for the robot Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at an additional cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service engineers prior to sale. A video of the technical trials of the selected machine is available on request, or you can participate in live technical demonstrations at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Arburg 570C 2000-350/150 / Production Line with Side Robot Arburg Multilift / 2C Machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2-component machine (2K) Air valve x 1 Hydraulic core pull x 5 Controller with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for high-precision molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS Kdedpfxoyvrk Ho Ag Rei All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in a live technical demonstration at our facility in Łódź. Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Kedsyvrktspfx Ag Redi Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle lever Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving The injection unit is powered by a servo motor controlled by an inverter Machine with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Robot Arburg Multilift Select 6kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven by servo motors (electric); C axis - pneumatic Travel distances on axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2,500 bar Dosage volume: 154 ccm Clamping Unit: Clamping force: 160 t Tie-bar distance: 520x520 mm Dimensions of the mounting plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection unit – bimetal Machine equipped with two cylinders / batteries with compressed nitrogen (extra charge for fast operation) The machine features a servo motor integrated in the injection unit for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated conveyor belt by Arburg and sorting chute Original Weber rotary table, highly precise – electrically driven (inverter integrated into the machine) Purchase of the rotary table and robot at extra cost Dimensions: Weight: 8,140 kg Length/Width/Height: 4.81x1.84x3.45 m All machines offered are started and tested by our service technicians prior to sale. Kdsdpfxeyvri Ne Ag Rji It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, needle type, controlled by proportional valve x 2 Reinforced injection unit – bimetallic Proportional valves on injection units – precise injection Machine equipped with two cylinders / compressed nitrogen accumulators (additional charge for high-speed operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Original rotary table Rotary table can be purchased at additional cost Wittmann W823 Robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); Axis C and movement A Travel paths in axes: X-550, Y-1400 (telescopic), Z-3500 Touchscreen control panel Robot safety package Robot with adapter and safety guarding Purchase of the robot at additional cost Dimensions: Weight: 6,720 kg Kjdpfxjyvrivj Ag Rjdi Length/Width/Height: 4.41x1.84x3.20 m All offered machines are started and tested by our service engineers prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical testing at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Kdodjyvripspfx Ag Rsi Clamping force: 150 t Tie-bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control System: SELOGICA - touchscreen Additional Equipment: Hybrid machine: energy-saving and extremely quiet Euromap 67 Robot interface Core pull control Hot runner control x 8 zones Injection unit hardened - bimetallic Main motor - servo motor with inverter drive – energy-saving Injection unit driven by servo motor controlled via inverter Machine equipped with cylinder / battery with compressed nitrogen (extra charge for fast operation) Central lubrication Parallel movements Priamus sensor – mold pressure control Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power consumption: 27.9 kW All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 520H 1500-400 e² / Hybrid Injection Moulding Machine Year of Manufacture: 2011 Injection Unit: Screw Diameter: 40 mm Shot Weight: 184 g Injection Pressure: 2000 bar Dosage Volume: 201 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy saving and very quiet Euromap 67 Robot interface 4x air valves on the fixed platen side 3x air valves on the moving platen side 1x hydraulic core pull on the fixed platen side Injection unit hardened - bimetal Main motor: servo motor driven by frequency inverter - energy saving Injection unit driven by servo motor, controlled by frequency inverter Machine equipped with cylinder / accumulator with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic mould height adjustment Dimensions: Kjdpfxeyvriij Ag Redi Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Arburg 470C 1500-400 Year of manufacture: 07/2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be exchanged Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service technicians prior to sale. Kdjdpfxsyvrice Ag Rji It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request