Domaplast Kft.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, gaya penjepit: 2.300 kN, Perlengkapan: dokumentasi / manual, Toshiba EC230SXII – 230 t Injection Unit i8 – 50 mm Screw Clamping Unit Clamping Force: 2,250 kN (230 t) Tie Bar Distance (H×V): 610 × 560 mm Platen Size (H×V): 880 × 830 mm Movable Platen Stroke: 550 mm Max Daylight: 1,230 mm Mould Height min-max: 250–680 mm Ejector Force: 49 kN (5.0 t) Ejector Stroke: 130 mm Injection Unit – 50 mm Screw Diameter: 50 mm Shot Volume: 392 cm³ Shot Weight (PS): 361 g Shot Weight (PE): 286 g Max Injection Pressure: 200 MPa Max Hold Pressure: 200 MPa INJECTION SPEED / RATE STD Speed: 250 mm/s STD Rate: 490 cm³/s HIGH DUTY Speed: 160 mm/s Csdoyhpi Ajpfx Abhogn HIGH DUTY Rate: 314 cm³/s HIGH SPEED Speed: 350 mm/s HIGH SPEED Rate: 687 cm³/s Plasticizing Plasticizing Capacity (PS): 160 kg/h Screw Speed: 255 rpm Screw Torque: 1,421 Nm Nozzle Contact Force: 29.4 kN (3.0 t) ELECTRICAL Main Switch STD: 125 A Main Switch HIGH DUTY: 125 A Main Switch HIGH SPEED: 175 A Transformer: 75 kVA Heating Capacity: 15.2–16 kW Dimensions &

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2004, Betriebsdruck (bar): 210 Spritzkraft (kN): 450 Schliesskraft (kN): 2400 Öffnungsweg (mm): 0-510 Werkzeugeinbauhöhe (mm): 460-800 Csdpfxoyhn Tgs Abhogn Zustand: Defekt-Ersatzteilträger (Platine entfernt, Hydraulikventil entfernt)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 48.925 h, Schliesskraft: 4800 kN Csdpfxjyhn Drj Abhsgn Schneckendurchmesser: 60 mm Antrieb: Hybrid – energieeffizient, hohe Einspritzleistung Einsatzbereich: Dünnwandbehälter aus PP/PS – Food & Non-Food

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 132.186 h, Absolut penghitung siklus C120 = 062077965 Tekanan kerja (bar): 210 Gaya injeksi (kN): 450 Gaya penjepit (kN): 3000 Jarak bukaan (mm): 0-700 Tinggi pemasangan alat (mm): 400-750 Tegangan nominal (V/Hz): 400 / 50 Arus nominal (A): 99,5 Daya nominal (kW): 55 -Dengan unit dosis -Robot penanganan Wittman, tersedia tambahan sesuai permintaan pelanggan Cgjdpfx Asyhnvhebhen Kondisi: kondisi baik (kebocoran oli, monitor asli rusak)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 97.919 h, eb8e7efe Cgsdpfx Aeyhnrpjbhon

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN Cgjdpfoyhby Hex Abhsn • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm Cgodpfoyhbq Eox Abhen • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc Codsyg Nkwspfx Abhjgn • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 9.171 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control with a 15-inch touchscreen provides enhanced operator comfort. Take advantage of this opportunity to purchase an Arburg 520S-1500-400. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended two-stage closing program • Hydraulically servo-driven ejector on the moving platen • Injection/plastification unit: • Screw diameter: 45 mm (without nozzle) • High-wear-resistant design Codpfjyg I Ihsx Abhogn • Sintered metal non-return ring • CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature-resistant thermoplastics • Technology level 2 – servo-driven dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Auxiliary equipment: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in this listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced two-stage clamping program • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage Cjdpeyg I Egsfx Abhogn • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, ARBURG2014-1500T-HU Cgedjyg Ivxjpfx Abhjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, de-arburg-a520a-1500-400-hu-it-lt-lv-nb-nl-pl Cedpeyg Ivrefx Abhjgn

Kondisi: bekas, Tahun pembuatan: 1999, Mesin injeksi plastik Krauss-Maffei 800/5700MC tahun produksi 1999 untuk dijual. Data teknis tersedia berdasarkan permintaan. Cgedpfx Aboyg Hbgjhen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Cgsdpfoyg Eu Sex Abhen

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, Arburg Allrounder 630A Mesin Injection Moulding Plastik Multi Komponen (2021) Arburg Allrounder 630A 2500-800/400 L2, Mesin injection moulding plastik multi-komponen dengan gaya clamping 2500kN (2021), termasuk unit injeksi horizontal 800 dan unit injeksi vertikal 400. Cgedpfxsygx Urs Abhjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 40 mm, jarak antara tiang: 630 mm, volume langkah: 201 cm³, tekanan injeksi: 2.000 batang, panjang total: 7.050 mm, lebar total: 2.050 mm, tinggi total: 2.350 mm, berat keseluruhan: 13.050 kg, Perlengkapan: dokumentasi / manual, 1 Cedpfoygv Rwex Abhegn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 56.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.100 kN, diameter sekrup: 25 mm, volume langkah: 86 cm³, tekanan injeksi: 3.000 batang, tinggi cetakan (min.): 200 mm, langkah pembukaan: 450 mm, berat keseluruhan: 4.800 kg, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, 503665 Cgsdpfx Absygv Ntehsn

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8754-0010, Plastic injection moulding machine | DEMAG Ergotech – Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Cgodpfxoyguk Ao Abhen Clamping platen height [mm]: 660 Clear tie bar distance horizontal [mm]: 475 Clear tie bar distance vertical [mm]: 450 Diameter of centering ring [mm]: 125 Minimum installation height [mm]: 230 Maximum installation height [mm]: 560 Maximum opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread [M]: 16 Multi turntable type: turntable Turntable diameter [mm]: 700 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,160 Maximum tool weight, moving platen [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Unit arrangement: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7174-0115, Plastic injection moulding machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Tie bar spacing horizontal [mm]: 470 Tie bar spacing vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Cgsdpfx Aeyguhhjbhsn Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Rotary table diameter [mm]: 600 Thread rotary table [M]: 16 Maximum mould weight [kg]: 1,000 Maximum mould weight on moving side [kg]: 500 Screw diameter [mm]: EE1:30, EE2:22 Maximum shot weight [g] PS: EE1:94, EE2:42 Aggregate arrangement: EE1: horizontal, EE2: vertical Equipment: Core pull 2-fold, with robot Inspection available anytime by appointment. Free loaded on truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi110/470

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, gaya penjepit: 1.000 kN, diameter sekrup: 35 mm, berat injeksi: 132 g, berat keseluruhan: 3.650 kg, Arburg Allrounder 420C 1000-290 ini diproduksi pada tahun 2014. Mesin ini memiliki gaya penutupan sebesar 1000 kN, stroke pembukaan 500 mm, dan ukuran bidang penjepitan 570x570 mm. Berat tembakan maksimum adalah 132 g. Pertimbangkan untuk membeli mesin injection molding hidrolik Arburg Allrounder 420C 1000-290 ini. Hubungi kami untuk informasi lebih lanjut. • Stroke pembukaan: 500 mm • Ukuran pelat penjepit: 570 x 570 mm • Volume maks.: 144 cm³ Cgedpfxoyglrwo Abhen

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8040-0008, Kunststoff-Spritzgießmaschine-Demag-Ergotech-Systec-280-630-840 Cgedeygidwepfx Abhsn

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7169-2037, de-to-en-001 Csdpoygib Njfx Abhogn

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7363-0044, en-001 Codpoygiafefx Abhjgn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, SYNERGY-S-1750-460-NETSTAL-DE-2004 Cgedpfoygdgmsx Abhjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we present a well-maintained, used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also interested in purchasing well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current notice – Tax advice and benefits for used machines: From 01/07/2025, used machines can also benefit from special depreciation allowances of 30% per year for tax purposes. In addition to the price advantage over new machines, you can apply the same depreciation rates as you would for new equipment. Keyword: Growth booster (§ 7 Paragraph 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-Colour 2C machine Control: MC6 Cedpfxsyf Uy Us Abhegn Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h 1st injection unit: 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit: 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie-bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x air blow-off Water BGS: 6 circuits each side (nozzle/ejector) BluePower technology: up to 40% energy saving The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer. The machine is available immediately. Delivery: Free loaded onto buyer’s lorry or free delivery within Germany with reimbursement of shipping costs. For your information regarding the machines and our company: - We only sell our own machines, acquired from ongoing production, from our Hannover warehouse. - All machines are thoroughly checked and tested prior to removal. - WE DO NOT sell insolvency goods – WE ARE NOT brokers trading third-party assets. - All machines come from successful companies for whom maintenance is a standard procedure. - All machines can be inspected at our warehouse.