Pfs

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 81.912 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 202150, gaya penjepit: 180 kN, 1 Pgjdpfx Aeyxm Thsbxoi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, ENGEL DUO 5550/650 pico injection moulding machine Control System: CC200 Year of Manufacture: 2011 Operating Hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping Force: 6500 kN Tie Bar Distance (H × V): 1100 × 960 mm Platen Dimensions (H × V): 1510 × 1440 mm Mould Height (min./max.): 650 / 1150 mm Mould Opening Stroke: 1400 mm Max. Daylight Between Platens: 2050 mm Maximum Mould Weight: 11,000 kg Ejector Force: 95 kN Ejector Stroke: 250 mm Tie Bar Diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw Diameter: 90 mm (reinforced for up to 30% fibre content) Maximum Injection Volume: 2740 cm³ Maximum Shot Weight (PS): 2520 g Injection Pressure (max./boost): 2180 bar Standard Injection Pressure: 1910 bar Screw L/D Ratio: 20 Screw Stroke: 430 mm Maximum Screw Speed: 148 rpm Plasticizing Rate: 77 g/s Nozzle Contact Force: 150 kN 3. Drive and Power Supply Installed Drive Power: 90 kW Barrel Heating Power: 56 kW Number of Heating Zones: 6 Hydraulic Oil Tank Capacity: 1000 l 4. Special Equipment and Hydraulics Core Pull Circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade Valves: 4 pcs (installed on fixed platen) 5. General Characteristics Two-platen machine design (DUO series) for the production of large-size plastic components. The construction provides: - High rigidity of the clamping system - Suitable for heavy moulds and large opening strokes Additional Information: - Screw reinforced for up to 30% fibre content - All hydraulic hoses replaced in Q4 2024 Pgjdpeyw Aa Usfx Abxoi - Machine condition: mint, ready for production Machine available immediately, professionally maintained, and ready for instant operation.

Kondisi: diremajakan ulang (bekas), Arburg, Pengatur Pemanas Thermonic, Arburg Allrounder Pgodpfx Aoyvp Upobxji 4 unit regulator hampir baru. Disimpan sebagai suku cadang di bagian pemeliharaan.

Kondisi: bekas, Tahun pembuatan: 1999, jam operasional: 82.540 h, translation-001 Pgsdsyup D Hopfx Abxei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of Manufacture: 2008 Clamping Unit Clamping Force: 8,000 kN Tie Bar Distance (horizontal × vertical): 1120 × 1000 mm Platen Size (horizontal × vertical): 1620 × 1500 mm Minimum Mold Height: 500 mm Maximum Mold Height: 1050 mm Maximum Distance Between Platens: 2080 mm Maximum Mold Weight: 7,200 kg Opening Stroke: 1,030 mm Ejector Stroke: 350 mm Ejector Force: 139 kN Injection Unit Screw Diameter: 130 mm Shot Volume: 7,300 cm³ Shot Weight (PS): 6,640 g Maximum Injection Pressure: 1,300 bar Screw L/D Ratio: 20 L/D Electro-Hydraulic Equipment Pump Motor Rated Power: 110 kW Heater Power: 79 kW Hydraulic Oil Tank Capacity: 1,300 l Machine Dimensions and Weight Pjdpfxoyugcts Abxsgi Machine Dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine Weight: 33,500 kg Control Cabinet Weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system that increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electric power is consumed only when the machine requires it. Main Benefits - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of installation in existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: baik (bekas), Tahun pembuatan: 2001, NETSTAL S 6000-5500E Injection Moulding Machine Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of manufacture: 2001 Operating hours: 88,933 h Pedoyugcgspfx Abxsgi Clamping Unit Clamping force: 6,000 kN Platen dimensions (H × W): 1,620 × 1,550 mm Tie bar spacing (H × W): 1,020 × 1,020 mm Minimum mould height: 500 mm Maximum mould height: 1,000 mm Maximum mould opening: 1,950 mm Centring ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Shot weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions & Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system, which enhances the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter that adjusts the motor speed to the actual demand during the production cycle. As a result, electrical energy is consumed only when the machine actually requires it. Benefits of the ESS system - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower hydraulic system heating - Extended service life of hydraulic components - Possible retrofit for existing hydraulic injection moulding machines The ESS system allows for significant reduction in operating costs while maintaining full production parameters.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 63.546 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 210423, gaya penjepit: 100 kN, diameter sekrup: 25 mm, jarak antara tiang: 370 mm, kapasitas pemanasan: 56 kW (76,14 hp), daya pompa: 69 W, Arburg 370 S 2k 100t. Pedpfx Aoyrz H Uobxogi

Kondisi: bekas, Tahun pembuatan: 2016, Mesin injeksi plastik Pedpfx Abeyqwfdjxjgi Tipe: Arburg 820S 4000-4600 Tahun pembuatan: 2016 Volume injeksi PP = 2850 ccm Berat suntikan PP sekitar 2450 g Mesin ditawarkan tanpa aksesori tambahan, penanganan, atau pagar pengaman, artinya hanya mesin itu sendiri.

Kondisi: baik (bekas), Tahun pembuatan: 2007, gaya penjepit: 5.000 kN, diameter sekrup: 85 mm, volume langkah: 2.128 cm³, tekanan injeksi: 1.574 batang, berat injeksi: 1.937 g, tinggi cetakan (min.): 450 mm, Mesin injeksi Battenfeld HM 500/3400 Gaya penutupan: 500 t Tahun pembuatan: 2007 Berat injeksi: 1937 g Unit injeksi .../3400 Diameter sekrup: 85 mm Tekanan injeksi spesifik: 1574 bar Volume injeksi: 2128 ccm Berat injeksi: 1937 g Rasio L / D sekrup: 22 Sistem penutupan cetakan 500/... Gaya penutupan: 500 t Dimensi pelat cetakan: 1590 x 1470 mm Jarak antar tiang: 1000 x 800 mm Tinggi cetakan: 450 mm Jarak buka: 1150 mm Jarak maksimum antar pelat: 1600 mm Langkah ejector: 250 mm Data umum: Berat: 25000 kg Dimensi [p x l x t] [m]: 7,3 x 2,5 x 2,6 Perlengkapan: - 1 x katup pneumatik - 2 x inti hidrolik - koneksi euromap 67 Podpfx Absyqv Hmoxsgi - sistem injeksi bimetalik

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 27.000 h, gaya penjepit: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale The machine is in very good condition, having only been operated in single-shift production for small batch and sample runs. A new hydraulic pump was installed recently (approx. 300 operating hours). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and linear guides show no damage, like new - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Pjdpsyn Sc Ejfx Abxsgi Powered inspection possible. Further accessories such as Motan dryer, chiller unit and more available upon request. The machine can be dismantled and loaded by us by arrangement. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 30.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Clamping platen dimensions (H x V): 1600 x 1550 mm Clear width (H x V): 1120 x 1000 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening distance: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 cc Shot weight (PS): 3064 g Injection flow rate: 690 cc/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electro-hydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Number of cylinder heating zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Pedpfoymn Rvjx Abxsgi Accessories: - Oscillation dampers Additional equipment: - 1 x air valve - Tie bar pulling device - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Engel ES 2550/500 KG Gaya penutup 500 ton Pgjdjyl S Enepfx Abxoi Tahun pembuatan 1997 Jarak antar batang penahan 84x84 cm Sekrup 70 mm Berat injeksi 1230 g Tinggi cetakan (min-maks) 250 mm - 850 mm Berat mesin 25.500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Engel ES 2550/500 KG Daya Penjepit: 500 ton Tahun Pembuatan: 1997 Jarak antar tie bar: 84x84 cm Diameter sekrup: 80 mm Berat injeksi: 1402 g Tinggi cetakan (min-maks): 250 mm - 850 mm Berat mesin: 25.500 kg Pgjdpjyl S Ehsfx Abxoi

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 60.902 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206087, gaya penjepit: 400 kN, diameter sekrup: 22 mm, volume langkah: 34 cm³, Dijual mesin injection molding merek Arburg tipe 270 U 400-70. Mesin dalam kondisi berfungsi penuh dan siap langsung digunakan. Data teknis: Tahun pembuatan: 08 / 2007 Jam operasi otomatis: 60.902 jam Nomor seri: 206087 Podpfx Abeyk Tlasxsgi Tegangan operasi: 400 V Tegangan kontrol: 230 V (~ 50 Hz) / 24 V Arus nominal: 82 A / 39 A Gaya penutup: 400 kN Jarak antar tie-bar: 270 mm x 270 mm Unit injeksi: ukuran 70 Diameter screw: 22 mm Kontrol: Selogica Aksesori yang disertakan: Penarik inti, penutup jarum pneumatik, diverter selektif.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm Psdpfxsyg Hz Hs Abxogi • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 862-1053, plastic-injection-moulding-machine-mannesmann-demag-ergotech-500 0-2300 Podpfxeygikwj Abxsgi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, tech-specs-650t-molder Pedpfx Asyfh I Eobxsgi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 5.000 kN, berat keseluruhan: 26.400 kg, This 3-axis hydraulic injection moulding machine Arburg Allrounder 920S 5000-3200 was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range from 70 to 90 mm, and a maximum shot weight of up to 1,860 g. Take advantage of the opportunity to purchase this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Max. mould opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mould height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Weight of moving platen (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5 – 6.44 s • Total installed power: 96 kW Podpfx Aboydnigexogi • Colour: Structural light grey / Mint green / Red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection unit • Screw diameter: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticising capacity (PS): 185 / 215 / 250 kg/h • Max. injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heater capacity: 6 × 5,500 + 4,300 W • Installed nozzle heater capacity: 1,100 W • Oil tank capacity: 590 litres • Motor + heater fuse rating: 200 A • Motor fuse: 125 A • Heater fuse: 63 A

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, tekanan injeksi: 2.389 batang, lintasan ejektor: 135 mm, langkah pembukaan: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping platen dimensions (H x V): 1,520 x 1,470 mm Clearance between tie bars (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mould installation height: 675 mm Maximum daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/return: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Footprint approx.: 8.70 x 2.90 x 2.80 m Pedpfxjycqc To Abxsgi Total weight: 44,000 kg Electrohydraulic Equipment Rated pump motor power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls at moving platen 2 x hydraulic core pulls at fixed platen Robot interface according to EUROMAP 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Mounting plate (H x V): 1600 x 1600 mm Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Cylinder heater control zones: 7 Oil capacity: 1500 l Pgedoyb Sx Hepfx Abxji Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Kondisi: baik (bekas), Tahun pembuatan: 2002, 1 unit used injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM575-1900C2 Year of manufacture: 2002 Clamping force: 575 tons Tie bar distance: 1000 x 1097 mm Screw diameter: 70 mm Max. stroke volume: 1,097 cm³ Shot weight: 998 g/PS Control: MC4 Equipment: 5 core pulls Robot, manufacturer: Reis, year: 2015 24-fold hot runner control Pjdpfx Ajyak Htsbxjgi Conveyor belt Safety fence

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, gebraucht-spritzgiessmaschine-krauss-maffei-KM420-4300CX-2012 Pgsdsyak Ecopfx Abxji

Kondisi: bekas, Tahun pembuatan: 2018, 6 x Mesin Injeksi Stork Tipe Mesin Pengoperasian pertama Umur (bulan) 4400-2150 19.12.2002 278 Pgjdpex Uymaefx Abxoi 4400-2150 28.11.2012 159 4400-2150 14.08.2015 126 6600-5650 01.11.2011 171 9000-5650 30.05.2014 141 9000-5650 01.11.2018 87

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 Psdpfx Abox Uqa Doxogi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, KM 500/2700C2 Technical Data Clamping Unit: Clamping force: 5000 kN Tie bar spacing (h x v): 900 x 800 mm Minimum mould height: 480 mm Maximum platen distance: 1650 mm Centering diameter: 200 mm Mould weight: 7900 kg Injection Unit: Pjdpfx Aox Uqawobxsgi Screw diameter: 80 mm Shot volume: 1433 ccm Injection pressure: 1829 bar Equipment: MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!