Ares Servitec, S.L.U.

Kondisi: bekas, de_001 Iodoy S Tf Depfx Alcoib

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Iijdpsy S Ru Aofx Alceb Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 30.143 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 800 m³/jam, en-1 Iodey S Rtljpfx Alcoib

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.000 kg, kapasitas tangki oli: 3.100 l, berat kosong: 50.800 kg, tahun perombakan terakhir: 2025, laju aliran volumetrik: 795 m³/jam, en Iijdpfjy S Rruox Alceb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 900 kg, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2025, laju aliran volumetrik: 750 m³/jam, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Iisdpfx Ajy S Rqwslcob Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 1.950 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 750 mm, tinggi bal: 1.100 mm, berat bal: 550 kg, Perlengkapan: dokumentasi / manual, Automatic Baler HSM VK 4812 The machine is in perfect condition. Total hours worked: only 1,950; total number of bales processed: only 1,314. The machine was regularly serviced and has operated indoors since new. It processed very low-abrasion material – textile trimmings. Key advantages of the machine: - Actual throughput: 6–13 t/h Iijdpfx Ajy Sm Sqjlceb - Optimal continuous operation: 6–10 t/h - Very fast cycle → works well with belt conveyor lines - Significantly better than the 15–22 kW versions for high material volumes Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volumetric output: up to 332 m³/h Practical weight output: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical maximum output: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers available in stock. Transport costs depend on weight, volume, and most importantly distance. When inquiring, please provide the following information: delivery address (postal code and town/city). Further details require phone contact, so we ask you to inquire about transport costs and other delivery options by contacting us by phone. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. We issue intra-Community invoices – VAT exempt. Opening hours: Mon–Fri: 8:00–16:00 Sat: closed

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 3 t, Baler Orwak 5070 dalam kondisi kerja sempurna. Sudah diservis penuh, oli baru. Dilengkapi penuh – penahan tali, tali, kait, troli bal. Iisdpfoy Sk H Sox Alcjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 26 t, Orwak 3325 baler dalam kondisi kerja sempurna. Sudah diservis penuh, oli baru. Perlengkapan lengkap. Dilengkapi dengan suku cadang tambahan untuk pengikatan dengan kawat. Iiodpfjy Sk Atjx Alceb

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 5.812 h, Fungsionalitas: berfungsi sepenuhnya, Bale press Presto HPK 50 HS, year of manufacture 2012, with perforator and ascending belt (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive: 30 kW Pressing force: 50 t Feed opening: 1,600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. feed volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (LxWxH) Machine weight: approx. 10,500 kg Hydraulically movable perforator Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Ijdpjy R Tp Tsfx Alcsib Ascending belt Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2021, jam operasional: 123 h, Fungsionalitas: berfungsi sepenuhnya, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Iiedpfsy R Tncjx Alcsb Materials: film, paper, cardboard Remark: The press is in good condition. It has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the details provided or for any errors. Offers are subject to change, prior sale is reserved, and the offer can be withdrawn at any time. Inspections are possible by appointment. The sale is ex-site, without any warranty or guarantee. Our payment term is 100% advance payment.

Kondisi: baik (bekas), Tahun pembuatan: 2021, jam operasional: 450 h, Fungsionalitas: berfungsi sepenuhnya, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 450 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical pressing performance: 12 cbm/h Iijdpfx Aley R Srtsceb Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the given information or possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings available by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, lebar bukaan pengisian: 1.195 mm, panjang bukaan pengisian: 65 mm, panjang bal: 120 mm, lebar bal: 110 mm, tinggi bal: 120 mm, berat bal: 550 kg, lebar total: 1.570 mm, tinggi total: 2.985 mm, panjang total: 1.800 mm, berat keseluruhan: 2.403 kg, Merek: HSM Tipe: V-Press 1160 plus Tahun pembuatan: 2008 Tekanan press: 532 kN Tegangan: 400 V Berat maksimal bal: hingga 550 kg (tergantung material) Ukuran bal: 120 x 110 x 120 cm Berat mesin: 2403 kg Dimensi mesin: 180 x 157 x 298,5 cm Ukuran lubang pengisian: 119,5 cm × 65 cm Kondisi: sangat baik! Video mesin beroperasi tersedia atas permintaan Iiodjy R Sk Nopfx Alcjb Transportasi juga memungkinkan

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, daya: 22 kW (29,91 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 530 m³/jam, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pieces (as of April) Main press force: 50 t Specific pressure: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 l PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the Baler: The machine has been partly overhauled in our workshop and general maintenance work has been carried out. Upon completion of the refurbishment, the baler was tested during operation and is now ready for immediate sale. The following refurbishment work has been carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire feed marks in the feed channel welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Program menu language set to English - Two key switches in the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Electrical system of the agitator replaced, connected, and tested Press ram: - All four rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled, cylinder tube honed, all seals replaced, leak test conducted - All plastic wear blocks on the press ram replaced Pre-press flap: - Both bearings on the shaft of the pre-press replaced - Both hydraulic cylinders disassembled, overhauled, both cylinder tubes honed, all seal kits replaced, leak test conducted - Scraper flap on the pre-press replaced Tying system: - Two complete needles with wire redirect rollers replaced - Needles adjusted and set - All wire redirect rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced Ijdoy R Npiopfx Alcjib - All 8 wear plates on the twister, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is fully available. Inspection possible by appointment. We do not accept liability for the technical information and possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.050 mm, lebar bal: 100 mm, tinggi bal: 700 mm, berat bal: 500 kg, berat keseluruhan: 8.500 kg, kapasitas tangki oli: 400 l, daya: 15 kW (20,39 hp), tahun perombakan terakhir: 2026, laju aliran volumetrik: 108 m³/jam, Technical Data – Baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (corresponds to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 pieces Pressing force: 50 t Specific pressing force: 650 kN/m² Fill chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates with bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 l PLC control: Siemens S7-200 Effective transport dimensions (press only): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was used in an operational production environment exclusively for compacting cardboard, and has been serviced regularly. With only 13,209 operating hours, the machine has relatively low hours. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work has been completed: - Machine cleaned - Bale retaining claws freed up and lubricated - Photoelectric sensor replaced - Twister unit fully dismantled, disassembled, all bearings replaced, all plastic guides replaced, lubricated, chain tension adjusted Iedpfxoy R Npco Alcjib - Knives and counter-knives dismantled, sharpened, and reinstalled - Knife gap readjusted - General maintenance work carried out and lubricated Scope of delivery: - 1 x baler with wire spool boxes (without wire) (6850 x 1950 x 2650 mm) - 1 x bale chute (5100 x 1150 x 450 mm) - 1 x wire reel box for floor-mounting (1450 x 380 x 360 mm) For transport of the baler, a tautliner with an effective internal height of 2700 mm is required. Remarks: A complete set of documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.400 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 75 kW (101,97 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 300 m³/jam, en_001 Iisdpfx Alsy R Nnfjcob

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Merek: HSM Tipe: V-press 860 plus Tahun pembuatan: 2012 Tekanan tekan: 532 kN Tegangan: 400 V Berat bal maksimal: 480 kg (tergantung material) Ukuran bal: 120 x 110 x 85 cm Berat mesin: 2083 kg Dimensi mesin: 180 cm x 125 cm x 298,5 cm Ijdpfx Aloy N Ratocjib Ukuran lubang pengisian: 120 cm x 65 cm Kondisi: sangat baik! Telah dicek fungsinya. Video mesin saat beroperasi tersedia atas permintaan. Layanan FLITS Rental & Sales: setiap mesin dilengkapi dengan satu bundel kawat pengikat (120 kawat). Membutuhkan lebih banyak bundel kawat pengikat? Silakan ajukan permintaan penawaran.

Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 1.060 h, Fungsionalitas: berfungsi sepenuhnya, Bale press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Ijdpfxoy Ni She Alcjib Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or YouTube channel. The hydraulic hoses should be replaced. We are happy to answer questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the above information or any potential errors. This offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, advance payment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year 2019 Manufacturer: Dixi Iiedpfx Ajy Ni Rdslcob Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. You can find a video on our website or YouTube channel. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We do not accept liability for any errors in the information provided. Subject to prior sale and change without notice. Inspections are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2017 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Iiedpfxjy Ni I Aj Alcob Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, Cardboard, Film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We are happy to answer any questions you may have about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. We do not accept any liability for the information provided or possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, year of manufacture 2013 Technical Data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Ijdpfx Aoy Ni Hxolcsib Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00–14:00. On Fridays, we are available from 08:00–13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Dixi Year: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Size: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Isdjy Ni Hrepfx Alcjib Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not accept any liability for the details provided or possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made in advance payment, ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Dixi Model: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Iijdoy Ni Euepfx Alcsb Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale against advance payment ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2012 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Pressing Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370-410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Iodpey Ni Dqsfx Alcsib Machine Weight: approx. 5,420 kg Materials: Paper, cardboard, film The baler is in good condition. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical specifications are based on information provided by the manufacturer. We do not accept liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, 1 Isdey I Rnuepfx Alcjib

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penekanan: 80 t, dixi-80-sld-horizontalpresse Iijdpfx Aoy Iykxjlcob