Beli gergaji pembatas kaca bekas (5)

Kondisi: baru, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Work Table Designed for the simultaneous cutting of pairs of glazing beads on the sliding work table. The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping devices for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a carriage, manually movable. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sash frames. ----- Base price in the above configuration: on request! ----- Price ex works plus packaging, shipping, and current material surcharge of 6% on the total price Options at additional cost: ----- Pos. 1.1 1 set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, comprising 1 pc blade L1233 (left) and L1085 (right), with special 43° grind. Additional cost: 502.00 Euro Pos. 1.2 Holder for scanning gauge for RU-GL for transferring the measured values to the saw with pneumatic installation. Additional cost: 635.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 497.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made from square tube profile with 2 fixed and 2 adjustable cams for scanning glazing bead length Additional cost: 445.00 Euro Pos. 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after inspection of the glazing beads. Depending on the number of different types of glazing beads used, several spacer sets may be required. To determine the exact number, we require profile drawings of the intended glazing beads prior to order confirmation. Additional cost: on request, after submission of your glazing bead drawings Pos. 1.6 Operating time switch for independent extraction system. Redsxmkz Nepfx Abyocb Adjustable from 5 sec. to 3 hours. At each sawing operation, the extraction runs for the preset time. If sawing takes place again within this time, the extraction timer resets. Additional cost: 731.00 Euro ----- Total price ...

Kondisi: bekas, Tahun pembuatan: 2002, GERGAJI MITRA GANDA (GERGAJI LIS KACA) OMGA TRF 527 NC termasuk pembatas bintang Tahun pembuatan: 2002 Jarak minimum & maksimum antar unit: 158 mm, 2800 mm Redpfx Absxwumqoyscb Kapasitas potong pada 90 derajat: 55 mm Kapasitas potong pada 45 derajat: 40 mm Tinggi potong maksimum: 40 mm Daya motor: 2 x 1,18 kW Lubang mata gergaji: 30 mm Diameter mata gergaji: 220 mm Kecepatan spindle: 5000 rpm

Kondisi: baru, Tahun pembuatan: 2026, Number of motors: 2 units Working length: 3000 mm Control: Yes/CNC Loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm Rsdpfx Aboyy A Ikjyscb ----- For wooden glazing bars, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (inside) to 135° (outside) - Right head traversable - Saw blade mounting Ø 350 mm - Including 1 pc. central support - Pneumatic clamping of units - Positioning control Exenso DS3 with touch panel 15" display in a dust-protected monitor housing - 3-axis control, 1 longitudinal axis and 2 swivel axes - Manual input of cutting data - Processing data from a cut list (record as specified) - Processing data from a measuring stick (wireless caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Including control cabinet, motor and software licenses Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS Saw blade for wood Cross/flat tooth - positive Item 1.4 Article number 942.5236 2 sets DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping material from above (free access to work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure plate Clamps can be selected individually via the saw’s control system Clamping sequence can also be set via the control system Includes safety pre-clamping pressure Scope of supply with 2 sets: - 2 pcs (left/right) vertical swing clamps - 2 pcs (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 grooved table support (standard groove, special grooving per customer drawing upon request) Item 3.1 Article number 945.2007 DS350 packaging (transport frame) ----- Total price for this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of offcuts with square-cut glazing bars instead of 2nd set Pos. 1.3 943.5236 DS Combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder supports with clamping lever ----- OPTIONAL accessories, with additional charge on request: ----- Item 4.3 Article number 942.5237 DS Software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. When entering a cutting dimension > maximum cutting length of the system, the cut is performed in steps. (Left unit cuts, right unit moves material and cuts to size.) ----- Item 2.1 Article number 944.1023 GMF Caliper 3000mm Complete set (1500mm plus 1500mm extension) incl. charger and receiver. A robust aluminum measuring rod with a measuring range of 3,000 mm, ideal for measuring glazing bars. Functionality For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Kondisi: baru, Number of motors: 2 units Working length: 2,650 mm Control: manual Ruchser RU-GLS-ED 45° Glass Beading Saw ----- Designed for paired cutting of glass beads The RU-GLS-ED45° Double Glass Beading Saw is manually adjustable to the desired size. The machine is designed for the paired cutting of glass beads at a cutting angle of 45° and is equipped with one fixed and one movable saw unit. The manual length adjustment is fitted with an electronic digital display. Cutting lengths from 150 mm to 2,650 mm can be processed. During cutting, the glass beads are clamped from above and from the front with a pneumatic clamping device to prevent tilting. Operation is via safety two-hand control. Saw blade diameter: 250 mm, length: 3,700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glass Beading Saw ----- with manual dimension adjustment, for paired cutting of glass beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting lengths from 150 to 2,650 mm. Pneumatic clamping from above and front. Safety two-hand operation, saw blade diameter 250 mm, length 3,700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! Rsdpjxmk Dqjfx Abyjcb ----- Ex works. Packing and shipping extra. Options and Surcharges: ----- Item 1.1: Shim set for rebated glass beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after examining the glass beads. Depending on the number of bead types used, multiple shim sets may be required. To determine the exact quantity required, we need profile drawings of the glass beads to be used before order confirmation. Surcharge: on request, after receipt of your bead drawings Item 1.2: Fixture for measuring gauge transfer for RU-GL to transfer the measured length to the saw, with pneumatic installation. Surcharge: 611.00 EUR Item 1.3: Measuring gauge for glass beads, total length 2,550 mm, max. measuring length approx. 2,450 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 478.00 EUR Item 1.4: Measuring gauge for glass beads, total length 1,500 mm, max. measuring length approx. 1,430 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 428.00 EUR Item 1.5: Operating time switch for independent extraction Adjustable from 5 sec. to 3 hours. With every sawing operation, extraction runs automatically for the pre-set time. If another cut is made during this period, the timer resets. Surcharge: 702.00 EUR Item 1.6: 1 set of carbide saw blades for RU-GLS-P45 and RU-GLS-ED45°, D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 piece saw blade L6444 (right) and L6443 (left), special 43° grind. Surcharge: 576.00 EUR ----- All prices in EUR, net, plus VAT. (Technical information according to manufacturer, without guarantee!)

Kondisi: bekas, Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Redpfxsvpr N Re Abyscb