Atlas Trading

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 58.670 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping plate dimensions (H x V): 820 x 845 mm Clear distance between tie-bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Nodeydp Idepfx Abuekt Heating zones (cylinder): 5 Oil fill volume: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Anti-vibration mounts - Krauss Maffei robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration/isolation elements Nedpfx Absydp D Ejuokt - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 37.049 h, gaya penjepit: 4.000 kN, berat keseluruhan: 21.000 kg, This Arburg 820 S 4000 - 2100 injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter ranging from 60 to 100 mm, and a maximum shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and offers a hydraulic pump drive power of 55 kW. Ideally suited for high-precision plastic injection moulding applications. Please contact us for more information about this machine. Clamping unit • Max. locking force: 150 kN • Max. opening force: 100 kN / increased: 800 kN • Max. opening stroke: 700 mm • Min. mould height: 350 mm • Max. platen distance: 1050-1550 mm • Tie bar spacing (clear): 820 × 820 mm • Mould mounting platens (W × H): 1171 × 1171 mm • Max. mould half weight: 4500 kg • Max. ejector force: 100 kN • Max. ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Colour: Plastic-coated structure (light grey / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Combined power sockets: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 A Injection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Max. theoretical shot volume (cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Max. shot weight (g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Max. injection pressure (bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Max. injection rate (cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Max. injection rate with accumulator (cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Max. screw surface speed (m/s): 0.38 | 0.28 | 0.28 • Max. screw torque (Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Max. nozzle contact force: 110 kN • Max. nozzle stroke: 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and weights (basic machine) • Clear length: 490 mm • Electrical connection (fusing) motor + heating: 250 A • Electrical connection (fusing) motor: 125 A Nsdjydpvbopfx Abuekt • Electrical connection (fusing) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: Nksdpfx Aeydnp Hobuet • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, gaya penjepit: 3.430 kN, diameter sekrup: 60 mm, tinggi total: 2.397 mm, berat keseluruhan: 21.000 kg, panjang produk (maks.): 8.073 mm, This Toyo Si-350-6S JH750E-PACK injection moulding machine was manufactured in 2022. It features a clamping force of 3430 kN, a screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it is a robust choice for precision blank molding applications. Please contact us for further information on this machine. • Installed heating capacity: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 • Interfaces: Euromap 67, Euromap 73 Clamping unit: • Tie bar spacing: 810 × 810 mm • Platen size: 1050 × 1050 mm • Opening stroke: 700 mm • Mould height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kN Injection unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Hold pressure: 200 MPa Nkedsydnbpepfx Abust • Theoretical shot volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0-350 rpm • Injection stroke: 270 mm • Nozzle touch force: 39.0 kN

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 65.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, Clamping force: 3,500 kN Maximum mold opening force: 220 kN Movable platen drive force – open: 105 kN Movable platen drive force – close: 95 kN Mounting platen size (H x V): 1,100 x 1,095 mm Clear distance between tie bars (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Injection flow rate: 527 cm³/s Screw speed: 285 rpm Plasticizing throughput: 95 g/s Nozzle contact force: 110 kN Electrohydraulic equipment: Pump motor rated power: 75 kW Installed heating power: 30 kW Barrel heating zones: 6 Oil capacity: 720 l Dimensions and weights: Required floor space approx.: 6.50 x 2.20 x 2.40 m Total weight: 15,370 kg Maximum mold weight: 4,780 kg Accessories: - Anti-vibration elements Additional equipment: Nodpfx Abjydmkcjuokt - 1 x hydraulic core pull - 1 x air valve - Robot interface as per Euromap 12

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Njdsydbbvepfx Abuokt Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Injection weight (PS): 1464 g Injection flow rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Dosing unit colourant control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Kondisi: bekas, Tahun pembuatan: 2017, Serial no. 141342-100, Control system: Unilog B8, Clamping force: 1,800 kN, Clear tie-bar spacing: 570 x 520 mm, Mold installation height: 225 - 550 mm, Opening stroke: 480 mm, Maximum platen distance: 1,030 mm, Ejector stroke (hydraulic/electric): 180/160 mm, Ejector force: 40 kN, Dry cycle time: 1.7 s per 364 mm, Maximum mold weight: 1,800 kg, Minimum mold dimensions: 346 x 346 mm, Injection unit: Type 750, Screw diameter: 45 mm, Screw stroke: 200 - 225 mm, L/D ratio: 22, 1 hydraulic core pull, Theoretical shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Maximum screw rotation speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN. Injection/metering unit by Wittmann, Type Feedmax S3-NET, year 2021. Sprue picker/robot by Wittmann, Type WP80, year 2020, travel paths X/Y/Z: 100 x 550 mm x 90°. Compressed air hose reel by Metabo, Type SA250, L = 25 m. Machine weight: 7,200 kg, Operating hours: 15,564. This item is part of an online auction. Sale is subject to the approval of the principal. Nksdpfx Asyc Symebuet

Kondisi: bekas, Tahun pembuatan: 2017, Serial no. 140228-100, Control unit: Unilog B8, Clamping force: 1,800 kN, Tie bar spacing (clear): 570 x 520 mm, Mould installation height: 225 - 550 mm, Opening stroke: 480 mm, Max. platen distance: 1,030 mm, Ejector stroke hydraulic/electric: 180/160 mm, Ejector force: 40 kN, Dry cycle time: 1.7 s per 364 mm, Max. mould weight: 1,800 kg, Minimum mould size: 346 x 346 mm, Injection unit: Type 750, Screw diameter: 45 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 2 hydraulic core pulls, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Max. screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/nozzle force: 350 mm/40 kN, Injection/metering unit, Manufacturer: Wittmann, Type: Feedmax S3-NET, Year: 2017, Sprue picker/robot, Manufacturer: Wittmann, Type: WP80, Year: 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel, Manufacturer: Metabo, Type: SA250, Length 25 m, Machine weight: 7,200 kg, Operating hours: 17,844 Nedpoyc Stajfx Abuskt This item is part of an online auction. Acceptance is subject to the approval of the seller.

Kondisi: bekas, Tahun pembuatan: 2017, Serial no. 138524-100, Control unit type Unilog B8, clamping force 1,100 kN, clear tie-bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle travel/force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel axes X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 4,800 kg, operating hours 42,853 This item is part of an online auction. Sale is subject to the approval of the seller. Nkodpfx Abeyc Sqxjujt

Kondisi: bekas, Tahun pembuatan: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 – 450 mm, opening stroke 380 mm, maximum platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, maximum mould weight 1,000 kg, minimum mould dimensions 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 – 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 – 442 cm³, specific injection pressure 1,714 – 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, metering unit by Movacolor, injection/metering unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180 This item is part of an online auction. Nsdeyc Snkspfx Abuekt Sale is subject to the approval of the client.

Kondisi: bekas, Tahun pembuatan: 2017, Serial no. 138264-100, Control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mold installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mold weight 1,800 kg, min. mold dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038 Nkedpfx Aeyc Sh Djbuet This item is part of an online auction Award is subject to seller’s approval.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 43.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194413, gaya penjepit: 2.200 kN, diameter sekrup: 55 mm, volume langkah: 475 cm³, tekanan injeksi: 1.578 batang, berat injeksi: 440 g, tinggi cetakan (min.): 300 mm, lintasan ejektor: 180 mm, langkah pembukaan: 750 mm, berat keseluruhan: 12.740 kg, kapasitas pemanasan: 13,4 kW (18,22 hp), Here, as a dealer specializing in injection moulding machines, we are offering the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Notice and Used Machine Advantage As of July 1, 2025, used machines will also qualify for a special depreciation allowance of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine (keyword: "Growth Booster", § 7 section 2 EStG-E). Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 cm³ - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN Nksdpfx Aboyc Ewxsuot - Opening stroke: 757 mm - Max. platen distance: 1050 mm - Min. mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras: - Core pull The machine is very well maintained and can be inspected under power. Please note: any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: - Loaded free onto buyer's truck or free delivery to site against reimbursement of freight costs. Information about our machines and company: - We only sell machines from our own stock, acquired from active production, located at our Hanover warehouse - All offered machines are checked and tested prior to removal - We do NOT sell insolvency equipment and act NOT as brokers trading third-party property - All machines offered originate from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.000 kN, Perlengkapan: dokumentasi / manual, 1 Nkjdpfxjycvw Ao Abuot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cm³ Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Nkjdpfxoyctzfj Abuet Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, controlled by proportional valve x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on the vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in system for pressure quality control by Kistler – measurement of mould pressure Original Weber rotary table: very precise, driven electrically by a servomotor controlled by an inverter Rotary table diameter: 1200 mm Purchase of rotary table at extra cost Robot: Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servomotors: X, Y, Z (telescopic) Axis travel (approx.): X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Purchase of robot at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 4.000 kN, Perlengkapan: dokumentasi / manual, de-001 Nkedpfoyctyzox Abuet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Nodpfxsyctyuj Abuokt Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2000 bar Dosage Volume: 664 cm³ Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1510 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with Air Valve 3x Hydraulic Core Pull 13x Hot Runner Control Circuits Injection Unit Hardened - Bimetallic Main Drive Motor - Servomotor with inverter control Highly precise rotary table, servo-driven, controlled via inverter Rotary Table Diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus Sensor - Mold Pressure Regulation Conversion of the injection unit to vertical operation possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91 x 2.12 x 4.62 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests for the selected machine is available on request, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional Equipment: Nsdpfsyctyhex Abuekt Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – the machine is equipped with a system for setting the minimum mold height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes electrically driven by servomotors; C axis – pneumatic Stroke lengths (axes): X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch controller Robot with adapter, conveyor belt, and safety guard Robot and conveyor belt available for purchase at additional cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine, or participate in live technical tests at our facility in Łódź. Price: on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating Hours: 20,499 h in Automatic Mode Year of Manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosing volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pulls, controlled via proportional valve x 4 Hot runner control Hardened injection unit – bimetallic Proportional valve on the injection unit – precise dosing Machine equipped with two cylinders / battery with compressed nitrogen (additional charge for rapid operation) Machine designed for use with an electric rotary table. Features an inverter for servo motor control on the rotary table and the interface for table connection Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in side injection unit: ⌀25 mm – 45 g/PS Wittmann W823 robot Year of manufacture: 2015 Nedpfxoyctx Rj Abuskt 5-axis robot: 3 axes driven by servomotors (electric); C-axis and A-movement Travel paths (axes): X-550, Y-1,400 (telescopic), Z-3,500 Touch control panel Safety package for the robot Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at an additional cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service engineers prior to sale. A video of the technical trials of the selected machine is available on request, or you can participate in live technical demonstrations at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Nkodpfx Abjyctw Tjust Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Control with 12 hot runner zones Injection unit hardened - bimetallic Main drive motor - servo motor driven by inverter - Energy saving Injection unit powered by a servo motor controlled by an inverter Machine with a cylinder / battery with compressed nitrogen (extra charge for fast operation) Central lubrication Parallel movements Arburg Multilift Select robot, 6kg, transverse Year of manufacture: 03.2011 4-axis robot: 3 electrically driven axes with servo motors; C-axis pneumatic Travel paths on axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Arburg 570C 2000-350/150 / Production Line with Side Robot Arburg Multilift / 2C Machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping unit: hydraulic Nedpfx Abeyctwysuokt Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2-component machine (2K) Air valve x 1 Hydraulic core pull x 5 Controller with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for high-precision molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in a live technical demonstration at our facility in Łódź. Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 10.2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2,500 bar Metering volume: 154 ccm Njdpeyctwgjfx Abujkt Clamping unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Controller with 12 hot runners Reinforced injection units – bimetal Machine with two cylinders / tanks with compressed nitrogen (additional charge for fast operation) Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, very precise – electrically driven Rotary table and robot can be purchased at an additional cost Dimensions: Weight: 8,140 kg Length/width/height: 4.81x1.84x3.45 m All machines offered are started up by our service technicians before sale. A video of the technical tests for the selected machine can be provided, or you can attend live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, needle type, controlled by proportional valve x 2 Reinforced injection unit – bimetallic Proportional valves on injection units – precise injection Machine equipped with two cylinders / compressed nitrogen accumulators (additional charge for high-speed operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Original rotary table Rotary table can be purchased at additional cost Wittmann W823 Robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); Axis C and movement A Travel paths in axes: X-550, Y-1400 (telescopic), Z-3500 Touchscreen control panel Robot safety package Robot with adapter and safety guarding Purchase of the robot at additional cost Dimensions: Weight: 6,720 kg Length/Width/Height: 4.41x1.84x3.20 m All offered machines are started and tested by our service engineers prior to sale. Nedeyctwaspfx Abuskt It is possible to receive a video of the technical tests of the selected machine or to participate in live technical testing at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Arburg 470C 1500-400 Year of manufacture: 07/2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Nsdpfx Abjyctvpouskt Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be exchanged Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Arburg 470C 1500-400 Year of manufacture: 07/2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be exchanged Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Nkedpeyctviofx Abujt Drive: Pump/motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request