Eisenhardt Metallteile GmbH

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, mehrstationen-transfermaschine-riello Fpjdpfx Aaeytgpwjgjd

Kondisi: bekas, Tahun pembuatan: 2005, Tipe: Mesin Multispindle Merek: Buffoli Fpsdpfx Aaoyn Hf Uegod Model: 2D-TRIB10-6 CNC Tahun Pembuatan: 2005 Kondisi: Bekas Jumlah: 1

Kondisi: baru, Tahun pembuatan: 2024, lebar kerja: 1.500 mm, ketebalan pelat baja (maks.): 20 mm, Gunting plat hidrolik – Mesin pesanan khusus (waktu pengiriman sekitar 10-14 minggu) – termasuk pedal kaki, layar sentuh, area belakang dengan pengawasan fotocell, celah potong otomatis/elektrik, sudut potong otomatis/elektrik, penjepit hidrolik, bumper belakang bermotor hingga kedalaman 1000 mm - Gambar serupa - Fpedpjynatljfx Aagod

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 3.000 mm, ketebalan lembaran (maks.): 10 mm, Gunting plat hidrolik - mesin pesanan (waktu pengiriman sekitar 10-14 minggu) - termasuk pedal kaki, layar sentuh, ruang belakang dengan pemantauan sensor cahaya, celah potong otomatis/listrik, sudut potong otomatis/listrik, penahan hidrolik, pembatas belakang bermotor hingga kedalaman 1000 mm Fpsdpfx Ajym Uv Eoagjd -Gambar bersifat ilustrasi-

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki pendingin: 2.000 l, Used, well-maintained transfer machine / rotary indexing machine / dial machine MIKRON MULTISTAR CX 24 Fjdeyk Hraopfx Aagopd Availability: Immediate The following modifications have been carried out on the system: Machine: - All motor cables replaced. - All sensor cables replaced. - PLC program adapted to enable and disable collets. - Conversion to Knoll coolant system. - Electrical schematic was manually modified. - Frequency converter replaced. - Part selector mounted on the machine, including oil pump for oil return. Saw: - Saw control system converted to Mitsubishi i-QR control system. - Complete electronics of the saw renewed. - Saw was completely mechanically overhauled. Accessories: - 1 x Loading station (brass D= 3.9mm) - 1 x Unloading station - 1 x Part selector (8-way, see photo) - 1 x Lateral drilling unit - 1 x Rotating straightening device (completely re-bushed October 2023) - 1 x Feed / saw unit (control and inverter overhauled in 2021) - 1 x Pneumatic loading (via feed tube) - 1 x Chip conveyor with dirty water pump (without chip trolley) - 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump and vacuum pump, incl. low-pressure pump (5 bar) and high-pressure pump (60 bar) Machine has been operated with cutting oil. If you have questions or need further information, feel free to send us a message or give us a call.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-001 Fpjdpjyg Nwdofx Aaged

Kondisi: bekas, Mesin transfer rotary merek Technica, model Stemoflex Fodpfx Asydcm Hjagspd

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: tidak berfungsi, tinggi total: 2.500 mm, panjang total: 12.000 mm, lebar total: 4 mm, daya: 65 kW (88,38 hp), berat keseluruhan: 10.305 kg, Diameter batang (maks.): 110 mm, Diameter pipa (maks.): 110 mm, panjang pembubutan: 350 mm, diameter benda kerja (maks.): 110 mm, Perlengkapan: dokumentasi / manual, We offer this used Sinico SIN-O-MATIC TOP 2000 sawing and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control by NUM Fsdpfx Aasycr Nhogjpd Automatic machine for cutting to length and end finishing. Transfer machine with horizontal axis table for cutting and end machining of pipes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2500 parts/hour, and is designed for machining small to large workpieces: bar diameter up to 110 mm, finished part length up to 350 mm. Maximum versatility in the machining of pipes and bars. It is capable of performing the following operations: Beveling – Face Milling – Thread Cutting – Forming – Marking A variety of spare parts, clamping jaws, and accessories are included. The machine is still assembled but currently has a fault, which is why it cannot be demonstrated. If you have any questions or need further information, please feel free to send us a message or call us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: K.966610 M, tinggi total: 3.056 mm, panjang total: 4.825 mm, lebar total: 3.500 mm, Kami menawarkan unit mesin otomatis rotary table merk Mikron Multifactor tipe 60.015 yang kondisinya sangat baik. Fodpfx Aasx Ura Esgopd Mesin produksi tahun 1997 ini sangat terawat dan siap digunakan. Pemrosesan komponen putar dapat dilakukan di hingga 15 stasiun (maksimal 60 siklus per menit). Pemasukan material batang atau cincin dimungkinkan. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan hubungi kami!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Hydromat HB32/16 CNC, mesin transfer dengan 8x chuck dan 8x dudukan collet, kontrol Bosch MTX, dilengkapi dengan 16 unit pemrosesan termasuk 5x stasiun bubut CNC-50/100 dan 2x unit milling CNC 3-sumbu, robot articulating Stäubli, magazine pemuatan 4,2 m, sistem pendingin KNOLL dengan VRF / pompa tekanan tinggi dan pompa tekanan rendah. Mesin ini direkondisi total oleh HME AG pada tahun 2020 dan dilengkapi dengan kontrol Bosch MTX. Fpodpfexz Eavsx Aagsd

Kondisi: bekas, MIKRON_Multistar_CX-24_1500 Fpodpoxx U A Uefx Aagsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8450-02-001, diameter meja putar: 4.000 mm, Perlengkapan: konveyor serpihan, EN-TECH-DETAILS-001 Fpedpfxexur Ruo Aagsd

Kondisi: baik (bekas), Tahun pembuatan: 2010, Meja putar merek WEISS, tipe: TC 220T, tahun pembuatan 2010. Fodpfxjxr Dh Hs Aagjpd

Kondisi: bekas, 2x Pfiffner RT 100 Description: Rotary Index Table/Spindles: Clamping stations: 12 motor spindles Drive: Torque drive, water-cooled Measuring system: Direct Indexing time: 1.5 seconds Spindles: Water-cooled motor spindles C-axes: 0.001°, hydraulic clamping Speed: 5,500 rpm Power: 11 kW Clamping device: Chuck Base modules: Technology: Positioning module, 3-axis X-axis: 50 mm Y-axis: 100 mm Z-axis: 100 mm Measuring systems: Direct on all axes Coolant supply: Integrated Workpiece size (max.): 100 x 100 x 100 mm Station 1: Horizontal: Raw part feed (indexing belt + Stäubli robot) Vertical: Raw part measurement Station 2: Horizontal: 4-position turret, non-driven Vertical: Measuring reclamping error (C-axis zeroing) Station 3: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 4: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 5: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 6: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 7: Horizontal: Not equipped Vertical: 6-position turret with WAN, 10,000 rpm Station 8: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 9: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 10: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 11: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 12: Horizontal: Loading/unloading device with dual swivel gripper + discharge conveyor Equipment / Accessories: Chip management: Chip conveyor High-pressure system: 50 bar Fpjdpfxjw Si T Ao Aagjd Tool monitoring: ARTIS tool breakage control Raw material feed: Feed belt with robot Finished part removal: Discharge conveyor with 3-way separator Oil mist separator: Electrostatic filter Fire extinguishing system: Kraft & Bauer Part marking: Laser Part cleaning: HESO cleaning system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, b187f76c-8204-494b-9dc7-8126eda7b140 Fpedew Rqw Topfx Aagsd

Kondisi: belum diuji (bekas), Tahun pembuatan: 1967, Manufacturer: Steinel Model: 5-Station BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000kg General / Technical Data: 5-station rotary indexing special drilling machine for horizontal drilling operations with multi-spindle heads Number of drilling units: 4 Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type BE 10 VK Station 3 – Horizontal drilling unit, type BE 10 VK Station 4 – Horizontal drilling unit, type BE 10 VK Station 5 – Horizontal drilling unit, type BE 10 VK Feed of drilling units: Mechanical feed via quill Drill heads: Multi-spindle drilling units Rotary indexing table: Mechanically indexed to 5 positions, Ø 400mm Workpiece clamping: Hydraulic, via centric expanding mandrel, workpiece Ø approx. 80mm Machine dimensions (w x d x h): approx. Ø 1,800 mm x h = 2,200mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine designed for high-volume production • Features a robust cast iron machine table with lateral chip removal and separate coolant reservoir • Automatic safety protection door Fodsw H Rh Sepfx Aagepd • Fitted with a 5-station rotary indexing table • Heavy-duty cast iron machine table, ideally suited for custom machine rebuilding • Machine suitable for "rebuilding / refurbishment"

Kondisi: belum diuji (bekas), Tahun pembuatan: 1969, en-001 Fpsdsw H I R Rjpfx Aagod

Kondisi: siap digunakan (bekas), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing rate: 20 cycles/min, spindle stroke: 100 mm, drilling capacity (steel/brass): 20 mm/30 mm, thread cutting capacity (steel/brass): M30/M40. Documentation is available. An on-site inspection is possible. Fpodpfxsw Hglme Aagsd

Kondisi: bekas, Tahun pembuatan: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Steinel BE 10 VK Type Year of Manufacture: 1971 Weight: approx. 4,500kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations on workpieces with manual collet clamping. Drilling Units: 7 units Station 1 - Loading and unloading Station 2 - horizontal drilling unit, type BE VK, power 2.2/3 kW, adapter sleeve Ø 36mm Station 3 - vertical drilling unit, type BE VK, chuck for collets Station 4 - horizontal drilling unit, type BE VK, adapter sleeve Ø 36mm Station 5 - vertical spindle unit, type BE VK, adapter sleeve Ø 28mm Fpodpfxew E Hpvo Aagod Station 6 - horizontal drilling unit, type BE VK with additional guide, adapter sleeve Ø 28mm Station 7 - horizontal drilling unit, type BE VK, power 2.2/3 kW, adapter sleeve Ø 36mm Station 8 - vertical spindle unit, type BE VK, power 2.2/3 kW, adapter sleeve Ø 28mm Feed of the drilling units: mechanical feed via quill Rotary Indexing Table: mechanically indexed in 8 positions, Ø 500mm Workpiece clamping: manual collet chuck, Ø 45mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400mm x 2,500mm Power supply / Connected load: 380Volt, 50 Hz Accessories / Special Features: • The machine is designed for high-volume production • The machine has a rigid cast iron machine table with chip disposal to the rear and a separate large coolant tank • Extensive accessories for clamping and auxiliary devices • The machine features a mechanically actuated 8-station rotary indexing table • Coolant system with chip tray • Very rigid machine bed, also ideally suited for rebuilding for special purpose applications

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production capacity single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Fsdpfsw Emx Rjx Aagjpd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 110 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 150 mm, panjang benda kerja (maks.): 40 mm, lebar benda kerja (maks.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine’s original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Fpsdpfxewy I Tls Aagjd Repeat accuracy of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tube, extraction system, and tube Loading systems Vibrators Cabinets / side elements / upper channel / cabinet upper parts Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Kondisi: bekas, Tahun pembuatan: 1963, Fungsionalitas: belum diuji, Manufacturer: Steinel Model: 6 Stations Year of Manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations in small workpieces Fodjwyn S Uspfx Aagopd Number of drilling units: 7 Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread cutting unit Feed of drilling units: Mechanical feed via quill Drill heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: Hand-operated collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volts, 50 Hz Accessories / Special features: • Designed for mass production applications • Equipped with a sturdy machine table, swarf removal system to the underside of the table center, with a separate large coolant tank • Comprehensive range of clamping devices and auxiliary equipment • Fitted with a 6-station rotary indexing table

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Four nearly identical Pfiffner CNC rotary indexing machines are available. Year of manufacture: approx. 1999, Control system: Siemens S5/Siemens HME, Stations: 12, Operations: Sawing/Feed/Indexing, Operating hours: approx. 85,383. Included: loader, control cabinet, chip conveyor, coolant system, and a total of approx. 35 machining units. Documentation is available. On-site inspection possible. The machines are dismantled and stored, but it is possible to view similar machines in operation. One machine is incomplete and suitable for use as a spare parts donor. Fpjdpfx Aaowv Um Djgjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, 3 rotary indexing machines + 3 interlinking robots OVERVIEW - Bar feeder - Rotary indexing machine 1 (sawing + machining, clamping 1) - Rotary indexing machine 2 (machining, clamping 2) - Transfer to conveyor belt - Marking station - Deburring system - Stacking cell with ejection of measurement parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic feed of the bar and cutting of the workpiece Step 3: Robot takes the workpiece from the saw clamp and transfers it to the clamping fixture of rotary indexing machine 1 (station 1) Rotary Indexing Machine 1 (Machining Clamp 1) Station 2: Contour milling, left and right Station 3: Contour milling, top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), thread cutting M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second machine Rotary Indexing Machine 2 (Machining Clamp 2) Station 1: Robot takes the part from station 6 of machine 1 and places it in the clamping fixture of the second rotary indexing machine Station 2: Contour milling, bottom Station 3: Slot milling (2x) Station 4: Contour milling, bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar Feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Loading height: approx. 1200 mm Part buffer: 10 bars Rotary Indexing Machine 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Fodpfewqf R Nsx Aagepd Spindle units: 5 Tool turret: 1 Feed axes: 14+1+5 NC axes Rotary Indexing Machine 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feed axes: 9+1+3 NC axes Discharge Conveyor Chain conveyor: plastic workpiece carriers Incline: approx. 3° Length: 8,000 mm Part detection: at loading/marking/unloading stations Rotary Indexing Machine 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Deburring system expansion: blow-off of workpieces Robots: for loading/unloading the deburring system and stacking with SPC drawer MACHINE DETAILS Sound level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HB32-571, Perlengkapan: dokumentasi / manual, konveyor serpihan, TECHNICAL DETAILS Number of CNC units: 8 Control system: Siemens Chip conveyor: Knoll Filtration system: Vacuum rotary filter High-pressure system: Combiloop Bar feeder: 3 m UNIT OCCUPANCY PLAN Station 1: Sawing Station 2: Hydraulic Drilling Station 3 H: CNC Turning Station 3 V: Hydraulic Drilling Station 4: CNC Turning Fedpfx Aowkd A Doagepd Station 5: CNC Turning Station 6 H: Hydraulic Drilling Station 6 V: CNC Turning Station 7: No unit Station 8: CNC Turning Station 9: CNC Turning Station 10: Hydraulic Drilling Station 11: Hydraulic Drilling Station 12: CNC Turning Station 13: CNC Turning Station 14: Milling Station 15: Hydraulic Drilling Station 16: Hydraulic Drilling EQUIPMENT - Platform - Declaration of Conformity