Mesin transfer

EUBAMA S6

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61062, saluran batang: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Max. bar length: 3300 mm Max. bar diameter: 9.1 mm Control model: Siemens S7-200 Drive for part-off unit Stroke per slide: 7.15 mm Operating angle: 26.565° Face turning chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Crjdpfx Aoyx Ia Nonzog Nordmann tool monitoring system with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year of manufacture 2004) Oil filtration system (Knoll FKA 150) Scraper belt conveyor with coolant system High-pressure system FKA / 250 Tubing with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure amplifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Clamping plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Complete spindle unit with timing belt drive Coolant supply Cover plates for vacant stations Material stop (60 mm stroke) Part-off unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC axis Device for flushing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details on the machine can be found in the attached documents.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1996, berat kosong: 800 kg, diameter 1.5 - 160 MM Credpfswgm Sajx Anzsg stroke 400 MM weight 800 KGS tooling

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), This EUBAMA S6 rotary indexing machine was manufactured in 2006. It features a robust base frame, hydraulic connections, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. The machine is ideally suited for precision work and is additionally equipped with a facing head and a length control system with pneumatic cylinder and laser. Contact us for further information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Device carrier (left) TK420 • 108 drill holes • Pipework (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective cover • Part reversal unit – material guide • Guide axis • Cover plates with empty slots • Milling unit with NC feed • Clamping with timing belt pulley z1=16 • Timing belt pulley Z1=16 • Timing belt pulley Z2=20 • Timing belt 25 AT10 / 730 • Hydraulic unit 70 100 04358 32 l/min • Central lubrication • Deflector plate T - T Additional Equipment • Parts ejection console • Straightening and feed rollers • Clamping quick-change station 1 • Tools and tool holders • Actuating tools S6 • Ejector with gripper Cedex D If Topfx Anzsrg • Clamping jaws (plates) • Press-in unit for internal hexagon • Facing head PCD 100-01-101 • Length measurement with pneumatic cylinder and laser • Roller holder (star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit with integrated emergency shut-off valve • Compressed air maintenance unit DA 300

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) Codpfx Asu Ngyzjnzerg - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Crsdpfsmf Aw Aex Anzeg Number of spindles: 8

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled Crodpfouhauyjx Anzog - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT Crodpfx Ajuhatpenzjg - CNC control: SIEMENS 840D - Counter spindle - Polygon turning unit: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer.

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Crsdpfx Answ D Aq Tezjg manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Workpiece diameter – max.: 29 mm Workpiece diameter – min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece sizes: Diameter 26mm – 29mm Length 65mm – 66mm By using interchangeable parts in the clamping device, handling unit, etc., diameters of up to approx. Ø50mm and total lengths of up to roughly 400mm should be possible with some modifications. This is also dependent on tool lengths, machining lengths on the component, etc. Cedpfx Aolqac Sjnzjrg

Kondisi: bekas, Tahun pembuatan: 2017, en-GB Crjdpfsyqybbsx Anzeg