RIKUTEC Richter Kunststofftechnik GmbH & Co. KG

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110-750 CX Injection Moulding Machine Year of manufacture: 2007 Lodpfx Abexqzz Us Njru Machine Description The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit featuring a fully hydraulic clamping system. It is equipped with the MC5 control system with a colour monitor, integrated operating panel, and three USB ports. The machine includes a complete plasticising unit designed for processing thermoplastics, fitted with an abrasion-resistant version. The 45 mm screw is equipped with a non-return valve and open nozzle. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Moving platen force – opening kN 35.4 Moving platen force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould height mm 300 Platen opening stroke mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard / option) rev/min 265 / 355 Electrical-Hydraulic Equipment Parameter Unit Value Nominal pump motor power kW 22 Installed heater power kW 15.62 Number of heating zones on the barrel - 5 Number of dry cycles according to Euromap 1/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 153 cm³, tekanan injeksi: 2.174 batang, berat injeksi: 160 g, tinggi cetakan (min.): 250 mm, lintasan ejektor: 100 mm, langkah pembukaan: 450 mm, panjang pelat: 700 mm, lebar pelat: 700 mm, jenis arus masuk: tiga fasa, gaya penekanan: 80 t, Dijual: mesin tahun 2004, berfungsi penuh, dengan robot. Ljdpfxexqyhye Ab Njru

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Arburg 1200T 800-150 / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2005 Injection unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2500 bar Dosage volume: 54 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Air valve x 6 Hydraulic core pull x 6 Hot runner control system Injection unit hardened – bimetallic Rotary table diameter: 1200 mm Kistler sensor – mould pressure regulation Machine serviced by authorised Arburg service in Germany Dimensions: Weight: 7,400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Lrodpfx Abjxqyfls Nju Pump/Motor: 22 kW Heating capacity: 9.4 kW Total connected load: 31.4 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 420C 800-250 with Wittmann W721 Robot Year of manufacture: 2004 Injection Unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2,470 bar Dosage volume: 106 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Hot runner control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Lrjdpsxqyffefx Ab Nju Integrated Kistler pressure monitoring system - mould pressure measurement Original mould crane Wittmann W721 Robot Year of manufacture: 2007 4-axis robot: 3 axes driven by servomotors (electric); C-axis Travel paths per axis: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot available at extra charge Dimensions: Weight: 3,180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are commissioned by our service technicians before sale. A video of technical tests of the selected machine can be provided, or you are welcome to attend live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, arburg-420s-800-350 Year of manufacture: 11.2003 Injection Unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1,300 bar Dosage volume: 288 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Core pull control Lsdpsxqyd Uofx Ab Noru Hardened injection unit – bimetallic Proportional valve on injection unit – precise injection Integrated lateral original Arburg sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06 x 1.39 x 2.12 m Drive: Pump/motor: 18.5 kW Heating capacity: 10.2 kW Total connected load: 28.7 kW All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Arburg 420C 800-250 Year of manufacture: 1999 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 cm³ Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Lredpoxqydzofx Ab Nsu Control system: SELOGICA Additional equipment: Very good technical condition Machine produced injection-molded parts for the medical industry – cleanroom production conditions Euromap 12 Robot interface Core pull control Injection unit hardened – bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our site in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, en-Arburg 420C 800-250 with Amboss+Langbein sprue picker Year of manufacture: 1999 Injection unit: Screw diameter: 40 mm Shot weight: 158 g Injection pressure: 1390 bar Dosage volume: 188 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Lredpfx Aboxqydus Nou Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests performed on the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of manufacture: 2009 Injection unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1390 bar Dosage volume: 71 cc Clamping unit: Clamping force: 70 t Tie bar distance: 370x370 mm Platen size: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K machine Operating hours: 33,544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Controller with hot runner zones Reinforced injection units - bimetallic Proportional valves on injection units for precise molding Parallel movements Vertical injection unit - screw diameter Ø 20 mm (29 g/PS) Machine equipped with a cylinder / battery with compressed nitrogen (additional charge for fast operation) Machine equipped with built-in Arburg conveyor belt and original sorting flap Option to purchase an original Weber rotary table Possibility to change the screw diameter in both injection units to the sizes recommended by the manufacturer Dimensions: Weight: 4,440 kg Length/width/height: 3.48 x 1.58 x 2.97 m Drive: Pump/motor: 15 kW Heating capacity: 4.9 kW Total connected load: 19.9 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to obtain a video of the selected machine's technical tests or to participate in live technical tests at our facility in Łódź. Lrsdpfxoxqydne Ab Nsu Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Arburg 320K 700-250 with Arburg Multilift H Side Robot Year of Manufacture: 2005 Injection unit: Screw diameter: 40 mm Shot weight: 158 g Injection pressure: 1,390 bar Metering volume: 188 cc Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Platen size: 476x476 mm Ejector: hydraulic Clamping system: toggle Control system: SELOGICA Additional equipment: 3x air valve Hot runner control system Hardened injection unit - bimetallic Central lubrication Dimensions: Weight: 2,350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Ledoxqyc Djpfx Ab Nsru Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Arburg 320K 700-100 Year of manufacture: 2001 Injection Unit: - Screw diameter: 30 mm - Shot weight: 59 g - Injection pressure: 1550 bar - Dosage volume: 70 ccm Clamping Unit: - Clamping force: 70 t - Tie bar spacing: 320 x 320 mm - Platen size: 476 x 476 mm - Ejector: hydraulic - Clamping system: toggle lever Control system: SELOGICA Additional equipment: Ledjxqycqjpfx Ab Nsru - Hydraulic core pull x 1 - Injection unit hardened - bimetallic - Central lubrication - Original Arburg mold crane, 2 lifting speeds, load capacity 100 kg Dimensions: - Weight: 2170 kg - Length/Width/Height: 2.94 x 1.45 x 1.99 m Drive: - Pump/motor: 11 kW - Heating capacity: 4.9 kW - Total installed power: 15.9 kW All machines offered are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company site in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 370H 600-290 e² / Hybrid Machine Year of manufacture: 03.2012 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping Unit: Clamping force: 60 t Tie bar distance: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle lever Ljdpfsxqyb Tox Ab Njru Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Main drive motor - servo motor with inverter for energy saving The injection unit is driven by a servo motor controlled by an inverter Proportional valve on the injection unit – precise injection Automatic mold height adjustment Central lubrication Machine equipped with a cylinder / battery with compressed nitrogen (additional charge for fast operation) Built-in sorting flap Dimensions: Weight: 3350 kg Length/Width/Height: 4.00x1.46x2.04 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: 11.2011 Injection Unit: Screw diameter: 20 mm Shot weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping Unit: Clamping force: 60 t Tie bar distance: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - touchscreen Ljdpfxexqyb Ho Ab Noru Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter - energy saving The injection unit is powered by a servo motor controlled by an inverter Machine equipped with a cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Dimensions: Weight: 3190 kg Length/Width/Height: 3.68x1.45x2.04 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company site in Łódź. Price: Upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Arburg 370C 600-100 Tahun pembuatan: 1995 Unit injeksi: Diameter sekrup: 30 mm Berat injeksi: 59 g Tekanan injeksi: 1550 bar Volume dosis: 70 ccm Unit penutup: Gaya penutup: 60 t Jarak antar tiang: 370x370 mm Ukuran pelat pemasangan: 570x570 mm Pendorong: hidrolik Unit penutup: hidrolik Kontrol: DIALOGICA Perlengkapan tambahan: Katup udara x 1 Lrodsxqya Nopfx Ab Nou Penarik inti hidrolik x 2 Dimensi: Berat: 3.600 kg Panjang/Lebar/Tinggi: 4,30 x 1,59 x 2,08 m Penggerak: Pompa/Motor: 11 kW Daya pemanas: 4,2 kW Total daya: 15,2 kW Semua mesin yang ditawarkan akan dijalankan oleh teknisi layanan kami sebelum penjualan. Dimungkinkan untuk mendapatkan video pengujian teknis mesin yang dipilih, atau ikut serta dalam pengujian teknis secara langsung di perusahaan kami di Łódź. Harga: Atas permintaan

Kondisi: sangat baik (bekas), Arburg 320C 600-250 / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Metering volume: 144 cm³ Clamping Unit: Clamping force: 60 t Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Lodpexqyapofx Ab Njru Additional equipment: Very good technical condition The machine has been used to produce injection-moulded parts for the medical industry – clean production conditions Core pull control Hardened injection unit – bimetallic Integrated sorting flap Dimensions: Weight: 2,330 kg Length/Width/Height: 3.65 x 1.48 x 1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to attend live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 320C 500-170 Year of manufacture: 2011 Injection Unit: Screw diameter: 35 mm Shot weight: 105 g Injection pressure: 1,470 bar Dosing volume: 115 cc Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core pull control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Original Demag tool crane: chain, electrically operated, 2 lifting speeds Dimensions: Weight: 2,310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/Motor: 11 kW Heating capacity: 9.4 kW Total connected load: 20.4 kW All listed machines are started up by our service technicians prior to sale. Lredoxqx Uxjpfx Ab Neu It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 320C 500-100 / Excellent Technical Condition Year of manufacture: 10.2004 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2000 bar Dosage volume: 49 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: The machine is in excellent technical condition and was used for testing injection molds. Operating hours: 25,739 h in automatic mode Total operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units – bimetallic Proportional valve on injection unit – precise injection Integrated system for quality pressure control by Sensor Kistler – mold pressure measurement The screw diameter can be changed to smaller or larger: 20 mm or 30 mm Dimensions: Weight: 2,300 kg Length/Width/Height: 3.18 x 1.47 x 1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 4.9 kW Total power: 19.9 kW Lredpfxoxqx Urj Ab Neu All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 320C 500-250 Year of manufacture: 11/2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 cm³ Clamping unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Ledexqx Ulopfx Ab Neru Hydraulic core pull x 1 Injection unit hardened - bimetallic Dimensions: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Arburg 270C 500-100 Year of manufacture: 1998 Injection Unit: Screw diameter: 20 mm Shot weight: 26 g Injection pressure: 2500 bar Dosage volume: 31 cm³ Clamping Unit: Clamping force: 50 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runner support Injection unit: hardened — bimetallic The machine is equipped with an additional control panel—remote operation possible The machine has been regularly serviced by authorized Arburg service Dimensions: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Ljdpfx Aoxqx Ufjb Noru Drive: Pump/Motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All machines offered are started up and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Arburg 320A 500-170 with sprue picker / Electric Injection Moulding Machine Year of manufacture: 2005 Injection Unit: Screw diameter: 35 mm Shot weight: 105 g Injection pressure: 1470 bar Dosage volume: 115 ccm Lrjdsxqx Tzopfx Ab Nsu Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: electric Clamping unit: toggle lever system Control system: SELOGICA Additional equipment: Electric machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Injection unit hardened – bimetallic Central lubrication Machine equipped with integrated Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pump/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the selected machine’s technical tests or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Arburg 320C 500-170 with Wittmann W811 Robot Year of manufacture: 12/2006 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Lredpjxqx Tusfx Ab Neu Platen dimensions: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1 x air valve 1 x hydraulic core pull Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Integrated sorting flap Wittmann W811 Robot Year of manufacture: 2010 4-axis robot: 3 axes driven by servomotors (electric); C axis - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel Safety package for robot Robot with adapter and protective housing Optional purchase of the robot for an additional charge Dimensions: Weight: 2400 kg L x W x H: 3.41 x 1.47 x 1.99 m Drive: Pump/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Metering volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar distance: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by frequency inverter - energy-saving Proportional valve on the injection unit – precise injection Self-sealing nozzle Arburg Multilift Select robot, 6 kg, transverse mounting Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); B and C axes Travel paths in axes: X-600, Y-800, Z-1000 Robot including adapter, conveyor belt and safety enclosure Purchase of robot and conveyor belt for an additional charge Dimensions: Weight: 2210 kg Ljdpfoxqx Tnox Ab Njru Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2,000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen dimensions: 446x446 mm Lredpoxqx Thsfx Ab Nju Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control Hardened injection unit – bimetallic Proportional valve on injection unit – precise injection Possibility to change screw diameter Dimensions: Weight: 2,370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are commissioned by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Arburg 680CB 400-170 / Vertical Injection Moulding Machine, Tie-bar-less / Excellent Technical Condition Year of Manufacture: 2012 Injection Unit: Screw diameter: 25 mm Shot weight: 54 g Injection pressure: 2,500 bar Dosage volume: 59 ccm Clamping Unit: Clamping force: 40 t Ledpfjxqx Sqox Ab Noru Tie-bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Excellent technical condition Vertical, tie-bar-less injection moulding machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Hot runner control x 12 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Screw diameter change possible Machine regularly serviced by authorised Arburg service Original Arburg tool crane Dimensions: Weight: 6,500 kg Length/Width/Height: 1.97x1.69x3.40 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Arburg OK-C S350-60 / Vertical Injection Moulding Machine with Sliding Table / Very Good Technical Condition Year of manufacture: 2008 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2,500 bar Dosing volume: 20 ccm Clamping Unit: Clamping force: 35 t Tie bar distance: 0x0 mm Platen size: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Vertical injection moulding machine with sliding table 3 stations on sliding table Air valve x 4 Hydraulic core pull x 1 Hot runner control Hardened injection unit - bimetallic Parallel movements Infrared safety curtains Screw diameter change possible Lodpfx Aexqx Rasb Neru Dimensions: Weight: 2,500 kg Length/Width/Height: 2.55x1.85x3.52 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Arburg 221KS 250-75 / Universal Machine Year of manufacture: 1999 Injection unit: Screw diameter: 20 mm Shot weight: 26 g Injection pressure: 2350 bar Dosage volume: 31 cm³ Lrjdpfx Aexqx N Njb Neu Clamping unit: Clamping force: 25 t Tie bar spacing: 221 mm Platen size: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine – the injection unit can be operated vertically as well as horizontally Control system with air valve Core pull control Hardened, bimetallic injection unit Clamping bracket for the vertical mounting of the injection unit Dimensions: Weight: 1,150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pump/Motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request