ASG Fertigungs- & Werkstofftechnik UG

Kondisi: sangat baik (bekas), Weiss Type: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Model Series WK3-../0 with SIMPAC* control system Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulbs 2 x 24 V, 50 W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Main fuse required: 16 A slow-blow Protection class (control cabinet and operating unit): IP 54 Maximum heat output to ambient: 1200 W Sound pressure level (measured 1m from the front at 1.6m height): 46 dB(A) Data for temperature testing: Temperature range: -5°C to +90°C Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climate testing: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98% r.h. Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg Important safety information for you as the buyer! The following measures are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components Iodsx Ag R Sepfx Ab Ioa 2. New, legally compliant refrigerant refill 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of supply: (see image) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Dijual: Sterilisator / Pengering Udara Panas Chirana HS 62A Saya menawarkan sterilizer udara panas Chirana HS 62A yang sepenuhnya berfungsi untuk dijual. Alat ini cocok untuk pengeringan, sterilisasi, atau pengujian suhu berbagai material. Ini adalah perangkat laboratorium yang kokoh buatan Cekoslowakia lama, terkenal dengan keandalannya dan kemudahan pengoperasiannya. Isdexz Ah Dopfx Ab Ioa Detail teknis: Model: Chirana HS 62A Konstruksi ruang logam berdinding ganda Pengaturan suhu yang presisi Cocok untuk laboratorium, fasilitas produksi, bengkel layanan, dan operasi teknis Kondisi: Perangkat dalam kondisi teknis yang sangat baik dan siap digunakan segera. Harga: 300 EUR Lokasi: Ivanka pri Nitre

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Data teknis: Tegangan operasi: 400V AC Sekering maksimum: 16A Frekuensi: 50/60Hz Daya listrik terpasang: 3,4kW Rentang suhu: +5°C di atas suhu ruangan hingga 300°C Deviasi suhu ruang pada 150 °C: ± 3,8K Deviasi suhu waktu pada 150 °C: ± 0,7K Waktu pemanasan hingga 150 °C: 29 menit Waktu pemulihan setelah pintu dibuka selama 30 detik pada 150 °C: 6 menit Tingkat pergantian udara pada 150 °C: 18x/jam Volume ruang dalam: 400l Iedpfx Aboxzulns Iea Beban maksimum per rak: 35kg Beban maksimum total: 90kg Konsumsi energi pada 150 °C: 1.200Wh/jam Jumlah rak maksimum: 10 Dimensi luar: Lebar: 1.235mm Tinggi: 1.025mm Kedalaman: 765mm Dimensi dalam: Lebar: 1.000mm Tinggi: 800mm Kedalaman: 510mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Data teknis: Isdpfoxzukkjx Ab Iea Tegangan operasi: 400V AC Sekering maksimum: 16A Frekuensi: 50/60Hz Daya listrik terpasang: 4,5kW Rentang suhu: +12°C di atas suhu ruangan hingga 300°C Penyimpangan suhu ruang pada 150 °C: ±2,0K Penyimpangan suhu waktu pada 150 °C: ±0,6K Waktu pemanasan hingga 150 °C: 25 menit Waktu pemulihan setelah pintu dibuka 30 detik pada 150 °C: 6 menit Tingkat pergantian udara pada 100 °C: 5x/jam Volume ruang dalam: 741 l Beban maksimum per rak: 45 kg Beban total maksimum: 315 kg Konsumsi energi pada 150 °C: 800 Wh/jam Jumlah maksimum rak: 16 Dimensi luar: Lebar: 1.235 mm Tinggi: 1.025 mm Kedalaman: 765 mm Dimensi dalam: Lebar: 1.000 mm Tinggi: 800 mm Kedalaman: 510 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 5 h, Fungsionalitas: berfungsi sepenuhnya, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a highly precise testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Applications ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid quality control Isdpoxzrbajfx Ab Ija Efficient & Rapid Testing The test duration corresponds exactly to the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor (paddle) ✔ Rapid temperature stability thanks to small chamber volume ✔ Dynamic measurement via sinusoidal shear strain with low amplitude and frequency ✔ Precise data acquisition using a load cell, connected to state-of-the-art electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of supply: Mini Rheometer, software, Windows 11 PC, volumetric punch

Kondisi: sangat baik (bekas), en-GB: Weiss Ijdpfjxzprcox Ab Iea Model: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a test chamber of the type WaterEvent SWT 1000 from Weiss Technik – ideal for standard-compliant testing of enclosure or component water protection classes. With optional equipment, tests according to IPX9K (high-pressure/steam jet), ISO 20653, and other standards are possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Degrees of Protection & Tests Depending on its configuration, the SWT system can cover a broad range of tests: Basic configuration: IPX3 / IPX4 testing (spraying and splashing water from all directions). Optional: Higher protection classes up to IPX5 / IPX6 (jet water), and — with suitable high-pressure equipment — up to IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection ratings) or ISO 20653 (e.g., for vehicle or outdoor applications) — depending on the target application and field of use. Typical Areas of Application Some typical scenarios for using such a test chamber: - Electronic devices or enclosures intended for outdoor or humid environments, such as outdoor lighting, control cabinets, assemblies, panels. - Components for vehicles or machinery, especially where subjected to rain, splashing, or high-pressure cleaning (e.g., construction equipment, e-bike or vehicle parts). - Batteries or electrical components that require water protection testing — e.g., in the automotive industry or e-mobility. Technical Data: Suitable protection ratings: IPX3 / IPX4 Swing pipe radius (for IPX3/4 tests): standard 200 mm (for SWT 1000) — optionally up to 400 mm. Test chamber (internal space) dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or graphical user interface for programming and controlling the tests. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: baik (bekas), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1000 mm, Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature homogeneity: ±0.5 to ±2 Temperature change rate, cooling: 10 K/min Temperature change rate, heating: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 480 liters Left side: 1x side port Ø 125 mm Left side: 1x side port Ø 50 mm Right side: 1x side port Ø 125 mm The chamber is water-cooled. Test Chamber Illumination: Halogen bulb 24 V, 50 W Electrical Connection: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated power: 17 kW Rated current: 30 A Refrigerants: R-404A / R-23 Weight: approx. 1250 kg Isdpfjxzgn Ijx Ab Iea For your safety as a buyer, the following information: The following steps are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0500237016, tegangan masuk: 400 V, lebar track: 300 mm, tahun perombakan terakhir: 2024, tinggi kabinet kontrol: 300 mm, lebar kabinet kontrol: 300 mm, panjang sabuk konveyor: 200 mm, tinggi produk (maks.): 250 mm, sekring listrik: 16 A, Kami menjual detektor logam CEIA kami. Alat ini berfungsi penuh dan telah diperiksa secara tahunan oleh perusahaan CEIA. Iedpfxjxyzzts Ab Isa Dijual karena tidak digunakan.

Tahun pembuatan: 2003, Kondisi: bekas, 2 unit tersedia Dimensi (dalam): 320 x 270 x 400 (t) mm Dimensi (luar): 920 x 800 x 600 (t) mm Ijdoxyzvdepfx Ab Ioa Kapasitas ruang suhu: sekitar 35 liter Rentang suhu: -70°C hingga +180°C Saluran pipa: 85 mm Tegangan listrik: 230V +6/-10% 1/N 50Hz Arus nominal: 10A Daya nominal: 2 kW RS232 Tipe: VT 7004

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, en_Binder MKF 115 E5 Chamber equipped with an air dryer One year warranty on spare parts Description MKF 115 Binder MKF climate chambers with temperature control (-40°C to 180°C) and humidity control. BINDER MKF series environmental simulation chambers are ideally suited for all cold and heat testing carried out according to recognized temperature and climate testing standards, compliant with DIN and IEC norms. Their high user comfort and extensive standard equipment offer clear advantages in daily operation. Key features: - Temperature range: -40 °C to 180 °C - Humidity range: 10 to 98% RH - Built-in 20 L water tank (models 115, 240, 720) - 4 potential-free relay contacts - 1 stainless steel wire shelf - Preheating chamber technology e™ - Intuitive touch screen controller with time segment programming and real-time software - Internal data logger, measurement values in open format readable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control with capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition Iedpfxexyy Nco Ab Isa - Diagnostic system with optical and acoustic alarm - Access port with silicone plug (models 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right) - Independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm - 4 castors, two with brakes - Computer interface: Ethernet - 230 V socket on right side panel (models 115, 240, 720) - Ramp function available - Built-in strip chart recorder - Real-time clock - Door heating - Alarm message if fresh water tank is empty (models 115, 240, 720) - Leak protection for hoses, covering both supply and drain lines up to 1 m height - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Perangkat seperti baru tahun 2025 ex demo Produsen: Binder Model: KBF 115 Tahun produksi: 2025 Tipe: Ruang iklim dengan kondisi tetap Rentang suhu: 0-70°C Rentang kelembapan: 10–80% Pengontrol kelembapan: sensor kelembapan + pelembapan uap Ijdpfxexyy Hhs Ab Ija Daya: 2 kW Kapasitas: 115 liter Koneksi Ethernet Dimensi internal: 60 × 35 × 45 cm Dimensi eksternal: 70 × 103 × 90 cm

Kondisi: sangat baik (bekas), en-Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is used to test the ingress of water into enclosures. In conjunction with a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for protection class tests to IPX3 and IPX4. Integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Programmable test duration Mechanical load specifications: Maximum test load (evenly distributed): - Permissible test sample weight for carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Specifications for IP protection class testing: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ± 60° - Oscillation angle IPX4: approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Isdpfxoxxuytj Ab Ija Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see images) (Subject to technical modifications and errors. All information without guarantee!) For further questions, please contact us by phone.

Kondisi: baik (bekas), LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 Carbon Analyzer is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption. The infrared (IR) source consists of nichrome wire, which is heated to 8,500 °C by resistance heating. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. Carbon dioxide can be used to illustrate the process; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed when the gas flows through the cell, thereby preventing it from reaching the IR detector. An IR cell is used as both a reference and a measurement cell. Total carbon in the form of carbon dioxide is continuously and simultaneously recorded. The initial reference level or baseline for the detector is set by flushing the cell with oxygen to expel remaining atmospheric gases. Technical specifications: Required gases: Carrier gas: Oxygen 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar). The source must be oil- and moisture-free. Gas consumption (based on typical analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Oxygen: 501-291 O2 regulator Compressed air: 766-036 regulator Iedpfx Asxxaxuob Ioa Inert gas: 764-216 regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage: Without PC: 10 sample weights, 50 results, 5 methods Without PC: Internal memory / Optional external display Without PC: LCD (16 x 26 characters) Power requirements: Analyzer: 230 V, ±10%, 50/60 Hz, single phase, 15 amps max. Operating current: 12 A Standby current: 4 A Condition: used Scope of supply: (see image) (Technical data and specifications subject to change and correction!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VTS 7060-5 Halogen bulb 24V, 50W Vötsch temperature test chamber with color touchpanel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm Isdpfexw Uqpox Ab Ioa External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1 m (free-field measurement): < 69 dB(A) Feedthrough left side: 50 mm diameter Feedthrough right side: 2x125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 16 kW Rated current: 30 A Required fuse (to be provided on-site): 29 A slow-blow Cabinet is water-cooled Refrigerants: R-404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated instruments. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Tahun pembuatan: 2013, Kondisi: baik (bekas), Mesin Uji Universal Zwick/roll Tipe: 1488 Dimodernisasi tahun 2013 dengan perangkat lunak Daya uji maks: 200 kN Iedsxw N Uvspfx Ab Isa Kebutuhan ruang: Lebar: 2.000 mm Tinggi: 2.100 mm Kedalaman: 800 mm Berat: sekitar 1.000 kg.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan video mikroskop pengukur CZW 1 dari HITEC dalam kondisi terbaik, tipe 250 x 170 mm. Perangkat lunak M3: deteksi tepi otomatis, pemeriksaan toleransi sesuai DIN/ISO, tampilan elemen dengan input toleransi, tampilan bagian dengan pengukuran, tampilan gambar langsung selama pengukuran, penyimpanan gambar tambahan untuk dokumentasi Anda. PC layar sentuh dengan Windows 7 Sertifikat kalibrasi berlaku hingga 31.07.2025. Iedpfx Abexwb Saj Iea Seri produk CZW1 mendukung Anda dalam pengukuran yang sangat presisi dan berulang untuk benda kerja kompleks dari semua jenis material. Berkat banyaknya pilihan seperti lensa zoom, berbagai panjang sumbu Z, dan berbagai ukuran meja ukur, CZW1 menawarkan semua kemungkinan untuk kebutuhan pengukuran spesifik komponen Anda.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We are offering a top-quality HITEC QZW 1 measuring microscope here Model: 250 x 170mm M3 Software: automatic edge detection, tolerance checking according to DIN/ISO, element view with tolerance input, part view with dimensioning, live image display during measurement, additional image storage for your documentation Dell touch PC with Windows 10 (upgradeable to Windows 11) Iodpfxjxwb Hqs Ab Ioa Calibration certificate valid until 31.07.2025 MEASURING RANGE X-, Y-AXIS: 250 x 170 mm LENGTH DEVIATION: 1.9 μm + L/100 (L in mm) MEASURING RANGE Z-AXIS: 150 mm MEASURING SYSTEM Z-AXIS: optional CAMERA: USB 3.0, 25 frames/s, 2.0 megapixels OBJECTIVE LENS: fixed lens / optional zoom lens 0.7x - 4.5x (manual/motorized) MAGNIFICATION: 40x / 35x - 225x (zoom lens) FIELD OF VIEW: 8 mm / 9 mm – 1.5 mm (zoom lens) SURFACE LIGHT: 4-segment LED ring light (optional coaxial surface light) TRANSMITTED LIGHT: LED (optional telecentric) POSITIONING: laser pointer TABLE LOAD CAPACITY: max. 20 kg DELIVERY CONTENT: QZW1, 23" touchscreen PC, M3 software, calibration certificate, operating manual Applications The QZW1 series supports you in highly accurate, repeatable measurements of complex workpieces made from all materials. Thanks to numerous options such as zoom lenses, various Z-axis lengths, and different measuring table sizes, the QZW1 offers you full flexibility to meet your specific measuring requirements.

Kondisi: sangat baik (bekas), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-Contact Strain Measurement System for Materials Testing Machines Description The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise strain recording during tensile, compression, and bending tests. Using contactless measurement via digital image processing, the system tracks markers on the sample surface—without any mechanical influence on the test results. Iedpfx Aexvxwkob Iea Ideal for applications where traditional contact extensometers (e.g., with knife-edges) are unsuitable—such as with thin, delicate, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated via Bluehill software (depending on system version). Special Features: - Non-contact strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low maintenance and robust for laboratory use Technical Data: Feature / Specification Measurement Principle: Optical, non-contact strain measurement Fields of View: 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement Accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data Rate: 50 Hz Recommended Markings: Dots approx. 2 mm Ø (for 50 mm FOV) / lines ~1 mm wide Gauge Length: Depending on field of view, e.g., min. 5 mm with 50 mm FOV Applications: Tensile, compression, and bending tests at room or elevated temperature Power Supply / Interface: via Instron system control (compatible controller required) Reliable & durable: Proven Instron Model 2663-822 Important Note: "The table shown in the pictures is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Tahun pembuatan: 1963, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 1762, Universal Testing Machine UHP 60 – Losenhausenwerk Düsseldorf-Grafenberg Isdpjxvp H Ajfx Ab Isa For sale is a Universal Testing Machine, model UHP 60, manufactured by Losenhausenwerk A.G., Düsseldorf-Grafenberg. This machine was originally built in the 1960s and is a classic testing device for tensile, compression, bending, and shear tests on metallic and non-metallic materials. Technical Data (according to original documentation) Maximum static test force: 60 t Maximum dynamic test force: 40 t Test pressure: approx. 235 bar Stroke height (piston extended): approx. 3865 mm Total weight: approx. 2500 kg Foundation pressure: approx. 5400 kg/m² Gripping head distance: 0–1000 mm Working cylinder diameter: 180 mm Maximum piston stroke: 235 mm Adjustment speed of lower grip: up to 750 mm/min Grip width: 80 mm (max. opening 40 mm) Distance between compression plates: 150–400 mm Compression plate diameter: 230 mm Distance between bending supports: up to 1000 mm General Information Year of manufacture: 1963 Serial number: 1762 Year of acquisition: 1963 Gripping head distance: up to 1000 mm Bending test: support span 50–1000 mm Shear test: 15 mm Ø specimens Condition The machine comes from a laboratory inventory, is complete, and was kept fully functional until recently. Due to its age, it is being sold as untested and without any warranty. Special Features Robust industrial quality “Made in Germany” Includes original documentation, nameplates, and machine card Ideal for collectors, museums, or for restoration 💡 Collection preferred due to weight (approx. 2.5 t).

Kondisi: sangat baik (bekas), Weiss Model: WKL 34/40 Weiss Climate Chamber Air-cooled -40°C to +150°C Internal volume: 34 liters Standard built-in cable ports: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -40 to +150 °C Temperature deviation in steady state (according to IEC 60068-3-5): Temporal fluctuation in the center of the workspace: ±0.3 to ±1 K ±1 to ±2 K Spatial deviation (temperature gradient): 2 to 4 Rate of temperature change (according to IEC 60068-3-5): Heating: 2.5 K/min Ijdjxvpp Ropfx Ab Ija Cooling: 3.5 K/min Maximum heat compensation: 800 W Specifications for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98% RH Temperature and humidity deviations (steady state, according to IEC 60068-3-5): Temporal temperature fluctuation in the center of the workspace: ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation in the center of the workspace: ±3 to ±5 % RH Operating data: Test space illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ±10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Customer-side fuse: 16A slow-blow Heat emission, air-cooled test cabinets Maximum heat dissipation to the environment: 800 W Refrigerant: R-404A Weight: 110 kg Important note: “The table shown in the photos is not included in the sale.” Important information for your security as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors!) If you have any further questions, please feel free to contact us by phone.

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), 1 Ijdpfx Aoxvdfmsb Isa

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.000 mm, Mahr 828 mesin ukur panjang bekas lengkap dengan aksesori – tersedia segera Kami menawarkan mesin ukur bekas merek Mahr, tipe 828 (jalur pengukuran langsung 0–200 mm, jarak lintasan 1000 mm) dalam kondisi sangat terawat, lengkap dengan aksesori ekstensif dan paket perangkat lunak PC untuk kalibrasi jam ukur, set pin batas, cincin, dll. Ijdpfx Aboxvb Hho Isa Pengoperasian & Kondisi: Mesin dalam kondisi siap pakai, telah digunakan dan dirawat secara rutin. Kunjungan dan demonstrasi mesin dapat dilakukan dengan janji temu jika berminat.

Kondisi: baik (bekas), Rangka pemasangan untuk kaca jendela Omega 100 - dibuat sesuai pesanan, tidak standar. Harus dilihat langsung atau hubungi untuk spesifikasi teknis. Isdpsxu U N Hofx Ab Iea

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Dijual mesin uji tekan otomatis merek Controls, model Pilot, tahun produksi 2014, tipe C56C02, no seri 14002524. Kapasitas gaya hingga 3.000 kN. Mesin press ini digunakan di laboratorium jalan. Mesin press dalam kondisi sepenuhnya berfungsi dan terawat, dilengkapi dengan sertifikat kalibrasi terbaru yang diterbitkan oleh OUM di Łódź, sertifikat kalibrasi dengan tanda PCA. Paket penjualan meliputi manual pengguna dan perangkat lunak pada CD. Iodpfx Aoxu Twcsb Ioa

Kondisi: bekas, Weiss Ijdpjxu I D Dofx Ab Isa Type: WK111-600 Weiss Climate Test Chamber, air-cooled Specifications for Temperature Testing: Temperature range: -5°C to +90°C Temperature fluctuation over time: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (Corresponds to a temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Specifications for Climatic Testing: Temperature range: +10°C to +90°C Humidity range: 10 to 98% r.h. Temperature fluctuation over time: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (Corresponds to a temperature gradient): 1 to 2 K Humidity fluctuation over time: ±1 to ±3% r.h. Test chamber dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1000 mm x depth 1660 mm x height 1975 mm Ports: 1 port Ø 50 mm installed on the left 1 port Ø 125 mm installed on the right Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Chamber volume: 600 liters Weight: 540 kg Important safety information for buyers: The following checks are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.