Empresa Remihc Catalunya S.L.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 850 mm, panjang umpan sumbu Y: 520 mm, panjang umpan sumbu Z: 510 mm, Mesin dalam kondisi teknis yang baik. Ruang gerak x, y, z: 850 x 520 x 510 mm Ukuran meja: 1000 x 510 mm Kapasitas beban meja maksimal: 500 kg Jarak dari spindle ke meja: 150-660 mm Jarak dari alas ke pusat spindle: 585 mm Kecepatan gerak cepat x/y/z: 30/30/24 m/menit Rentang kecepatan: 80-8000 rpm (opsional 10k/12k/15k) Taper spindle: 40 bt / cat Sistem kontrol: SINUMERIC Diameter alat maksimum: 76 mm Panjang alat maksimum: 250 mm Bobot alat maksimum: 7 kg Bedpfx Aox Akfyjarslr Waktu pergantian alat: 6 detik Pengganti alat otomatis dua arah: tipe lengan ganda 24 (opsional 20-32) Siklus tapping tetap Interpolasi spiral Berat mesin: 5.500 kg Konveyor serpihan termasuk dalam mesin. Inspeksi mesin saat bekerja dapat dilakukan dengan perjanjian sebelumnya.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F200 ECO Premium CNC Milling Machine directly from the manufacturer. F200 ECO - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Torque drive motor S1 operation: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Torque drive motor S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery volume: 35 l/min Tank capacity: 116 liters Cleaning pump Precision in Milling Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid traverse X-, Y-, Z-axis: 48 / 48 / 48 m/min Motor torque Bsdpexyh Dbsfx Aarjlr X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Speed Range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling Table Distance spindle to table: 100 - 650 mm Table length x width: 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. load capacity: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Equipment Linear guides with ball screws for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Handheld electronic pulse generator with enabling button and emergency stop RJ45 connection and 230V power outlet Machine light in the work area Cleaning gun Ball screws and linear guides by THK Chip flush Spindle head cooling (machining area) Electrical cabinet Arm-tool changer SW24 CE marked *Additional options available

Kondisi: bekas, Tahun pembuatan: 2004, CNC-Fräsmaschine PMER Typ DPM Verfahrweg X: 780 mm Verfahrweg Y: 410 mm Verfahrweg Z: 550 mm Blsdpfxexxazce Aarjr Numerische Steuerung: ANILAM Typ 5000 M Aufnahmekegel: ISO 40 Spindelabgang: 120 mm (manuell) Spindeldrehzahl: 70 bis 3800 U/min Tischgröße: 1270 x 320 mm Baujahr: 2004 Max. Abstand Spindelnase/Tisch: 500 mm Min. Abstand Spindelnase/Tisch: 100 mm Schwenkbarer Kopf rechts/links Handrad Manueller Betrieb (mit Handrädern) oder CNC-gesteuert möglich Schmieranlage Betriebsspannung: 380 V Breite: 1900 mm Tiefe: 2100 mm Gesamthöhe: 2500 mm Gewicht: 2,5 t

Kondisi: bekas, Tahun pembuatan: 2002, CNC-Fräsmaschine PMER Typ S120 Verfahrweg X: 1200 mm Verfahrweg Y: 630 mm Verfahrweg Z: 600 mm Numerische Steuerung: ANILAM 5300 (defektes ANILAM-Display durch PC-Monitor + PC-Tastatur ersetzt) Werkzeugaufnahme: BT 40 Spindeldrehzahl: 50 bis 6000 U/min Tischgröße: 1600 x 500 mm Baujahr: 2002 Max. Abstand Spindelnase/Tisch: 730 mm Min. Abstand Spindelnase/Tisch: 130 mm Durchmesser Spindelhülse: Ø 150 mm Pneumatische Werkzeugklemmung Bsdpfxoxxayls Aarslr Zentral-Schmierung Schmierstoffpumpe Spannung: 380 V Breite: 2300 mm Tiefe: 3600 mm Gesamthöhe: 2600 mm Gewicht: ca. 4,5 t

Kondisi: bekas, Tahun pembuatan: 2017, mk4xr980 Blsdpoxwzftjfx Aarjr

Kondisi: baik (bekas), Tahun pembuatan: 1998, jam operasional: 17.260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: - X-axis: 800 mm - Y-axis: 500 mm - Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Spindle speed range: 50 - 4,000 rpm Infinitely variable feed rate: 5 - 2,000 mm/min Rapid traverse in all axes: 8 m/min Swiveling vertical milling head: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3,000 x 2,400 x 1,975 mm Weight: approx. 3,000 kg Accessories / Special Features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives Bljdpfx Aaoxtu H Nerjr • Data interface V 24/ RS 232 • Swiveling vertical milling head ± 90° right/left with quill adjustment • Hydraulic tool clamping vertical + horizontal ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation due to stable, heavily ribbed cast iron guideways • Ball screw drives for X, Y, and Z axes • All electrical operating elements arranged on one side, in movable control console • Fixed angle table with foldable chip guard cover • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 1997, panjang pemakanan sumbu X: 900 mm, panjang umpan sumbu Y: 450 mm, panjang umpan sumbu Z: 400 mm, Gerakan X/Y/Z: 900/450/400 mm Luas meja: 1120x400 mm Blodpfextaxdjx Aarjr Beban maksimum meja: 600 kg Tirus spindle: ISO 50 Daya listrik total: 20 kVA Dimensi keseluruhan mesin PxLxT: 2560 x 3280 x 3355 mm Berat total mesin: 4550 kg Sistem kontrol: Heidenhain TNC 415 Mesin termasuk aksesori berikut: sumbu ke-4, ragum, dudukan alat, collet, probe, dan manual.

Kondisi: baik (bekas), Tahun pembuatan: 1986, CNC universal milling machine Make: DECKEL Type: FP5NC Year: 1986 Control: DIALOG 4 Travel paths: X710mm Y600mm Z500mm Clamping table: 1000mm x 550mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Machine in stock. Bedpfxsxr A A As Aarelr

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2010, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: M-075.068.10, panjang pemakanan sumbu X: 750 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 640 mm, kecepatan spindel (maks.): 12.000 rpm, kecepatan spindel (min.): 50 rpm, lebar meja: 520 mm, panjang meja: 900 mm, CNC Milling Machine Emco MC 75/50 No. Mesin: M-075.068.10 Tahun pembuatan: 2010 termasuk 30 holder alat SK40 dengan baut penarik termasuk sumbu putar ke-4 termasuk berbagai alat dan holder termasuk konsentrat pendingin Bodpsxn Hy Rofx Aarolr PERHATIAN: Mesin dijual dalam kondisi perlu perbaikan. Kontrol mesin mengalami kerusakan: Heidenhain MC420 termasuk dokumentasi dan manual pengoperasian tanpa garansi dan jaminan

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, CNC Universal – Mesin Milling & Bor DECKEL MAHO DMU 80 P duoBlock Dengan kontrol lintasan MILL PLUS iT Tahun pembuatan: 2006 Perjalanan sumbu: X 800 Y 800 Z 800 mm Rentang kecepatan putar: 0 – 8.000 rpm tanpa tingkat (SK 50) Dengan perlengkapan berikut: Meja putar NC 900 mm x 700 mm area penjepitan (beban meja maks. 1,4 t) Kepala frais universal dengan sumbu B terkontrol Penukar alat universal dengan 40 slot majalah sebagai penangkap ganda (SK 50) Kabinet pelindung penuh dengan pintu geser dan lampu interior IKZ – 40 bar Konveyor serbuk Rotoclear Probe pengukur 3D Heidenhain TS 641 Mode operasi 3 + 4 Handwheel elektronik Blodpsxn Aczsfx Aaror 50 buah dudukan alat SK 50 3 buah alas mesin yang dapat diatur ketinggiannya Perlengkapan transportasi Manual operasi

Kondisi: belum diuji (bekas), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from the manufacturer JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideally suited for precise milling operations on workpieces up to 700 kg including clamping device. — Technical Data • Working range X/Y/Z: 800 × 500 × 500 mm • Table working surface: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal travel of table: 800 mm • Max. vertical travel of the console: 500 mm • Max. cross travel of spindle head: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guideways: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t — Features & Special Equipment • Vertical, swiveling milling spindle on cross-adjustable traverse • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belts on preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterbalance for the console • Manual adjustment via electronic handwheel • Heidenhain CNC control in a swiveling control console, control cabinet mounted on machine base • Includes documentation and operating manual • Additional images and videos available on request — The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT, subject to prior sale and errors. Bledpfxjxk Tzge Aarsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 6.200 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Ini adalah sel robot murni yang awalnya melayani dua mesin Hermle C40U. Hanya sel robotik tanpa mesin yang dijual. Sangat cocok untuk retrofit otomatisasi pada mesin yang sudah ada atau sebagai sumber suku cadang. - Tahun pembuatan 2008, Kuka Robot Kr210-2 2000, berat palet maksimum 200 kg - Kontrol KRC 2 Bsdpfx Aaow Sdc Serslr - Sistem dirancang untuk penanganan palet, bukan penanganan komponen - Rak dengan 51 posisi palet - Stasiun setup - Dirancang untuk dua mesin - Lingkup penawaran: Sel robotik dengan robot KUKA, sistem kontrol dan panel KPC2, 16 palet yang sesuai, serta pelat adaptasi ke mesin Kondisi sangat terawat Robot dalam kondisi sepenuhnya berfungsi hingga pembongkaran. Catatan: Sel robotik langsung tersedia.

Kondisi: bekas, Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, 1 bekas: Mesin Frais Universal, bekas • Produsen: Klopp • Model: FW 11/4 • Tahun pembuatan: tidak diketahui, sekitar 1970 • Permukaan meja: 1100 x 300 mm • Dudukan spindle: SK 40 • Kepala frais bisa diputar: 2x 110° • Kecepatan spindle: 40/80/120/240/480/960 RPM • Feeding: 12-340 mm/menit Bjdpfxjw R T A Es Aarslr Aksesori: Berbagai dudukan dan pemotong, 1 set collet Ragum hidrolik dengan pelat alas pneumatik Lebar rahang ragum 160 mm

Kondisi: bekas, Mesin Frais Universal Merek: OPTIMUM Model: MT 100 Tahun produksi: 2018 – telah dicek bengkel No. mesin: J33021808035 Pemeriksaan geometris dengan protokol pengujian Perlengkapan: - Layar digital 3-sumbu DPA 2000 - Kepala frais vertikal SK 40 dengan ulir pengikat M 16 Bedpow Rlvqofx Aarelr - Meja tetap 1.120 x 260 mm (alur-T: 14 mm) - Lampu mesin - Perangkat pendingin cairan - Pelumasan sentralis manual - Buku petunjuk pengoperasian Bekas, dijual apa adanya, tanpa garansi Mesin secara teknis sesuai dengan standar tahun produksinya.

Kondisi: bekas, Tahun pembuatan: 1989, x-axis travel 750 mm y-axis travel 270 mm Bljdpfx Aaow Hlzgersr z-axis travel 300 mm Table size 900 x 350 mm Spindle taper ISO 40 Spindle speeds 18–1600 rpm Operating hours 2543 h Digital readout 3 axes Heidenhain Total power requirement 10 kW Machine weight approx. 1570 kg Space requirement approx. 2.60 x 3.80 x 2.35 m Universal milling machine Berlett FE1-10, year of manufacture 1989 Very robust toolroom milling machine with extensive accessories. Various machine vices. Manual rotary table Various tool holders and milling cutters Coolant tank Full tool cabinet with milling cutters, etc.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 27.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M342-06207026DHA, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, lebar meja: 1.020 mm, panjang meja: 510 mm, TECHNICAL DETAILS Axes Travel X-axis travel: 760 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table Clamping area: 1,020 x 510 mm Bodpew Eih Ijfx Aarjlr Spindle Speed range: 10 - 10,000 rpm Tool Holder Tool holder: SK 40 DIN 69871 Number of stations: 24 Control unit: Ultimax 4 MACHINE DETAILS Electrical Data Voltage: 400 V Phases: 3 Frequency: 50 Hz Operating hours: 27,500 hours Dimensions & Weight Dimensions: 3,900 x 4,100 x 2,800 mm Weight: 2,900 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, The machine is on display and has only been used for demonstration purposes. Optimill F 150 HSC Premium CNC milling machine direct from the manufacturer. F 150 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Dimensions and weights Length: approx. 3000 mm Width/Depth: approx. 1950 mm Height: approx. 2310 mm Weight: approx. 4350 kg Drilling/Milling performance Maximum cutter head size: 63 mm Maximum shank cutter size: 32 mm Rapid traverse speed X-axis: 36,000 mm/min Y-axis: 36,000 mm/min Z-axis: 36,000 mm/min Electrical data Power supply: 400 V Power frequency: 50 Hz Electrical connection Total rated power: 31 kVA Milling table (horizontal) Length: 900 mm Width: 410 mm Overhang: 480 mm Vertical spindle – table distance (min.): 102 mm Vertical spindle – table distance (max.): 562 mm T-slot size: 16 mm Number of T-slots: 4 Distance between T-slots: 102 mm Maximum load capacity: 350 kg Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Coolant system Number of coolant pumps: 3 pcs. Coolant pump drive power (each): 1.27 kW Tank capacity: 210 l Flow rate: 66 – 100 l/min Pneumatic connection Operating pressure: 5 – 7 bar Bedpew Ea Ixjfx Aarslr CNC Control Type: Sinumerik 828D System software: SW 28x CNC memory: 8 MB Block change time: 1 ms Look Ahead: 150 Number of tools: 512 Travel X-axis automatic: 760 mm Y-axis automatic: 440 mm Z-axis automatic: 460 mm Vertical spindle Spindle taper: SK 40 DIN 69871 Speed range: 12000 rpm Main drive motor power (continuous duty S1): 9 kW Main drive motor power (S6-30% duty): 21.2 kW Main drive torque (continuous duty S1): 57 Nm Main drive torque (S6-30% duty): 135 Nm Feed force X-axis: 3.0 kN Y-axis: 5.5 kN Z-axis: 5.5 kN Feed motor torque (continuous duty S1) X-axis: 7.3 Nm Y-axis: 10.5 Nm Z-axis: 15 Nm Tool changer Design: Double-arm gripper Number of tool stations: 24 Max. tool diameter with adjacent pockets empty: 125 mm Max. tool diameter: 80 mm Max. tool length: 200 mm Max. tool weight: 8 kg Included options: PPU 290 touch panel 12000 rpm inline spindle Chip conveyor, screw type 70 bar external through-spindle coolant (IKZ)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Machine is on display. Optimill F 300 HSC Premium CNC milling machine directly from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D controller stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guideways with roller recirculation on all axes for high load capacities • High-torque servo drives, directly connected to the ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm with inline spindle • Solid, precise milling table with five T-slots, large dimensions, and precision-ground • Portable electronic handwheel with enabling switch and emergency stop button greatly simplifies program setup • Tool changer double-arm gripper with 30 tool positions • Coolant system with chip flushing and cleaning gun • Through-spindle coolant 20 bar • Chip conveyor (belt type) for efficient chip removal • Chip bin • Oil mist separator • Machine light in the work area • Siemens warranty extension package and free OSS Plus online/on-site service • 1 year Basic maintenance contract included in DE/AT/CH • Control • 15.6” color display • 16:9 format • Comprehensive package • Safety Integrated • Remnant material detection and reworking • ShopMill step programming • Network drive management • 3D simulation • Graphic recording • Siemens OSS PLUS extension package • 12 months; Article No. 3589020 • 24 months; Article No. 3589021 • 36 months; Article No. 3589022 • Equipment details • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Milling table horizontal • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Blodpfew Ea Ifsx Aarjr • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Main drive motor rating, S1 continuous duty 20 kW • Main drive motor rating, S6-30% duty 52.4 kW • Motor torque, S1 continuous duty 96 Nm • Motor torque, S6 30% duty 250 Nm • Feed force • X-axis feed force 6.68 kN • Y-axis feed force 6.68 kN • Z-axis feed force 12.01 kN • Feed motor torque • X-axis, S1 continuous duty 20 Nm • Y-axis, S1 continuous duty 20 Nm • Z-axis, S1 continuous duty 36 Nm • Tool changer • Double-arm gripper • Number of tool positions 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool change time tool-to-tool 2.5 s

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool stations - All linear guides have stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed-loop control) - Belt-type chip conveyor for efficient chip removal - Chip bin - Max. spindle speed: 10,000 rpm - Integrated machine lamp in the work area - Portable electronic handwheel with enabling button and emergency stop switch. Significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change occurs automatically or at the push of a button - Robust, precise milling table, large dimensions, accurately surface-finished - Very spacious access doors to minimize cleaning and maintenance time - „SINUMERIK 808D on PC“ software package included (practical training software for offline workpiece programming and simulation on PC; available for free download) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC controller. This compact and user-friendly entry-level system is ideal for simple milling applications. Features like easy operation, commissioning, and maintenance provide the perfect basis for equipping CNC machines. Thanks to its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling applications. With expanded hardware and software, it delivers sufficient performance for basic mold and toolmaking tasks. Compact and robust Thanks to a panel-based CNC design with few interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is ideally suited for tough environments. The compact design enables use in space-saving machines. INCLUDED: - RJ45 Ethernet port - 8.4'' color LCD with 800 x 600 resolution - Ready for remote maintenance - AST function for simple optimization of dynamic and accuracy demands - Absolute encoders / no reference run required - Improved accuracy Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weight: Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling-milling capacity: Max. cutter head size: 80 mm Max. shank cutter size: 38 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Distance vertical spindle – milling table min.: 100 mm Distance vertical spindle – milling table max.: 600 mm T-slot size: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Max. table load: 350 kg Accuracy: Blodjw Ea Dgepfx Aarjr Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Linear guideways with roller recirculation for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic way covers on all three axes · Automatic lubrication · Heavy-duty, precise milling table with five T-slots, generously dimensioned and precision-ground · Portable electronic handwheel with enabling button and emergency stop toggle switch significantly simplifies program setup · Coolant system with chip flushing system and cleaning gun · Through-spindle coolant with 20 bar pressure · Belt-type chip conveyor ensures efficient chip removal · Chip cart · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of contaminants · Work area lighting · Siemens extended warranty package including material defect liability and free OSS Plus online/on-site service · 1-year Basic maintenance contract included (Germany, Austria, Switzerland) Milling Spindle Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total power consumption: 20 kVA Milling spindle: Drive motor S1 operation: 10.5 kW Drive motor torque S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Drive motor torque S6-30% operation: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system: Coolant pump output (3 units): 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump: Cleaning pump power: 530 W Milling accuracy: Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer: Type: Double-arm gripper Number of tool positions: 24 Maximum tool diameter: 78 mm Maximum tool diameter (adjacent slots free): 120 mm Tool length: 300 mm Maximum tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel: X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive: Rapid traverse X, Y, Z: 48 m/min Drive torque (X/Y/Z): 16 Nm / 16 Nm / 20 Nm Feed force: X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Spindle speed range: Speeds*: 12,000 rpm Pneumatics: Bljdpfx Ajw Ea Avoarer Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table: Spindle-to-table distance: 100 – 650 mm Table size (L × W): 1,000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum table load: 500 kg Dimensions: Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 7.921 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 637, jarak pergerakan sumbu X: 754 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, TECHNICAL SPECIFICATIONS Number of axes: 3 Travel X: 754 mm Travel Y: 500 mm Travel Z: 500 mm Max. spindle speed: 10,000 rpm Table size length: 1,000 mm Table size width: 500 mm Control type: Heidenhain iTNC 530 Control: CNC Interface: ISO40 MACHINE DETAILS Dimensions & Weight Weight: 4,000 kg Dimensions: 2,600 mm x 2,350 mm x 2,560 mm Blodpfx Aaewyv Tmjrer Transport packages: 3 units EQUIPMENT Documentation available CE certification available

Kondisi: bekas, Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC rotary table 630 mm Spindle taper SK 40 Spindle speeds 18 - 6300 rpm DIALOG 4 control system Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Table load capacity max. 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Machine weight approx. 4.6 t Dimensions (L x W x H) 3.8 x 2.24 x 2.35 m Accessories: LNS Fox ws 2-1500 filtration system with 2 new filters in box, 2 cabinets filled with tools This machine is currently in our storage facility. Blsdpfx Aaewu Dfmorer

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 77533, panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 600 mm, kecepatan spindel (maks.): 6.300 rpm, langkah spindel: 80 mm, TECHNICAL DETAILS Travel X axis: 700 mm Travel Y axis: 500 mm Travel Z axis: 600 mm Spindle stroke: 80 mm Spindle speed: 20 - 6300 rpm Feed rate: 1 - 4000 mm/min Rapid traverse (X and Z): 12 m/min Rapid traverse (Y): 10 m/min Blsdpfxswtq T Uj Aarsr Accuracy: 0.001 mm

Kondisi: sangat baik (bekas), Year of manufacture: 2002 Overhauled: 2010 Type: CNC 607GK Control unit: Eckelmann (PC-based control) Operating hours: 14,136 h Table size: 718 x 680 mm Travel (X-Y-Z): 780 – 620 – 360 mm Spindle taper: HSK 63F Bjdpfxswhwwio Aarolr Spindle speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: spindle cooling Condition: good Suitability: The machine is particularly suitable for light machining operations, especially for aluminium and wood Power connection: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Kondisi: baik (bekas), X 800 mm Y 400 mm Bsdjwa Naaspfx Aarolr Z 500 mm