Beli Penyedot debu industri bekas (9)

Kondisi: bekas, Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Dijual penyedot debu industri profesional WIELAND IS-75 R. Perangkat telah diperiksa, berfungsi penuh, dan siap digunakan. Konstruksi logam yang kokoh dengan roda, dilengkapi dengan pegangan untuk memudahkan pemindahan. Data teknis dari pelat nama: - Produsen: WIELAND, Jerman - Model: IS-75 R - Tahun produksi: 1983 - Nomor pabrik: 996 - Daya: 5,5 kW - Sumber daya: 380 V, tiga fase - Frekuensi: 50 Hz - Arus nominal: 11 A - Kecepatan putaran: 2880 rpm - Tingkat perlindungan: IP44 - Berat: 320 kg Termasuk selang penyedot dan aksesori yang terlihat di foto: nosel, sikat, dan pipa. Perangkat ini memiliki kompartemen samping untuk menyimpan aksesori. Codpfx Aao Aibbhevjri Kondisi bekas, terdapat tanda-tanda penggunaan, goresan, dan kerusakan pada lapisan cat. Kondisi teknis: telah diperiksa dan berfungsi dengan baik.

Kondisi: baru, Tahun pembuatan: 2025, masa garansi: 12 bulan, jenis arus masuk: tiga fasa, frekuensi input: 400 Hz, berat keseluruhan: 90 kg, tegangan masuk: 380 V, VIBER-SYSTEM OS3008 – Penyedot debu industri untuk asap pengelasan – BARU Penyedot debu portabel profesional dengan kapasitas 3.000 m³/h, dirancang untuk penyedotan asap dan debu yang dihasilkan selama operasi pengelasan, pemotongan, dan penggerindaan. Ideal untuk bengkel mekanik, pabrik fabrikasi logam, industri, dan area pengelasan. SPESIFIKASI TEKNIS Model: VIBER-SYSTEM OS3008 Kapasitas aliran udara: 3.000 m³/h Daya motor: 3 kW Tekanan: 2.000 Pa Credpfx As Ahh Dceavei Catu daya: 380 V Efisiensi filtrasi yang dinyatakan: hingga 99,9% Filter: membran PTFE Luas permukaan filter: 30 m² Lengan penyedot: dapat diputar 360° Panjang lengan: 2–3 meter Diameter lengan: 160 mm Tingkat kebisingan: kurang dari 65 dB Berat: 90 kg Pembersihan filter: manual KEUNGGULAN UTAMA Penyedotan asap langsung di sumbernya Sistem filtrasi dengan efisiensi tinggi Struktur portabel dengan roda, mudah dipindahkan Lengan yang dapat diputar untuk menyesuaikan dengan berbagai area kerja Solusi praktis untuk bengkel dan lingkungan industri KONDISI: Baru

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, lebar total: 582 mm, panjang total: 1.315 mm, tinggi total: 2.010 mm, frekuensi input: 230 Hz, 2 unit penyedot debu Christ bekas. Sistem pembayaran menggunakan koin. Kondisi masih bagus. Codpfxezi Syfj Aavsri

Kondisi: sangat baik (bekas), Industrial Vacuum Cleaner Ruwac DS 1220 M-B1 EX – ATEX Explosion Hazard Zones Professional industrial vacuum cleaner from Ruwac, model DS 1220 M-B1, designed for operation in demanding industrial environments, including ATEX-rated explosion hazardous zones. — ✅ Key Information: • Manufacturer: Ruwac Industriesauger GmbH (Germany) • Model: DS 1220 M-B1 • Power Supply: 400 V (3-phase) • Power: 2.2 kW • Current: 4.6 A • Frequency: 50 Hz • Protection rating: IP54 • Weight: approx. 68 kg • EX Class: II3D – suitable for operation in dust explosion hazardous zones • Operating temperature: up to 70°C — ⚙️ Applications: • Heavy and light industry • Manufacturing plants (metal, woodworking, chemical) • Extraction of dust and contaminants • Areas requiring explosion-proof equipment (ATEX) — 🛠️ Condition: • Used equipment • Fully operational, tested • Displays typical signs of use (visible in photos) — 📦 Included: • Ruwac DS 1220 vacuum cleaner • Suction hose • Filter bag — Codpfx Aajz Sl Eyevori ⚠️ Additional Information: • Mobile unit on wheels • Robust industrial construction • German-made product – high build quality — 🚚 Shipping / Collection: Option for pallet shipping or personal collection. Transport can be arranged if required.

Kondisi: sangat baik (bekas), Professional industrial vacuum cleaner KÄRCHER IVR-L 40/12-1 designed for use in manufacturing facilities, workshops, and metalworking environments. This unit is ideal for collecting liquids (such as coolant and oil) as well as metal chips. Robust construction, a large tank, and a mobile chassis make this machine exceptionally practical for daily industrial operations. ⸻ ⚙️ Applications: • CNC machines • Metalworking (chips + emulsions) • Workshops and manufacturing • Collection of industrial liquids ⸻ 🔧 Technical Data (typical for this model): • Model: IVR-L 40/12-1 • Series: Kärcher Professional • Power supply: 230V • Tank capacity: approx. 40L • Intended use: liquids + chips • Mobile wheeled design Crsdpez Sl E Tefx Aavoi ⸻ 🛠️ Condition: • Pre-owned unit • Fully functional, tested • Very good visual condition • Normal signs of use (visible in photos) ⸻ 📦 Included in the set: • Kärcher IVR-L 40/12-1 vacuum cleaner • Suction hose • Power cable ⸻ ⭐ Advantages: ✔ Industrial Kärcher Professional quality ✔ Suitable for liquids and solid debris ✔ Perfect for workshops and manufacturing ✔ Mobile, stable on wheels ✔ High durability and reliability ⸻ 🚚 Shipping: Shipping by courier or pallet possible. Personal collection also available.

Kondisi: baru, Tahun pembuatan: 2025, lebar total: 2.100 mm, panjang total: 1.260 mm, tinggi total: 2.150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all vehicle types. The machine features a 275-liter tank, a high-pressure pump with a capacity of up to 250 l/min, and an integrated filtration system for drying. The Master Flash technology fully exploits the benefits of the hydrodynamic process and restores filter efficiency up to 99.9% compared to a new filter. It is completely safe for the monolithic structure of DPF filters. Correctly set parameters ensure thorough removal of PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals, preserving the OEM filter properties. The pump with chemical seal and electronics based on components from leading European manufacturers guarantee top quality and reliability. The machine is equipped with a system for measuring filter contamination (backpressure measurement) and an integrated drying system that reaches temperatures from 70 to 130 degrees Celsius. The advanced filtration system with a pre-filter significantly extends the service life of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5, carbon deposits, oil, cerium, and heavy metals without mechanical intervention in the filter structure, restoring factory performance up to 99.9%. Credpfx Ajgllkajavsi TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Maximum power: 12 kW * Frequency: 50 Hz * Water inlet: 1/2” * Water outlet: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: fluid level, fluid and air temperature, pressure/flow, door opening, phase failure and phase sequence • System for measuring filter contamination • Chamber made from stainless steel AISI 316 • Advanced 4-stage fluid filtration • Two heating elements • Integrated drying system with a temperature of 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote maintenance • Adapter set for connecting DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapters • Starter kit of consumables (complete filter set + 2L XPOWER DPF Cleaner solution) • Extended 12-month manufacturer’s warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS – CONTACT US FOR FURTHER INFORMATION.

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for the regeneration of DPF/FAP/GPF filters and catalytic converters, designed for passenger cars and light commercial vehicles. Features include a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The interior of the machine is constructed from stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed circuit using a hydrodynamic method. The device allows measurement of filter contamination both before and after regeneration, with results displayed in mbar. It is equipped with an integrated drying system capable of reaching temperatures up to 100°C. After regeneration, a final backpressure measurement is performed, which is provided to the customer as a printout. This comprehensive cleaning process can restore the factory parameters of the filter by up to 99.9%. Components from leading European manufacturers have been used in the construction of the machine, ensuring top quality and reliability. Cedpogllwisfx Aavsri EQUIPMENT: • 7-inch color touchscreen • Sensors: liquid level, fluid and air temperature, flow pressure, chamber door opening • Safety features: emergency stop switch, limit switch for chamber door, phase failure and phase sequence monitoring • System for measuring filter contamination • Chamber made of AISI 316 stainless steel • Advanced 4-stage liquid filtration system • Integrated drying system with stepless adjustment in the temperature range of 70 to 100°C • Cooling for the drying system • Integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • Set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • Starter kit for consumables (one filter set + 2L XTON DPF cleaning fluid) • Liquid tank with a volume of up to 185 liters • Extended manufacturer’s warranty for 12 months (optionally 24 or 36 months) ADDITIONAL OPTIONS: • Automatic filter cleaning on both sides • Separate fluid circuit with an additional pump • Thermal insulation for the fluid tank • Automatic fluid refilling • Automatic dosing of cleaning agents • Quick-X filter mounting system • EURO5 and EURO6 adapters

Kondisi: baru, Tahun pembuatan: 2025, DPF HEATER PRO PLUS™ is a device for drying all types of diesel particulate filters (DPF) and catalytic converters, constructed entirely from AISI 304 stainless steel and acid-resistant AISI 316 steel. It is equipped with an integrated measurement system and a drying system operating at temperatures of up to 130°C, utilizing a side channel blower. An integrated thermal printer enables the printing of filter contamination measurements both before and after regeneration. This device is an excellent supplement to DPF cleaning machines that lack a built-in drying system. ADVANTAGES OF USING THE DPF HEATER PRO: - Compatible with any regeneration equipment - Optimization of the filter regeneration process - Low drying costs - Contamination measuring system – test results confirmed with printout - Quick-lock filter system with Camlock closure - Adapters for passenger cars and commercial vehicles/trucks - Fully automatic drying process TECHNICAL DATA: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Power supply: 3 x 400 V - Maximum output: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable from 70°C to 130°C - Safety features: pressure sensor, emergency stop switch Csdpfoglpywsx Aaveri - Declaration of conformity: CE

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH STANDARD™ is a compact device for regenerating diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The device comes with adapters that allow connection to all passenger car DPF filters. To further increase regeneration efficiency, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a special offer price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum output: 6 kW - Frequency: 50 Hz - Adjustable fluid temperature: 30°C to 100°C - Pump performance: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature controller - Programmable automatic cycle controller - 150-liter water tank - Water pump with capacity up to 133 L/min - Built-in pressure regulator (0-8 bar) - Integrated filtration system Crjdogllxgspfx Aavsi - Adapters for DPF filters When you purchase our machine, you receive a starter package to help you get started right away. The package includes: - A set of 3 filter cartridges + 3 replacement filters - XPOWER DPF Cleaner chemical kit (2 x 1 L)