Beli Mesin erosi lainnya bekas (26)

Kondisi: siap digunakan (bekas), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel distance X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm–0.3mm, max. wire feed: 15m/min, U/V travel distance: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threading AT. Documentation available. On-site inspection possible. Kjdpfevb Hbrex Aa Nodg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, FLAIG Pelat Penjepit Magnet Permanen 300 x 150 x 51 mm, Tipe PMSF/PMNM, dengan pembagian kutub melintang paling halus, sistem magnet dengan magnet neodymium, pembagian kutub halus, kunci yang dapat dilepas, daya tahan maksimum 100 N/cm², tinggi medan magnet 5 mm, ketebalan plat kutub yang dapat aus 6 mm, berat 19 kg, untuk penjepitan benda kerja berdinding tipis terkecil saat penggerindaan dan pemotongan EDM, sangat cocok untuk sistem palet karena bobot sendiri yang sangat rendah. Kedpfxex Tqfkj Aa Nodg

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: M1042, translation-001 Kodpfx Aoxx Nkyja Nodg

Tahun pembuatan: 1995, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 230 mm, panjang meja: 650 mm, lebar meja: 550 mm, nomor mesin/kendaraan: MB-9501B1, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin dilelang karena penutupan usaha. Penawaran mengikat untuk pengambilan tepat waktu antara 26.01.2026 dan 29.01.2026! SPESIFIKASI TEKNIS Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 300 mm Perjalanan sumbu Z: 230 mm Kodpfx Aoxqqcuoa Nsdg Ukuran meja: 650 x 550 mm RINCIAN MESIN Kontrol: MULTITRON PS 1800 Dimensi & Berat Dimensi (P x L x T): 2.400 x 2.000 x 2.400 mm Berat: 2.000 kg

Kondisi: bekas, Tahun pembuatan: 2015, Merek: EXERON, Tipe: S 306 MF20/30, Tahun pembuatan: 2015, No. seri: 306-0102, Kontrol: pabrikan Exeron, tipe MF20/30, perjalanan sumbu: 1.200 x 750 x 500 mm, meja penjepit benda kerja: 1.500 x 1.200 mm, ukuran tangki: 1.550 x 1.250 mm, tinggi pengisian: 550 mm, jarak meja/penjepit elektroda: 300 - 800 mm, berat benda kerja maks.: 4.000 kg, penggaris pengukur pada sumbu X/Y/Z, sumbu C dengan pengukuran langsung, kecepatan angkat 7,5 m/menit, pengganti alat 8 posisi, instalasi filter celah, lemari kontrol, pendingin, sistem pemadam CO² Kjdpfox Dahasx Aa Nedg Mesin ini merupakan bagian dari lelang online.

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: M755, tech-data-001 Kdsdpfx Aasxwmiko Nsg

Tahun pembuatan: 1989, Kondisi: bekas, Erodiermaschine, gebraucht Kodpfxeit Rqio Aa Nsdg Baujahr: 1989 Für weitere Informationen und Bilder kontaktieren Sie uns bitte per E-Mail unter mail(at) oder

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), de-2024-06-18-01 Ksdpfxex Hz She Aa Njdg

Tahun pembuatan: 2017, Kondisi: bekas, Disc-type EDM machine for complete machining of rotationally symmetric workpieces with cutting edges made from ultra-hard cutting materials. The workpieces are held in a cantilevered (vertically suspended) position. Accessories: - Full enclosure - External PC including CAD/CAM and ExLevel Pro software - Software package with additional functions for metalworking tools - Disc changer for up to 6 EDM/grinding discs - Adapter for A-axis with HSK 63-A-E - Coolant system with pump & cooling unit - Automatic central lubrication - Automatic fire extinguishing system - Automatic closure flap - Glass linear scales on X, Y & Z axes - Mechanical mist separator N280 - 3 grinding wheel changing elements - HSK63A test arbor Optional: Also available with workpiece magazine! Technical data: - Workpiece outer diameter: max. 320 mm - Workpiece length: max. 250 mm - Tool outer diameter: max. 200 mm Ksdpfx Asxy Ry Sea Nodg - Bore diameter: max. 60 mm - Travel X1: 520 mm - Travel Y1: 970 mm - Travel Z1: 420 mm - Rotary range A1 axis: 360° - Rotary range B1 axis: +/-20° - Rotary range E1 axis: 210° - Grinding spindle speed: stepless, 0 – 4,500 rpm (torque 6Nm) - Connected load: approx. 8.7 kVA / 6.8 kW - Weight: approx. 7,100 kg - Dimensions (W x D x H): 4,012 x 2,889 x 2,611 mm - Colour: RAL 7047 telegrey 4 / RAL 7045 telegrey 1

Tahun pembuatan: 2015, Kondisi: bekas, Disk erosion machine for complete machining of rotationally symmetric workpieces with cutting edges made from ultra-hard cutting materials. The workpieces are mounted cantilevered (hanging vertically). Accessories: - Full enclosure - Software for woodworking tools - Software for P-system peel milling cutters - Software for scoring saw blades / radius cutters - Software for 360° path program - Software for 360° peel milling cutters - Workpiece magazine N250 (pallet magazine for up to 28 workpieces) - Disk changer for up to 6 erosion / grinding wheels - A-axis adaptation for HSK 63-F - Coolant system with pump and cooling unit - Automatic central lubrication - Automatic fire extinguishing system - Automatic closing flap - Gripper fingers for workpiece automation - 4 workpiece holders for workpiece magazine - 1 change element with flushing set - Mechanical mist extractor N183 - HSK63F test arbor Workpiece outer diameter max.: 320 mm Kjdpfx Aajxy Ryrs Nodg Workpiece length max.: 250 mm Bore diameter max.: 60 mm Travel X1: 520 mm Travel Y1: 970 mm Travel Z1: 420 mm A1-axis swivel range: 360° B1-axis swivel range: +/-20° E1-axis swivel range: 210° Grinding spindle speed stepless: 0 - 4500 rpm Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz) Weight approx.: 7100 kg Dimensions (L x W x H): 4012 x 2889 x 2611 mm Color: RAL 7047 telegrey 4 / RAL 7045 telegrey 1

Tahun pembuatan: 2004, Kondisi: perlu perbaikan (bekas), Sumbu X: 800 mm // 900 mm/menit Sumbu Y: 600 mm // 900 mm/menit Sumbu Z: 400 mm // 900 mm/menit U/V: 60 mm Benda kerja: X: 1300 mm Benda kerja: Y: 910 mm Benda kerja: Z: 400 mm Beban maksimum meja: 2300 kg Koneksi listrik utama: 400 V / 50 Hz / 3P Kebutuhan daya total: 10 kVA Tekanan udara: 6 bar Tangki dielektrik: 250 liter Spesifikasi teknis Gerakan Z: 400 mm Gerakan X: 800 mm Gerakan Y: 600 mm Kdodpfx Asx Hxikea Njg Berat sekitar 4700 kg Dimensi di lokasi (P x L x T): 1950 x 2550 x 2000 mm Dilengkapi dengan buku manual dan dokumentasi. Dalam kondisi tidak berfungsi; kemungkinan masalah pada catu daya. Kondisi mekanis sangat baik.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), 1 Kjdpfx Asx Dcarsa Nsdg

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), verfahrweg-xyz-beschreibung Kdedpexwywuefx Aa Neg

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), VerfahrwegXY-Z450mm-350mm-400mm-Eilgang900mm-min-Werkstueckdimen sionen1050-650-250mm Kodpfx Aaexwyv Re Njdg

Tahun pembuatan: 2005, Kondisi: bekas, Universal machine for eroding, grinding and polishing various PCD tools up to 400 mm diameter and 400 mm length in production. Accessories: - Full enclosure - Path curve management software - P-System software for helical cutters - End mill software (207/208) - Software for disc-shaped workpieces, face side (221/222/223/224) - Software for profiled workpieces (233/234/239/240) - Software for milling cutters, profiled milling cutters (255/256/257/258/260/261/262/263) - Software for disc-shaped workpieces (264/265) - Software for shank and joining cutters (267/268/277/278) - Software for stepped tools (271) - Software for slot saws (299) - Software for flat tooth saws (301) - Software for single-sided bevel saws (302/303) - Software for alternate tooth saws (304) - Software for trapezoidal tooth saws (309) - Software for flat-roof tooth saws (310) - Software for flat-trapezoidal tooth saws (311) - Software for alternate tooth saws with bevel (312) - Software for shank and joining cutters (7/8) - Software for profiled shank and joining cutters (33/34) - Software for milling cutters, profiled milling cutters (53/54/55/56/57/58) - Software for disc-shaped workpieces (64/65) - Software for shank and joining cutters (67/68/77/78) - Compensation software (90) - Software for flat tooth saws (101) - Software for single-sided bevel saws (102/103) - Software for alternate tooth saws (104) - Software for trapezoidal tooth saws (109) - Software for flat-roof tooth saws (110) Kdjdpfow S I Dgsx Aa Njg - Software for flat-trapezoidal tooth saws (111) - Software for alternate tooth saws with bevel (112) - Software for polishing profiled milling cutters (757/758/760/761) - Dielectric filter system - Automatic fire extinguishing system to DIN 14497 - Standard programs for measuring, eroding, etc. - Software program for chamfering workpiece cutting edges, automatic diagnostics (machine operation status program with text output on screen) - Software for helical cutters

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1270, Tahun pembuatan: 1999, DISINTEGRATOR UNTUK MENGHAPUS (EDM) MATA BOR DAN PENGETAP YANG PATAH - Tahun pembuatan: 1999 - Untuk pengetap M1,6 hingga M38 - Untuk mata bor Ø1 hingga Ø38 - 1x collet Ø4 mm - 1x collet Ø4,5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V - 10 kVA - 15 A Kdjdpfx Aajxniv Uo Neg - 50 Hz - No. Seri 1270

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Length: 3,100 mm; width: 2,350 mm; height: 2,474 mm; weight: 4.8 t. Supplied with documentation and filtration unit, without accessories. Operating hours unknown. An on-site inspection is possible; the machine has not been in operation for several years, and there is no personnel available on site to operate the machine. Kjdpep R R Idjfx Aa Nedg

Tahun pembuatan: 1991, Kondisi: baik (bekas), Description: - Travel (X x Y x Z): 200 x 300 x 300 mm - Table size: 250 x 350 mm - Max. workpiece weight: 100 kg - Max. electrode diameter: approx. 0.3 – 3.0 mm Kodpegktifsfx Aa Nodg - Footprint: 860 x 830 x 1990 mm - Weight: 500 kg

Tahun pembuatan: 1985, Kondisi: baik (bekas), Beck slide travel: 240 mm Kdodpfx Aasdy Dw Eo Neg Leaf spring travel: 100 mm Table dimensions: 350 x 230 mm Longitudinal travel (X): 200 mm Cross travel (Y): 120 mm Maximum table load: 100 kg Work container dimensions: 520 x 350 mm Dielectric reserve capacity: 68 liters Hydraulic tank capacity: 5.6 liters Dielectric pump flow: 140 l/min Generator weight (P25): 125 kg Power requirements: - Machine: 1 kVA - Generator: 2.2 kVA Hydraulic pump pressure: 20 bar(s) Weight with reservoir tank: 460 kg

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Tersedia dua mesin Erosi Listrik (EDM) DM-323. Jumlah jam operasi mesin 1/2: 12.134,51 / 32.704,5 jam. Manual operasi dan diagram kelistrikan tersedia. Pemeriksaan di lokasi dimungkinkan. Kodpfxjw Tc R Do Aa Nsdg

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), de__mit_dielektrikum_vollautomatisches_wasseraufbereitungssystem Kdedpfxow S Tygo Aa Nog

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), de-to-hu Kdedew Sxx Ispfx Aa Njg

Kondisi: siap digunakan (bekas), Two identical machines are available. Connected load: 32 kW, length: 3,500 mm, width: 2,400 mm, height: 2,400 mm, weight: 3 t. An on-site inspection is possible. Kdjdpouyk Rlofx Aa Neg

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Internal working tank dimensions: 860mm/620mm/360mm, rotation: 60 rpm, capacity: 415l, filter quality: 3μm-5μm. Machine dimensions X/Y/Z: 2689mm/1855mm/2593mm, net weight: approx. 3200kg, filled weight: approx. 4200kg, control system: AgieVision. Documentation available. Kjdpfjr Nd Enjx Aa Njdg

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work tank dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool stations: 28. Machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. Inspection on site is possible. Kodpfx Aaovc Ha Rj Nsdg