Beli mesin pemotong bekas (11)

Kondisi: sangat baik (bekas), Precision ejector pin cutting and end-face grinding machine Grinder features: A precision device enabling semi-automatic, custom-length cutting of ejector pins and end-face grinding in a single clamping During operation, the grinder can be adjusted The belt tension can be regulated and automatically controlled (the greater the resistance, the tighter the belt) Grinder for cutting ejector pins and end-face grinding Grinder for cutting ejector pins and end-face grinding Manufacturer code 100 Machine specifications: Motor power: 0.735 kW Maximum speed: 3,600 rpm Diameter range: ⌀1-25 mm Gsdpsvyuw Sjfx Adtstt Maximum length: 300 mm (optional: 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions (LxWxH): 430x360x500 mm Weight: 109 kg YouTube video link:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Tinggi total: 1350 mm Lebar dengan kotak kontrol: 850 mm Kedalaman: 1420 mm Daya motor: 1,5 / 3,0 kW Diameter cakram: 200 mm Godpfx Ajx Tpbwodtott Kapasitas pemotongan hingga: 40 mm

Kondisi: baik (bekas), Double bench grinder, double grinding machine, pedestal grinding machine, pedestal bench grinder - Motor output: 0.5 kW Gtedpfx Aob A Rctodtet - Speed: 3200/5200 rpm - Grinding wheels: max. Ø 180 mm - Operating voltage: 380 Volt - Dimensions: 500/500/H1550 mm - Weight: 170 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, lebar total: 360 mm, panjang total: 1.020 mm, tinggi total: 500 mm, jenis arus masuk: AC (pendingin udara), diameter benda kerja (maks.): 25 mm, berat keseluruhan: 92 kg, tegangan masuk: 400 V, Clamping, Cutting, and Face Grinding in a Single Operation The machine features two parallel-operating grinding spindles: one for cutoff operations and one for precision face finishing to final size. Gtodoid Iymspfx Adtjt The desired workpiece length is set on the scale to an accuracy of 1/100 mm. Open prism clamp: Move center lever to the right and insert workpiece Close prism clamp: Move lever to the left Cutting: Move left lever upwards Finishing: Move left lever downwards Open prism clamp: Return center lever to the middle and right—remove finished workpiece. The grinding wheel can be dressed and adjusted at any time without altering the set dimension. Equipped with motor protection, safety cover switch, and restart protection. Operation without clamping hand: The machine is supplied with two stop rulers (300 & 600mm): Max. finished workpiece length: 300mm or 600mm Min. finished workpiece length: 54mm Workpiece diameter: Ø1-25mm Operation with clamping hand (not included): Max. finished workpiece length: 60mm Min. finished workpiece length: 12.5mm Workpiece diameter: Ø1-10mm Ejector with cylindrical head: Max. size 6 Max. workpiece oversize before machining: 195mm Length tolerance: +/-0.01mm Squareness: +/-0.01mm Weight: 92kg Dimensions without scale (W x D x H): 430 x 360 x 500mm Dimensions with scale (W x D x H): 1020 x 360 x 500mm Height with open cover: 950mm Cutoff wheel, fabricless: SGA60P6BR1, Ø180x1xØ31.75mm Cup wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, stock machine, 6-month warranty. Includes the following accessories: • 1 pc. cutoff wheel SGA60P6BR1 with flange, pre-mounted • 1 pc. cup wheel PA46 with flange, pre-mounted • 1 pc. diamond dresser, pre-mounted • 1 pc. belt, pre-mounted • 2 pcs. Y-face spanner wrenches • 1 pc. each Allen key 3mm, 5mm, 3/16'' • 1 pc. pin wrench 6mm • 1 pc. scale 300mm • 1 pc. scale 600mm • 1 pc. micrometer screw with scale sleeve • 1 pc. cleaning brush • 1 pc. lever • 1 pc. German-language operating manual • 1 pc. wooden transport box

Kondisi: bekas, Tahun pembuatan: 2018, Maximum diameter: . mm Minimum diameter: . mm Maximum cut length: . mm Gtsdpfxewhqy Ds Adtjt Left: Wire Right: Stone Price: €200 net +++++ Please note that the machine is dismantled and ready for loading. For this reason, it is not possible to demonstrate it under power or to produce a video. Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, it is not possible to send additional images. +++++

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, The Function The TAM 25/600 separates and cuts ejector pins, ejector sleeves, and punches quickly and precisely. Workpieces with diameters from 0.5 to 25 mm, made of tool steel or carbide, can be processed. Simply insert the workpiece into the quick-clamping prism, set the required finished length, and separate and cut to length in one operation. On request, an additional clamp for extremely thin, short, or stepped pins is available. Your advantages: • User-friendly quick-clamping system • Fast insertion and removal of workpieces • Separation and cutting in a single operation • Additional clamp for thin, short, and stepped pins After cutting, the work table is locked in the end position, the length is precisely measured, and the piece is ground to the final dimension using the integrated micrometer feed. Wear to the cup wheel is compensated by advancing the grinding spindle. The integrated diamond ensures automatic dressing of the wheel. CBN or diamond wheels are available as optional accessories for the TAM 25/600. Your advantages: • Precise positioning of the workpiece via micrometer screw • Integrated dressing diamond for the cup wheel • Integrated coolant system to prevent overheating of the workpiece • Advancing grinding spindle ensures the cutting edge of the cup wheel remains at zero position Precision Drive Motor: 1.1 kW Cut-off Spindle Speed: 11,000 rpm Grinding Spindle Speed: 4,400 rpm Workpiece Diameter: 0.5 – 25 mm Workpiece Length (with stop): max. 600 mm Cut-off Wheel: 125 x 1.0 x 20 mm Grinding Wheel: 100 x 50 x 20 mm Footprint: 700 x 500 mm Weight (net): 135 kg Gtedjfig I Nspfx Adtet The machine is in like-new condition, both technically and visually. Any parts not 100% functional have been replaced. All bearings and screws have been replaced and all components newly painted or blackened. Delivery time: 3 months.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Precision cutting-to-length machine Manufacturer: DEGEN Model: TAM 25/600 Gedshfwfaspfx Adtstt Year of manufacture: 1992 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Machine no.: 1017 with warranty Geometric inspection with test report Accessories: - Coolant system - Operating manual - used, as seen -

Kondisi: bekas, Tahun pembuatan: 2009, Suitable for the automatic cutting and flat grinding of carbide and HSS bars with high precision for standard and custom solutions. Accessories: - Full enclosure - Automatic feed (hydro-pneumatic) - Rapid traverse adjustable via touch panel - Automatic fire extinguishing system Kraft & Bauer FB 703 - Freely programmable length positioning - Siemens Simatic HMI control system - Prepared for connection to a central coolant unit Gtsdowd Ha Sjpfx Adtet Workpiece diameter with loading magazine: 3 – 20 mm Workpiece length without loading magazine: 3 – 32 mm Workpiece length with loading magazine: 3 – 310 mm Workpiece length without loading magazine: 1 – 450 mm Grinding spindle speed: 2,000 rpm Weight: approx. 1,700 kg Dimensions (L x W x H): 1,900 x 1,200 x 2,400 mm Colour: grey

Kondisi: bekas, Tahun pembuatan: 1986, Grinding wheel diameter 300 mm Gtedpfx Aot Hwzvjdtjt Table length 0 mm Table width mm Total power requirement 11 kW Machine weight approx. t Space requirement approx. m Cut-off machine for hard materials Cut-off machine, manual lever, coolant system, 11 kW

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, lebar total: 360 mm, panjang total: 820 mm, tinggi total: 500 mm, jenis arus masuk: AC (pendingin udara), diameter benda kerja (maks.): 25 mm, berat keseluruhan: 92 kg, tegangan masuk: 400 V, This LY300 cross- and longitudinal grinding machine is used but has only seen occasional use. Its condition is very good, with only minor paint damage and a scratched machine cover showing its age. For safety, the machine features a cover interlock switch that automatically shuts off the machine when the cover is opened. A restart protection device prevents unexpected start-up. A clamping handle for machining short workpieces is included with this machine. Consumables such as cutoff wheels and cup wheels can be offered additionally. Application: Rod-shaped workpieces can be both cut to length and face-ground in a single operation. Ideal for manufacturing ejector pins. The machine is equipped with two parallel grinding spindles: one for cutting and one for precision face grinding to final size. The desired workpiece length is set to an accuracy of 0.01 mm using the scale. Workpiece length without clamping handle: 54 - 300 mm Workpiece diameter: Ø1-25 mm Workpiece length with clamping handle (included in accessories): 12.5 - 60 mm Workpiece diameter: Ø1-10 mm Ejectors with cylindrical head: max. size 6 Max. workpiece allowance before machining: 195 mm Length tolerance: +/-0.01 mm Gtsdpfxjxwp A Hs Adtot Squareness: +/-0.01 mm Weight: 92 kg Dimensions without scale (WxDxH): 430x360x500 mm Dimensions with scale (WxDxH): 820x360x500 mm Height with open cover: 950 mm Bondless cutoff wheel: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Includes the following accessories: • 1 pc. cutoff wheel SGA60P6BR1 with flange, mounted • 1 pc. cup wheel PA46 with flange, mounted • 1 pc. dressing diamond, mounted • 2 pcs. Y-face spanners • 1 pc. pin spanner 6 mm • 1 pc. scale 300 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. lever • 1 pc. operating manual, German Operating procedure: Open prism clamp: move lever in the middle to the right and insert workpiece Close prism clamp: move lever to the left Cutting: move lever up (left) Face grinding: move lever down (left) Open prism clamp: move lever to the middle and to the right; remove finished workpiece. The grinding wheel can be adjusted and dressed at any time without loss of the set dimension.

Kondisi: baru, Short and longitudinal grinding machine Brand: HERZOG Model: LY 600 Gsdped Idb Isfx Adtett 400V version Length tolerance: ± 0.01 mm Squareness: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup wheel and cut-off wheel - Operating manual