Beli Mesin pemotong plasma bekas (150)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, ideally suited for precision cutting tasks. Take advantage of this opportunity to purchase the VOORTMAN V304 plasma cutting machine. Contact us for further details. Pedjx D I S Hjpfx Abuogg Machine Benefits Quality Machine Benefits • The plasma 3D bevel unit provides a maximum acceleration of 2000 mm/s² on the Z-axis, a maximum speed of 365 mm/s on the Z-axis, bevel angles of ±50° depending on torch type, a positioning accuracy of ±0.5°, and supports material thicknesses from 6–50 mm. • The oxy-fuel cutting device is a nozzle-mixing unit equipped with a solenoid valve and flashback arrestor for gas supply, automatic external ignition, a maximum thickness of 200 mm for 1 or 2 parts, 125 mm for 3 parts, 100 mm for 4 parts, 75 mm for 5 parts, and 60 mm for 6 parts. It uses acetylene as the standard cutting gas, with propane and O₂ optional. • The Voortman height control features a maximum acceleration of 2000 mm/s² on the Z-axis and a maximum speed of 365 mm/s on the Z-axis. • Voltage stabilizer: not included • Ambient temperature: 0–35°C, max. 95% relative humidity • Working height: 705 mm (±20 mm) Technical Machine Benefits • Output per servo drive: 26 kW • Acceleration: 1000 mm/s² • Maximum piercing capacity: 40 mm • Dross-free cutting (maximum): 35 mm • Marking lines: yes, with the same consumables • Plasma gas (mild steel): Cutting: O₂ (99.9% pure, clean, dry, oil-free); Marking: argon gas or O₂/air (99.9% pure, clean, dry, oil-free) • Shielding gas (mild steel): yes • Automatic gas console: yes • The cutting speed for mild steel is approximately 3700 mm/min at 90A for 6 mm, 3600 mm/min at 200A for 12 mm, 1600 mm/min at 300A for 25 mm, 720 mm/min at 300A for 40 mm, 400 mm/min at 300A for 50 mm, and 100 mm/min at 300A for 80 mm. • Earthing: maximum 6 m from the machine. Earthing of AC, PE, and service must comply with local and national regulations. Additional Information Machine still under power.

Kondisi: bekas, Tahun pembuatan: 2023, Mesin Pemotong Plasma CNC Produsen: Microstep Tipe: MasterCut Compact 3001.15P Tahun pembuatan: 2023 Kontrol CNC Area kerja: 1.500 x 3.000 mm Pgedpfx Aoydibqsbuog 1 x torch plasma dengan sumber daya Hypertherm Powermax 45 Sistem plasma udara Unit filter Aigner Tersedia: Maret 2026 27126

Kondisi: baik (bekas), Tahun pembuatan: 2011, en-GB Pedpfxsydc I Ro Abusgg

Kondisi: bekas, Tahun pembuatan: 2008, Mesin pemotong plasma CNC tipe portal dengan pemotong autogen Produsen: ESAB Tipe: SXE P1 4500 Tahun pembuatan: 2008 Kontrol CNC 3 obor autogen 1 obor plasma dengan sumber daya Kjellberg HiFocus 160i Tanpa meja dan filter! 25126 Pgsdpfx Ajyc Nclebujg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jumlah sumbu: 3, Mesin pemotong plasma 3-sumbu MicroStep 3001.15P/ME ini diproduksi pada tahun 2021. Mesin ini memiliki area kerja sebesar 1500x3000 mm, sangat ideal untuk tugas pemotongan yang presisi dan berskala besar. Jika Anda mencari solusi pemotongan berkualitas tinggi, pertimbangkan mesin MicroStep 3001.15P/ME yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Area kerja: 1500 x 3000 mm Pgedpjycvq Ajfx Abuog

Kondisi: baik (bekas), Tahun pembuatan: 2007, Mesin Pemotong Plasma CNC Portal Produsen: Microstep Tipe: SPL-P 12001.20 Tahun Pembuatan: 2007 Kontrol CNC Pgedpfxjuv Hkgj Abueg 1 torch plasma dengan sumber daya Kjellberg HiFocus 160i Meja hisap: 2 x 12 m Unit filter: Donaldson Torit DCE

Kondisi: bekas, Tahun pembuatan: 2023, CNC gantry plasma cutting machine with rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm “MasterCut” plasma rotator with fully automatic support ACTG automatic calibration unit for the bevel unit Kemper extraction system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut programming for bevel cuts Other technical data: MicroStep machine control with MMI console and 24” touchscreen Pgjdjxu U Ddepfx Abueg iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD operating unit on the gantry Laser pointer with automatic offset transfer USB 3.0 interfaces for storage devices Remote maintenance module MicroStep RemoteDiagnostics Grate cover in the cutting table Reinforced design of the cutting table Connection of the fine plasma source to CNC control Control of the automatic gas console Electrical and mechanical torch height sensing LED signal tower on the gantry bridge (2 colors) Tactile shut-off device for guide rails Light barrier protection (collision protection) of the gantry bridge via emergency stop Smart Z Movement ACTG Calibration Report Fully automatic oxy-fuel torch support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection

Kondisi: bekas, Tahun pembuatan: 2017, Mesin Pemotong Plasma CNC tipe portal (unit chamfer) dengan obor autogen Produsen: Zinser Tipe: 2425-I/3600 Tahun pembuatan: 2017 Kontrol CNC: 5010 Panjang lintasan: 11 m Meja pemotongan dengan sistem konveyor getar, termasuk sistem ekstraksi asap Dimensi: 2.000 x 8.000 mm 1 obor plasma dengan sumber daya Hypertherm XPR300 konsol gas otomatis Pjdpfx Abew Rpvbsuogg termasuk unit chamfer plasma berputar otomatis Bevel System 2015/350 1 obor autogen Unit filter Downflow 3DFP9-SP Daya: 9 kW Dioda laser 21126ä

Kondisi: baik (bekas), Tahun pembuatan: 2018, Burning-Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret tool positions: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring marking: 5 to 40 mm Minimum sheet size: 1,500 x 300 mm (750 x 400 mm with restriction) Minimum finished part size: 80 x 80 mm Maximum sheet weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or sheets: 4,000 x 2,000 mm Datum cross transfer conveyor Carriages: 2 clamps NC feed carriage, laterally positioned 4 pneumatic clamps (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table with chute into material collection container for unloading small parts. Filter unit incl. piping High performance suitable for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and plate material. Software options for milling and scribing LANTEK license ä21126 Availability: immediate! Podpfx Asvzrczjbusgg

Kondisi: baik (bekas), Tahun pembuatan: 2012, Mesin Potong Plasma CNC Portal Pabrikan: Microstep Podpfxou U Hm Ao Abuogg Tipe: SPL PAA 9001.25 Tahun pembuatan: 2012 Kontrol CNC Area kerja: 2.500 x 9.000 mm 1 torch plasma dengan sumber daya Kjellberg HiFocus 280i 2 torch cutting autogen untuk propana Meja pengumpan bergetar Beuting Sistem filter Donaldson DFPRO12 untuk pemasangan luar ruangan

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin Pemotong Plasma CNC Portal Produsen: Messer Tipe: Multitherm 4000 Kontrol CNC: Global Control Plus Tahun Pembuatan: 2008 Retrofit: 2019 Meja hisap: 2.000 x 3.000 mm 1 burner autogen ALFA 1 burner plasma Psdsiff Daspfx Abuegg Sumber daya Kjellberg HiFocus 280i Sistem filter Z-Line 9 ZDC Teknisi sendiri tersedia untuk pemasangan, commissioning, dan pelatihan! Semua suku cadang tersedia di gudang

Kondisi: baik (bekas), Tahun pembuatan: 2000, Mesin Pemotong Plasma CNC Portal Produsen: Messer Tipe: Omnimat L5000 Tahun Pembuatan: 2000 Kontrol CNC: Fanuc Area kerja: 3000 x 6000 mm Perpanjangan dimungkinkan 1 obor plasma dengan sumber daya Hypertherm HT2000 3 obor autogen tanpa meja Pedpfx Abjhwtn Iousgg tanpa filter 21126ä

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, en Pgodpfx Abex D D Nheuog

Kondisi: bekas, Tahun pembuatan: 2020, Mesin Pemotong Plasma CNC Portal dengan Agregat Chamfer Skew Rotator Bevel Produsen: Messer Tipe: Multitherm 4000 Tahun pembuatan: 2020 Kontrol CNC: Global Control Plus Area kerja: 3 x 12 m Lebar rel: 4.000 mm 1 Torch Oksigen ALFA 1 Torch Plasma dengan agregat Chamfer Skew Rotator Bevel Sumber daya Hypertherm XPR300 Ketebalan Pemotongan: Pgodpox Dlwmefx Abueg 50 mm piercing 80 mm pemotongan terpisah Meja hisap Beuting tanpa unit filter Perangkat lunak: Omniwin dengan bevel ä21126

Kondisi: baik (bekas), Tahun pembuatan: 2006, Mesin Pemotong CNC Portal Produsen: Messer Tipe: Easytherm 4600 Tahun pembuatan: 2006 Kontrol: Global Control Area kerja: 3 x 9 m Tanpa meja!! Meja dapat ditawarkan sesuai permintaan! Panjang lintasan: 12 m dengan balok HEB 1 Obor autogen ALFA 1 Obor plasma dengan sumber listrik Kjellberg 160i plus Termasuk penandaan Sistem filter Torit Teknisi sendiri untuk pemasangan, commissioning, dan pelatihan tersedia! Pgodpeivz A Rofx Abuog Semua suku cadang tersedia di stok.

Kondisi: bekas, Tahun pembuatan: 2022, Mesin Pemotong Plasma Produsen: Swift Cut Tipe: Pro 3000 Tahun Pembuatan: 2022 Perjalanan sumbu X/Y: 3.000 x 1.500 mm Sumber daya: Hypertherm Powermax65 SYNC Ketebalan plat baja karbon maks.: 16 mm Ketebalan plat baja tahan karat maks.: 12 mm Podpfxeyazzbj Abuogg Ketebalan plat aluminium maks.: 12 mm Panjang meja: 3.000 mm Lebar kerja: 1.500 mm Lebar meja: 1.500 mm 20126

Kondisi: bekas, Tahun pembuatan: 2019, Mesin Pemotong Plasma Portal CNC Produsen: Microstep Tipe: MG 4501.20 BkP Tahun Pembuatan: 2019 Kontrol CNC Area kerja: 2.000 x 4.500 mm 1 x obor plasma 2D dengan sumber daya Hypertherm XPR300 inkl. konsol gas Optimix 1 x spindle bor 26 kW hingga diameter 40 mm, termasuk penukar alat 8 posisi 1 x persiapan untuk penambahan rotator (untuk pemotongan serong) 1 x program nesting pada kontrol CNC Podpfxoyay H Ae Abuegg 20126 Ketersediaan: Mei 2026

Kondisi: baru, Tahun pembuatan: 2024, Condition: new Year of manufacture: 2024 Stock number: 2517 Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €36,720 Leasing rate: €701.35 In stock: 1 Working area: 1500 x 3000 mm Plasma power source: Hypertherm Powermax 125 Max. sheet thickness - mild steel: 25 mm Max. sheet thickness for pierce cutting - mild steel: 25 mm Max. sheet thickness for separation cut: 57 mm Recommended sheet thickness (unalloyed steel): 25 mm Current: 125 A Rapid traverse speed: 24 m/min Psdpfxswva Iao Abusgg Repeatability: 0.1 mm Max. table load: 400 kg/m² Length: 3560 mm Width: 1960 mm Height: 1500 mm Weight: 650 kg DEMONSTRATION MACHINE Compressed air operated plasma source: HYPERTHERM Powermax 125 CNC workbench software (external PC not included) Automatic height control via arc voltage Setup laser Precision linear profile rail guidance (HiWin) Backlash-free HTD timing belt Driven by stepper motors Robust frame construction Individually replaceable slat support Water tray as spark catcher Manual controls for convenient positioning and setup at the workpiece Operating manual in GERMAN Equipment in accordance with CE regulations INCLUDING THE FOLLOWING OPTION: Extraction bridge (prepared for extraction connection DN160mm)

Kondisi: baru, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Germany Price: €25,400 Leasing rate: €485.14 Working area: 1250x2500 mm Plasma power source: HYPERTHERM Powermax 45 XP Max. sheet thickness – mild steel: 6 mm Max. piercing thickness – mild steel: 12 mm Max. severance cut thickness: 25 mm Recommended sheet thickness (non-alloyed steel): 4 mm Current: 45 A Current / duty cycle: 45 A at 50% duty cycle, 32 A at 100% duty cycle Psdpfx Abowiryusuegg Rapid traverse speed: 24 m/min Repeatability: 0.1 mm Water table volume: approx. 470 liters Max. support load: 500 kg/m² Length: 3060 mm Width: 1760 mm Height: 1500 mm Weight: 500 kg Compressed air operated plasma source: HYPERTHERM Powermax 45 XP CNC workstation software (external PC not included) Automatic torch height control via arc voltage Set-up load Precision profile rail guidance (HiWin) Backlash-free HTD timing belt Drive via stepper motors Robust frame construction Individually replaceable support slats Water table as spark arrester Floating torch mount combined with replaceable glide screws ensures constant cutting height Hand control for easy positioning and set-up on the workpiece Operating manual in GERMAN Equipment complies with CE regulations ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Plasma type: Compressed air Compressed air Compressed air Compressed air Piercing capacity: 16 mm 20 mm 22 mm 25 mm Severance cut: 32 mm 38 mm 50 mm 57 mm Recommended thickness (non-alloyed steel): 6 mm 16 mm 19 mm 22 mm Max. thickness (non-alloyed steel): 16 mm 20 mm 22 mm 25 mm Price: €26,900 €28,400 €29,900 €32,800 OPTIONS: Water tank for quick draining and filling of the table: €2,870 Pneumatic center punch: €770 Pneumatic engraver: €1,920 Exhaust bridge (prepared for DN160mm extraction, important for galvanized and thin sheets): €1,020 Extraction and filter unit Caremaster IFA 1.1 kW, Fan performance: 2,500 m³/h €2,950 Gantry height increase to 200 mm clearance: €710 Gantry height increase to 300 mm clearance: €900 Automatic nesting module: €500 PlasmaScan camera system: €830 Ohmic sensing for MaxPro200: €280

Kondisi: baru, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Germany Price: €23,200 Leasing rate: €445.44 Working area: 1000 x 2000 mm Plasma power source: HYPERTHERM Powermax 45 XP Max. sheet thickness – mild steel: 6 mm Max. piercing thickness – mild steel: 12 mm Max. severance cut thickness: 25 mm Recommended sheet thickness (unalloyed steel): 4 mm Current: 45 A Current / duty cycle: 45 A at 50% duty cycle, 32 A at 100% duty cycle Rapid traverse speed: 24 m/min Repeat accuracy: less than 0.1 mm Water table volume: approx. 300 l Max. table load: 400 kg/m² Length: 2560 mm Width: 1460 mm Height: 1500 mm Weight: 400 kg Compressed air-operated plasma source: HYPERTHERM Powermax 45 XP CNC workbench software (external PC not included) Automatic torch height control via arc voltage Single-phase connection Precision profile rail guide (HiWin) Backlash-free HTD timing belt Driven by stepper motors Robust frame construction Individually replaceable support grid Water table serves as spark trap Floating torch mount in combination with replaceable sliding screws ensures consistent cutting height Hand control for convenient movement and setup at the workpiece Operating manual in GERMAN Equipment complies with CE regulations ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Plasma type: Compressed air for all models Piercing capacity: 16 mm 20 mm 22 mm 25 mm Severance cut: 32 mm 38 mm 50 mm 57 mm Recommended thickness (unalloyed steel): 6 mm 16 mm 19 mm Pgjdpfxewiq Scs Abusg 22 mm Max. thickness (unalloyed steel): 16 mm 20 mm 22 mm 25 mm Price: €24,600 €26,100 €27,600 €30,600 OPTIONS: Water tank for quick draining and filling of the table €2,360 Pneumatic center punch €770 Pneumatic engraver €1,920 Extraction bridge (preparation for DN160 mm extraction, essential for galvanized and thin sheets) €1,020 Extraction and filtration unit Caremaster IFA 1.1 kW, fan capacity 2,500 m³/h €2,950 Gantry extension to 200 mm clearance €710 Gantry extension to 300 mm clearance €900 Automatic nesting module €500 PlasmaScan camera system €830 Ohmic sensing for MaxPro200 €280

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 8.000 mm, AJAN PP 260 A-5T 5-Axis Plasma Cutting Machine – 2015 This 5-axis plasma cutting machine AJAN PP 260 A-5T was manufactured in 2015. It features a robust AJAN PP260A power source, with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area covers 2000 mm x 8000 mm, and it is equipped with an AJANCNC 952 controller for precise operation. Take advantage of this opportunity to purchase the AJAN PP 260 A-5T plasma cutting system. Contact us for more information. Additional Equipment • Cutting gases: O₂, N₂, F5, H35 / Table ventilation: Mechanical valve with JET filter system / Optional equipment: Oxy-fuel torch, pipe cutting device, industrial fume extraction. Machine Advantages Technical Machine Advantages • Cutting capacity: mild steel: up to 65 mm / stainless steel: up to 50 mm / aluminum: up to 50 mm • Pierce capacity: mild steel: 40 mm / stainless steel: 25 mm / aluminum: 25 mm Pedpfx Asyaiyxobujgg • Max. positioning speed: 15 m/min • Positioning accuracy: ±0.01 mm • Number of axes: 5 (with bevel-cutting function) • Control system: Linux-based / Software: AJANCAD and AJANCAM v7.0

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), jangkauan kerja: 8.000 mm, ketebalan lembaran (maks.): 150 mm, ketebalan pelat baja (maks.): 150 mm, tebal plat aluminium (maks.): 30 mm, tegangan masuk: 400 V, lebar total: 4.500 mm, tinggi total: 3.605 mm, panjang total: 12.000 mm, lebar track: 4.000 mm, tinggi meja: 700 mm, panjang meja: 9.000 mm, lebar kerja: 2.500 mm, lebar meja: 3.000 mm, arus pemotongan: 600 A, panjang kerja: 8.000 mm, persyaratan ruang panjang: 12.000 mm, jenis pendinginan: air, jenis penyesuaian ketinggian: listrik, suhu lingkungan (maks.): 45 °C, Mesin kombinasi plasma-autogen dengan meja air Daya potong 600A Pgjdpfox Ew Ebox Abueg Meja air untuk pelat logam hingga maks. 2500x8000mm Mulai digunakan tahun 2009 Daya potong maks.: pelat baja 150 mm Harga baru: 224.000€ Pembongkaran sendiri

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, panjang meja: 6.000 mm, lebar meja: 2.500 mm, Peralatan dijual sebagai satu set: pemotong plasma Satronic E3500 + unit ventilasi + modul gas. Pedeycp R Nopfx Abujgg Unit ventilasi: Kemper System 8000 (5,5 kW; 7000 m3/jam) Modul kontrol gas: Thermal Dynamics Ultra-Cut 200 (GCM-2010) Mesin dalam kondisi berfungsi saat terakhir digunakan sekitar satu tahun lalu. Sejak itu belum digunakan atau diuji. Pembeli bertanggung jawab atas pembongkaran, pemuatan, dan transportasi mesin.

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm Pgjdpfxogu Nmhe Abujg - For round pipes up to max. OD = 220mm - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany The images show an older machine.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, This GASPARINI Spark 20040 was manufactured in 2008. The robust plasma cutting machine offers a large working area of 4000×2000 mm and can process sheet metal up to 60 mm thick. With cutting speeds from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it is designed for efficiency. Take advantage of this opportunity to purchase the GASPARINI Spark 20040 plasma cutter. Contact us for further information about this machine. Machine Advantages Technical Specifications • Supply voltage: 220 V, 400 V, 440 V / frequency: 50-60 Hz • Length x width (fully assembled): 4910 x 3150 mm / machine height: 1581 mm / cutting table height: 908 mm • Machine weight (without grate): 3300 kg / total machine weight: 3500 kg • Maximum sheet thickness: 60 mm / cutting speed: min 0.1 m/min, max 30 m/min / max positioning speed (X-axis): 40 m/min / max acceleration (X-axis): 2 m/s² • Maximum power consumption: 8 kW (control panel), 19.5 kW (plasma generator), 8 kW (fume extraction) • Coolant temperature: 10-40°C / minimum coolant flow rate: 6 l/min / coolant pressure: 3.5-4.5 bar • Output current: 20-130 A / maximum output power: 19.5 kW • Space requirements: 1400 × 600 × 300 mm • Cross-section of supply lines: 4 mm² / cross-section of main cable: 10 mm² / fuse protection: 32 A slow-blow Pgodpfx Abex U Ucisujg Additional information Without extraction system.