Beli Mesin pemotong laser dengan lintasan X 3000–3999 mm bekas (249)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Mesin pengolah logam & mesin perkakas Pengolahan pelat logam Mesin pemotong laser dengan lintasan X 3000–3999 mm
Lelang
Berakhir dalam
d
h
min
s
Lelang telah berakhir
Województwo pomorskie
10.443 km
Mesin pemotong laser
TrumpfTruLaser 3030 4kW
Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, jam operasional: 28.459 h, nomor mesin/kendaraan: A0220A2141, model controller: Siemens Sinumerik 840 D, daya laser: 4.000 W, ketebalan lembaran (maks.): 20 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi!
DETAIL TEKNIS
Area kerja: 3.000 x 1.500 mm
Ketebalan plat baja karbon maks.: 20 mm
Ketebalan plat baja tahan karat maks.: 15 mm
Ketebalan plat aluminium maks.: 10 mm
Daya laser: 4 kW
DETAIL MESIN
Kontrol: Siemens Sinumerik 840 D
Tipe laser: TruFlow 4000
Daya laser: 4 kW
Hnjdpeyttnaefx Ag Rji
Tipe: CO2
Dimensi & Berat
Dimensi (P x L x T): 9.300 mm x 4.600 mm x 2.200 mm
Berat: 12.000 kg
Jam operasi (per Januari 2026)
Jam nyala balok: 28.459 jam
Jam nyala laser: 51.970 jam
Catatan: Mesin saat ini sudah dibongkar.
Lelang
Berakhir dalam
d
h
min
s
Lelang telah berakhir
Nordrhein-Westfalen
11.327 km
Mesin pemotong laser
MAZAKSpace Gear 510
Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2002, jam operasional: 25.769 h, nomor mesin/kendaraan: 159687, daya laser: 2.500 W, jarak pergerakan sumbu X: 3.335 mm, jarak lintasan sumbu Y: 1.545 mm, jarak gerak sumbu Z: 420 mm, sudut putar sumbu A (maks.): 360 °, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi!
RINCIAN TEKNIS
Perjalanan sumbu X: 3335 mm
Hnsdpeymfmbefx Ag Rsi
Perjalanan sumbu Y: 1545 mm
Perjalanan sumbu Z: 420 mm
Sumbu A: ±360°
Sumbu B: ±135°
Dimensi benda kerja maks.: 3050 x 1525 x 22 mm
Kapasitas meja maks.: 810 kgf
DETAIL MESIN
Daya laser: 2500 W
Model laser: YB-L250A8M
Kontrol NC: Mazak & Fanuc L-64
Dimensi & Berat
Dimensi mesin: 7.525 x 2.875 x 2.300 mm
Dimensi pendingin: 920 x 1.600 x 1.780 mm
Dimensi unit ekstraksi: 850 x 850 x 930 mm
Berat mesin: 14,6 t
Jam operasi: 25.769 jam
PERLENGKAPAN
Pendingin
Unit ekstraksi
Lelang
Berakhir dalam
d
h
min
s
Lelang telah berakhir
Noord-Brabant
11.353 km
Mesin pemotong laser
BystronicBystar 3015
Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, jam operasional: 15.020 h, nomor mesin/kendaraan: R1519130, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 20 mm, jarak pergerakan sumbu X: 3.000 mm, Perlengkapan: ekstraksi debu, unit pendingin, RINCIAN TEKNIS
Gerak sumbu X: 3.000 mm
Ketebalan pelat baja maks.: 20 mm
Ketebalan pelat baja tahan karat maks.: 20 mm
Hnodpjyrnz Sefx Ag Rsi
RINCIAN MESIN
Model laser: ByLaser 4400
Daya laser: 4.400 W
Jam pemotongan laser: 15.020 jam
Jam daya hidup: 32.602 jam
PERLENGKAPAN
Unit pendingin
Sistem ekstraksi debu
Iklan kecil
Thailand
2.336 km
Mesin Pemotong Laser Ekonomis
BodorA4
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Einstiegsmodell Faserlaser-Blechschneidemaschine
Niedrige Laserschneidekosten und einfache Bedienung
Der modulare Schneidtisch mit Versteifungen spart Zeit beim Zerlegen und verbessert Komfort und Steifigkeit.
Die spezielle Faserlaserdüse und der Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Kohlenstoffstahl, gas- und kostensparendes Niederdruck-Stickstoffschneiden von Edelstahl sowie ein hochwertiges Luftschneiden bei Kohlenstoffstahl.
Faserlaserschneidköpfe erkennen hervorstehende Hindernisse, um die Schadensrate effektiv zu senken und die Wartungskosten des Laserschneiders zu sparen.
Hedpfx Agehv U Sws Rsni
Materialien: Metall
Zustand: Neu
Lasertyp: Faserlaser
Laserleistung: 1000W, 1500W, 2000W, 3000W
Schneidbereich: 4000 x 1524 mm
Schneidgeschwindigkeit: 0–100 m/min
Positioniergenauigkeit: ±0,05 mm
Wiederholgenauigkeit: ±0,03 mm
Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT
CNC-Steuerung: Ja
Kühlung: Wasserkühlung
Iklan kecil
Ji Nan Shi
4.183 km
Perlindungan lengkap dan keamanan yang lebih tinggi
Bodori7
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Eine kompakte Faserlaser-Blechschneidemaschine mit Vollschutz
Kleine Stellfläche bei gleichzeitig vollständigem Schutz für erhöhte Sicherheit.
Hsdohwrg Nepfx Ag Rsni
Jeder Rahmen des Maschinenbetts wird nach dem Zapfen-Steck-Verfahren verschweißt, um optimale mechanische Eigenschaften, bessere Stabilität und hohe Festigkeit zu gewährleisten.
Der ausziehbare Schneidetisch – auf Wunsch auch elektrisch betriebener Tisch – spart Platz und verbessert das Bedienerlebnis deutlich.
Bequeme und schnelle Einhand-Bedienung zum Öffnen und Schließen; Die Tür des Laserschneiders ist durch ein Zahnstangen-Ritzel-Übertragungssystem kombiniert mit einem selbstverriegelnden Schneidesystem sicher und zuverlässig.
Faserlaser-Schneidköpfe können herausragende Hindernisse erkennen, wodurch die Beschädigungsrate effektiv reduziert und die Wartungskosten der Laserschneidanlage gesenkt werden.
Verarbeitbare Materialien: Metall
Zustand: Neu
Lasertyp: Faserlaser
Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W
Arbeitsbereich: 3048 x 1524 mm
Schneidgeschwindigkeit: 0–100 m/min
Positioniergenauigkeit: ±0,05 mm
Wiederholgenauigkeit: ±0,03 mm
Unterstützte Dateiformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT
CNC-Steuerung: Ja
Kühlung: Wasserkühlung
Iklan kecil
Jerman
10.886 km
Mesin pemotong laser
BYSTRONICBYAutonom 3015 - 6000W
Hubungi
Kondisi: bekas, Tahun pembuatan: 2012, Technical Details:
y-travel: 1500 mm
Column width: 2300 mm (gantry)
Beam hours: approx. 22,000 h
Laser power: 6,000 W
Control system: CNC P 8109-10-600D
Table length: 4500 mm / support surface: mm
Table width: 2300 mm
Operating pressure: 120 hPa
Required water pressure: max. 6.0 bar
Voltage: 400 V / 50 Hz
Laser unit dimensions (LxWxH): approx. 3.0 x 1.5 m
Filter system dimensions (LxWxH): approx. 1.4 x 2.0 x 2.2 m
Chiller dimensions (LxWxH): approx. 2.55 x 1.0 x 1.9 m
Space requirement total: approx. 12.8 x 5.3 x 4.3 m
Flatbed laser cutting machine
Application: industrial cutting and engraving
Laser medium: CO², N², compressed air
Sheet metal dimensions/format: 3000 x 1500 mm
Cutting thickness: e.g. steel X5CrNi18-10 = 1 – 25 mm / stainless steel 25 mm / aluminum: 1 – 15 mm (tables available)
Resonator – laser source: ByLaser 6000W, wavelength 10,600 nm, beam Ø 20 mm, circular polarization
Shuttle table (LxWxH): 4500 x 2300 x 1000 mm, load capacity 900 kg, usable table area = 3200 x 2000 mm
Chiller: Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65 kW, high pressure 27 bar, pump 220 l/min, fan
Extraction unit: Donaldson type DFPR06-SPRK (size approx. 1.4 x 2.0 x 2.2 m), year of manufacture 2014; 5.5 kW with control timer
Transverse conveyor: Kabelschlepp type SRF 040 (size LxWxH: approx. 3630 x 705 x 1000 mm)
Hnodpfx Aou Nu R Isg Roi
Light barrier: Sick type M 4000
Cutting bridge: y-travel 3000 mm, column width 2300 mm, cutting carriage size (LxWxH): 400 x 300 x 650 mm
Operator terminal with complete cabinet combination and hand control unit
Cut Control
Iklan kecil
Częstochowa
10.420 km
Mesin pemotong laser
LVDElectra FL3015
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Produsen: LVD
Model: Electra FL3015
Nomor Seri: 36445
Negara Asal: Belgia
Tahun Pembuatan: 2016
Parameter Teknis:
Tipe Laser: Laser serat
Daya sumber: 3 kW
Luas area kerja: 3000 mm × 1500 mm
Sumber laser: Sumber laser serat Rofin FL030
Nomor Seri Sumber: 987
Tahun Pembuatan Sumber: 2015
Perlengkapan tambahan:
Unit pendingin Thermotec – unit pendingin untuk stabilisasi suhu sumber laser
Donaldson Torit DCE DFPro-4SPK – sistem ekstraksi dan filtrasi asap laser
Hnjdpfx Aeyhppvsg Rsi
Meja masuk/keluar – meja pemuatan dan pembongkaran otomatis
Pagar pelindung cahaya – sistem perlindungan cahaya
Iklan kecil
Jerman
11.248 km
TRUMPF Trumatic L 3050
TRUMPFTrumatic L 3050
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 115.000 h, daya laser: 5.000.000 W, jarak pergerakan sumbu X: 3.000 mm, jumlah sumbu: 3, TRUMPF Trumatic L 3050 3-sumbu ini diproduksi pada tahun 2006. Mesin ini dilengkapi dengan sumber laser 5000 W yang kuat dan dilengkapi dengan sistem pemuatan pelat LoadMaster untuk otomasi yang lebih baik. Mesin ini telah mencatat sekitar 40.000 jam operasi dengan sinar aktif dan 115.000 jam operasi dengan laser menyala. Jika Anda mencari sistem pemotongan laser berkualitas tinggi, pertimbangkan mesin pemotong laser CO2 TRUMPF Trumatic L 3050 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut.
Hnodoyuw Dbjpfx Ag Rsi
Iklan kecil
Friesenheim
11.263 km
Mesin pemotong laser
MazakOptiplex Nexus 3015 Fiber 4KW
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine
Manufacturer: Yamazaki Mazak Corporation
Model: Optiplex Nexus 3015 Fiber 4KW
Year of manufacture: 12/2016
Condition: Used, very good, under power
Availability: from July 2023
Operating hours:
CNC ON time: 16,276 h
Laser ON time: 15,653 h
Automatic mode time: 11,096 h
Cutting time: 10,964 h
Total cutting time: 7,365 h
CNC Control: MAZATROL PREVIEW 3
Weight: 12,800 kg
Power requirement: 57 kVA
Dimensions: 8,490 mm x 3,485 mm x 2,010 mm
Axis travel: 3,100 mm x 1,580 mm x 110 mm
GENERAL MACHINE OPTIONS
6981SD120 1 set of alignment tools
6981TL307 Support grate (rib spacing 100 mm)
6981AS670 Automatic calibration device
6981SD154 Non-contact height sensing with repeat function
6981AS684 Nozzle cleaning brush
6981AS678 Focal position adjustment
6981SD168 Manual workpiece clamping
6981SD130 Machine feet / leveling shoes
6981SD282 Machine status indicator light
6981SD216 NC monitoring for shielding gas pressure
6981SD189 without resonator
6981NO513 Control panel programming via fixed programs
6981CV222 Scrap material collection container
6981NO612 Cutting table layer detection
6981EL110 Transformer for the European market
6981SD200 Additional selector switch for cutting gas
CUTTING HEADS
Hedpfx Aeyuchxsg Roni
6981LN705 Multi-control cutting head
6981LN005 Lens for multi-control cutting head
6981LN610 Cassette for focus lens, multi-control cutting head
6981LN602 Protection window for multi-control cutting head, 5 pcs
NOZZLES
6981NZ068 Mazak Hi-Acc Pencil Nozzle (Sgl) 1.0, 3.0 mm, 5 pcs each
6981SD317 Mazak Hi-Acc Point Nozzle (S) 1.2, 1.5, 2 mm, 5 pcs each
6981SD303 Mazak Precision Nozzle Adapter (8 pcs)
ASSIST GAS LINES
6981TL321 3rd assist gas line (30 bar)
PAINTWORK
6981SD728 Mazak standard color
PROTECTIVE ENCLOSURE
6981CC096 Laser protection windows (5 pcs)
SAFETY DEVICES
6981SD030 Work area lighting
6981SD748 Machine with CE marking
6981ES230 Preparation for dust extractor
FACTORY AUTOMATION
6981AS050 Automatic power off via safety switch activation. Power is switched off at the end of a program.
PALLET CHANGER
6981PC010 Dual pallet changer. The next workpiece can be prepared while processing.
CNC CONTROL
6981NC319 15″ XGA color TFT monitor
6981NO869 LAN interface
6981NC083 Mazatrol Preview 3 control
6981FT575 NC repeat function
6981MZ200 Relocation detector
6981NO870 USB interface for PC
MACHINE MODEL
6981SD185 Preparation for 4kW resonator
GENERAL MACHINE OPTIONS
6981AS662 Automatic nozzle changer magazine with 8 stations
6981AS685 Nozzle cooling function
6981DEAA002 Fiber laser resonator 4kW incl. cables and cooling unit
6981SD118 Intelligent monitoring + focus point detection
6981RB165 Workpiece lift table (CE)
INCLUDED PERIPHERAL EQUIPMENT
6981DEES001 Extraction system for laser cutting machine Donaldson DFPRO4
DOCUMENTATION
6981SD073 Set of manuals in electronic form on CD
Iklan kecil
Friesenheim
11.263 km
Mesin pemotong laser
MazakOptiplex 3015 Fiber 4KW
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Mazak Optiplex 3015 Fiber 4kW Laser Cutting Machine
Manufacturer: Yamazaki Mazak Corporation
Model: Optiplex Nexus 3015 Fiber 4kW
Year of manufacture: 05/2016
Condition: Used, very good, powered on
Availability: From May 2023
Operating hours:
- CNC ON time: 29,999 h
- Laser ON time: 15,653 h
- Automatic operation time: 11,839 h
- Cutting time: 28,708 h
- Total cutting time: 6,665 h
CNC Control: MAZATROL PREVIEW 3
Weight: 15,000 kg
Travel distances: 3,100 mm x 1,580 mm x 110 mm
Power requirement: 54 kVA
GENERAL MACHINE OPTIONS
- 1 set of alignment tools
- Support grid (bar spacing 100 mm)
- Automatic calibration device
- Non-contact height sensing with repeat function
- Nozzle cleaning brush
- Focus position adjustment
- Manual workpiece clamping
- Machine feet / leveling shoes
- Machine status indicator light
- NC monitoring for shielding gas pressure
- Without resonator
- Programming function via fixed programs at the control
- Collection container for scrap material
- 6981NO612 cutting table layer detection
- Transformer for European market
- Additional selector switch for cutting gas
CUTTING HEADS
- Multi-Control cutting head
- Lens for Multi-Control cutting head
- Cassette for focus lens Multi-Control cutting head
- Protection window for Multi-Control cutting head (5 pcs)
NOZZLES
- Mazak Hi-Acc Pencil Nozzle (Sgl) 1.0, 3.0 mm (5 pcs each)
- Mazak Hi-Acc Point Nozzle (S) 1.2, 1.5, 2 mm (5 pcs each)
- Mazak precision nozzle adapter (8 pcs)
AUXILIARY GAS LINES
- 3rd auxiliary gas line (30 bar)
PAINT
- Mazak standard color
SAFETY ENCLOSURE
- Laser protection glass (5 pcs)
SAFETY EQUIPMENT
- Workspace lighting
- Machine with CE marking
- Prepared for dust extractor
FACTORY AUTOMATION
- Automatic power-off via safety switch - power is cut at the end of the program.
PALLET CHANGER
- Dual pallet changer. The next workpiece can be set up during ongoing machining.
NUMERICAL CONTROL
- 15" XGA color TFT monitor
Hnsdeyucguopfx Ag Rei
- LAN interface
- Mazatrol Preview 3 control
- NC repeat function
- Relocation detector
- USB interface for PC
MACHINE MODEL
- Prepared for 4kW resonator
GENERAL MACHINE OPTIONS
- Automatic nozzle changer magazine with 8 slots
- Nozzle cooling function
- Fiber laser resonator 4kW incl. cable and chiller unit
- Intelligent monitoring + focus point detection
- Workpiece lift table (CE)
INCLUDED PERIPHERAL EQUIPMENT
- Extraction unit for laser cutting machine Donaldson DFPRO4
DOCUMENTATION
- Set of manuals in electronic form on CD
Iklan kecil
Oberweis
10.834 km
Mesin pemotong laser
TrumpfTruLaser 1030
Hubungi
Kondisi: bekas, Tahun pembuatan: 2010, Trumpf TruLaser 1030 - Laser Cutting Machine
- B&R Automation PC 820 CNC Control
- TruCoax 2500 Laser
- Annually serviced by Trumpf (last service July 2025)
- Year of manufacture: 2010
Technical Data
Working Area:
- X-axis: 3078 mm
Hnjdpfx Aeyghm Dog Rsi
- Y-axis: 1550 mm
- Z-axis: 76 mm
Max. Material Thickness:
- Mild steel: 16 mm
- Stainless steel: 8 mm
- Aluminium: 6 mm
Speed:
- Max. cutting speed: 40 m/min
- Cutting acceleration: 2 m/s²
- Positioning acceleration: 9 m/s²
Accuracy:
- Smallest programmable increment: 0.001 mm
- Positioning deviation: ± 0.1 mm/m
- Mean positioning scatter: ± 0.03 mm
Laser:
- Max. laser power: 2500 W
- Wavelength: 10.6 µm
- Power stability: ± 2 %
- Mode structure: TEM00
Compressed Air Consumption:
- Standard cutting: 333 l/min
- Air cutting: 500 l/min
Electrical Data:
- Drive system: maintenance-free three-phase motors
- Connected load: 65 kVA
- Circuit protection at 400 V: 100 A
Dimensions & Weights:
- Dimensions (W x H x D): 7396 x 2291 x 3287 mm
- Total weight: 8,850 kg
Iklan kecil
Spytkówki
10.578 km
Mesin pemotong laser
ErmaksanFibermak Momentum Gen-2
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, daya laser: 2.000 W, ketebalan lembaran (maks.): 12 mm, ketebalan maksimum lembaran baja tahan karat: 6 mm, tebal plat aluminium (maks.): 6 mm, ketebalan pelat tembaga (maks.): 6 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jenis pendinginan: air, panjang total: 9.000 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, ermaksan-fibermak-momentum-gen2-pl-en
Hnodpfoyuyptjx Ag Rji
Iklan kecil
Italia
11.016 km
Mesin pemotong laser serat
LVDPhoenix FL 3015
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Data Umum
Hnsdpfx Aex S Skljg Rsi
Berat mesin: 14.000 kg
Tinggi mesin: 2.250 mm
Pergerakan
Pergerakan Sumbu X: 3.070 mm
Pergerakan Sumbu Z: 130 mm
Pergerakan Sumbu Y: 1.570 mm
Penggerak Utama
Jumlah sumbu: 3
Daya laser: 8 kW
Dimensi
Panjang mesin: 10.500 mm
LVD Phoenix FL 3015 3-sumbu ini diproduksi tahun 2019 dan dilengkapi sumber laser IPG 8 kW, mampu menangani ukuran plat hingga 3.000 × 1.500 mm. Mesin ini menawarkan kecepatan pemosisian cepat hingga 140 m/menit dan dapat menahan berat plat maksimal 900 kg. Jika Anda mencari kemampuan pemotongan berkualitas tinggi, pertimbangkan mesin LVD Phoenix FL 3015 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut.
Jenis Aplikasi
Pemotongan
Iklan kecil
Oberham
10.852 km
Mesin pemotong laser
METALLKRAFTX3015 6kw
Hubungi
Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, daya laser: 6.000 W, ketebalan pelat baja (maks.): 30 mm, tebal plat aluminium (maks.): 20 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, akurasi pemposisian: 0,03 mm, berat benda kerja (maks.): 1.000 kg, berat keseluruhan: 5.000 kg, incl. 7.5 kW extraction system
Compact, space-saving and cost-effective fiber laser
Manually extendable worktable – electrically assisted
Worktable safety door can be opened and closed electrically
Stable welded construction for high rigidity, precision, and durability
Machine bed shielded from heat, sparks, and slag by manganese steel plates
Efficient cutting fume extraction, with airflow focused on the current working area via controlled dampers
Raycus laser source with HSG autofocus laser head (optional IPG laser source)
Laser head offers faster focusing than comparable units, allowing for higher piercing speeds in thicker materials
Main lens protected by an easily replaceable double protective lens
Efficient water cooling for the laser head
Power stabilizer compensates for voltage fluctuations, ensuring consistent cutting quality
Very user-friendly machine operation and control software
Control software features many templates for programming simple components
Hnsdpfxswf H Ave Ag Rei
Material storage management
User-friendly nesting software with many features
Laser work area monitored by camera, with live feed to screen
Iklan kecil
Jelgava
10.104 km
Mesin pemotong laser
BystronicBystar 3015
Hubungi
Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2006, nomor mesin/kendaraan: 2485, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, produsen pengendali: Bystronic, model controller: HMI, jenis laser: Laser CO₂, produsen sumber laser: Bystronic, model sumber laser: ByLaser 4400, daya laser: 4.400 W, panjang gelombang laser: 10.600 nm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 12 mm, tebal plat aluminium (maks.): 8 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, tegangan masuk: 400 V, arus masuk: 125 A, frekuensi input: 50 Hz, jenis pendinginan: air, berat keseluruhan: 12.000 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, sistem pelumasan terpusat, unit pendingin, For sale: a powerful and reliable Swiss-made industrial laser cutting system. The equipment comes as a complete working package, including a material storage tower and upgraded filtration system.
Key specifications:
Model: Bystronic Bystar 3015
Laser source: ByLaser 4400 (power 4400 W)
Type: CO2 laser
Year of manufacture: 2006
Working area: 3000 x 1500 mm
Hnedpeygikdsfx Ag Roi
Country of manufacture: Switzerland
The package includes:
Storemaster RollyTower RT (2010): Automated sheet material storage system with a total capacity of 30,000 kg (3,000 kg per level).
Donaldson Torit DFPRO4 (2018): High-efficiency fume and dust filtration unit with nanofiber filters.
EF Cooling WKL 430: Industrial chiller for stable laser operation.
Control unit: Original Bystronic HMI system.
Condition and notes:
The machine is offered in its current condition. Thanks to its 4.4 kW power, it efficiently cuts thick metal materials. The Donaldson filtration system is significantly newer than the laser itself (2018), ensuring modern air purification.
If you have any questions, feel free to contact us!
Iklan kecil
Jerman
11.248 km
LVD Orion 3015 Plus
LVDOrion 3015 Plus
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 23.323 h, daya laser: 2.500.000 W, jarak pergerakan sumbu X: 3.080 mm, jarak lintasan sumbu Y: 1.555 mm, jarak gerak sumbu Z: 240 mm, berat keseluruhan: 13.000 kg, tinggi total: 2.200 mm, panjang produk (maks.): 9.350 mm, jumlah sumbu: 3, en-GB
Hnsdpfx Agjyg Ixgj Rji
Iklan kecil
Jerman
11.248 km
TRUMPF Trumatic L3050
TRUMPFTrumatic L3050
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, daya laser: 6.000 W, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 115 mm, jumlah sumbu: 3, el
Hnodpfx Aeym A Hrog Rji
Iklan kecil
Polandia
11.248 km
TRUMPF TruLaser 3030
TRUMPFTruLaser 3030
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D SL, daya laser: 3.000.000 W, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 115 mm, berat keseluruhan: 12.700 kg, lebar total: 3.000 mm, tinggi total: 2.400 mm, panjang produk (maks.): 9.400 mm, jumlah sumbu: 3, en-GB
Hnjdeyka Dvspfx Ag Rji
Iklan kecil
Hungaria
11.248 km
LVD Electra-FL 3015
LVDElectra-FL 3015
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.700 h, jarak pergerakan sumbu X: 3.080 mm, jarak lintasan sumbu Y: 1.555 mm, jarak gerak sumbu Z: 100 mm, berat keseluruhan: 15.000 kg, tinggi total: 2.250 mm, panjang produk (maks.): 11.000 mm, This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and is equipped with a 4 kW Rofin/Coherent fiber laser. The machine features automatic shuttle tables, a cutting head with lens systems, and automated functions for nozzle cleaning, height calibration, and gas selection. It supports a maximum sheet size of 3050 x 1525 mm and delivers high-speed positioning. If you are looking for high-quality cutting capabilities, consider the LVD Electra-FL 3015 we have for sale. Contact us for more information.
• Production hours:
• Machine: 15,700 hours
• Laser source operating time: 9,980 hours
• Type: Sinumerik 840Dsl / B&R APC 910
• Operating system: Windows® 7 Embedded
• Storage capacity: 4GB RAM / 60GB SSD
• Display: 19" LCD touchscreen
• Network card: 1Gbit/sec RJ45 connection
• USB interface: 2 x USB 3.0 on the front panel
• Max. X-Y positioning speed: 170 m/min
• Max. Z-axis positioning speed: 30 m/min
• Smallest programmable step: 0.01 mm
• Positioning accuracy: 0.05 mm
• Repeatability: 0.025 mm
• Maximum sheet size: 3050 x 1525 mm
• Maximum sheet weight: 700 kg
• Automatic shuttle tables
• Cutting head with 5" or 7.5" lens system
• Automatic nozzle cleaning and height calibration
• NC-focus, automatic focal point adjustment
• Cutting head with crash protection system
• Capacitive height sensing
• Automatic selection of cutting gas: oxygen, nitrogen, air
• Automatic gas pressure control via servo valve
• Automatic sheet referencing (laser eye, capacitive system)
• High-pressure nitrogen cutting
Hsdpfxjx D En Ej Ag Rjni
• TPC Total Power Control, adjustment of laser power according to speed
• Including chiller and exhaust filter
• Light guards to protect the area around the shuttle tables
• 19" touchscreen with new user-friendly Touch®-L interface
• Automatic start/stop function
• Remote service available
• Built according to European safety regulations and CE marked
• Automation-capable
Dimensions
Machine depth: 4,895 mm
Iklan kecil
Jerman
11.248 km
SEI Laser Mercury 1530
SEI LaserMercury 1530
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 4.000 h, daya laser: 1.500 W, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, berat keseluruhan: 2.400 kg, lebar total: 2.750 mm, tinggi total: 1.770 mm, panjang produk (maks.): 5.050 mm, This Sei Laser Mercury 1530 fiber laser cutting system was manufactured in 2017 and has 4,000 operating hours. The machine offers a laser output of 1.5 kW. The Mercury 1530 is a high-performance fiber laser cutting system designed for precise machining of metals and metal alloys. Equipped with advanced linear motor technology, the machine provides high dynamics, excellent positioning accuracy, and reliable industrial performance. With a working area of 1500 × 3080 mm, it is ideally suited for medium to large sheet formats.
Advantages of the machine
Technical advantages
Hodex D R T Tepfx Ag Reni
• Maximum bulk height: 50 mm
• Drive system: Linear motors
• Laser type: Fiber laser
• Laser wavelength: 1070 nm
• Laser power: 1.5 kW
• Working area: 1500 × 3080 mm
• Machine dimensions (L × W × H): 5050 × 2750 × 2150 mm
• Repeatability:
Iklan kecil
Niederlangen
11.198 km
Mesin pemotong laser
BODORC3 12kW
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Table length: 3048 mm
Table width: 1524 mm
Torch heads: 1
Control: CNC
Workpiece weight: 1095 kg
Traverse speed: 180 m/min
Weight: 4150 kg
Space requirements approx. 9392 x 2232 x 2307 mm
Hnedpsx I Sglefx Ag Roi
Laser cutting system with automatic shuttle table
Configuration
1. Bodor Power 12kW laser source
2. Bodor Genius laser cutting head with autofocus
3. Bodor Thinker 3.0 control system
4. Mortise-and-tenon type nameplate welded segmented bed
5. Stretched aluminum gantry
6. Bodor servo motor and driver
7. Bodor rack and pinion
8. One-click processing
9. Bodor Lightning perforation technology
10. Expert database for high-speed cutting
11. Automatic adjustment of cutting gas pressure
12. Open door protection
13. Fault alarm during cutting
14. Ergonomic remote control (Bodor Mango®)
15. Active anti-collision function
16. Intelligent anti-shake
17. Gas-saving continuous flow nozzle
18. Smart maintenance reminder
19. WIFI internet connection
20. Water chiller
21. Extraction
22. Consumables kit
CUTTING CAPACITY:
CARBON STEEL (mm) 35
STAINLESS STEEL (mm) 35
ALUMINUM (mm) 25
OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Niederlangen
11.198 km
Mesin pemotong laser
BODORC3 3kW
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Table length: 3048 mm
Table width: 1524 mm
Torch heads: 1
Control: CNC
Workpiece weight: 911 kg
Travel speed: 180 m/min
Weight: 4150 kg
Space requirement approx. 9392 x 2232 x 2307 mm
Laser cutting system with automatic shuttle table
Configuration:
1. Bodor Power 3kW laser source
2. Bodor Genius laser cutting head with autofocus
3. Bodor Thinker 3.0 control system
4. Mortise-and-tenon style welded segmented bed
5. Extended aluminum gantry
6. Bodor servo motor and driver
7. Bodor rack and pinion
8. One-click processing
9. Bodor Lightning perforation technology
10. Expert database for high-speed cutting
11. Automatic adjustment of cutting gas pressure
12. Open-door safety protection
13. Fault alarm function during cutting
14. Ergonomic remote control (Bodor Mango®)
15. Active anti-collision function
16. Intelligent anti-shake
17. Gas-saving continuous-flow nozzle
18. Intelligent maintenance reminder
19. WIFI internet connection
20. Water chiller
21. Extraction system
22. Wear parts kit
CUTTING CAPACITY:
Mild steel 14 mm
Stainless steel 10 mm
Aluminum 6 mm
Hedpfx Ajwnt Eieg Rjni
OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor
Iklan kecil
Niederlangen
11.198 km
Mesin pemotong laser
BODORP3 12kW
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, en1
Hnsdpfx Aowmwwmsg Roi
Iklan kecil
Niederlangen
11.198 km
Mesin pemotong laser
BODORi7 6kW
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Table length 3000 mm
Table width 1500 mm
Number of cutting heads 1
CNC control
Workpiece weight 900 kg
Traversing speed 91 m/min
Space requirement approx. 5562 x 2270 x 2388 mm
Laser cutting system with manual shuttle table
Configuration:
1. BodorPower laser source 6 kW
2. Bodor Genius laser cutting head with autofocus
3. Bodor Thinker 3.0 control system
4. Dovetail and mortise bed structure
5. Bodor servo motor and driver
6. Nitrogen control valve
7. Bodor Lightning perforation technology
8. Automatic nesting for material remnants
Hnodpewh Ulqefx Ag Rei
9. 21.5 inch monitor with touch function
10. Automatic cutting gas pressure adjustment
11. Active anti-collision function
12. Intelligent vibration protection
13. Anti-burn mineral casting
14. Bodor Mango® ergonomic remote control
15. Gas-saving nozzles with stable flow
16. Intelligent maintenance reminder
17. WIFI internet connection
18. Water cooling
19. Extraction system
20. Spare parts set
CUTTING CAPACITY:
MILD STEEL 20 mm
STAINLESS STEEL 18 mm
ALUMINIUM 14 mm
Total machine rated power: 36.4 kW
Total machine rated current: 69.2 A
Average power consumption: 23.1 kWh
OPTIONAL: LANTEK EXPERT II CUT software including postprocessor
Iklan kecil
Niederlangen
11.198 km
Mesin pemotong laser
BODORP4 12kW
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Table length 4000 mm
Table width 2000 mm
Number of cutting heads 1
Control system CNC
Workpiece weight 2510 kg
Travel speed 200 m/min
Space requirement approx. 11599 x 3380 x 2718 mm
Laser cutting system with automatic shuttle table
Configuration:
1. BodorPower laser source 12 kW
2. BodorGenius laser cutting head with autofocus
3. BodorThinker 3.0 control system
4. Bed with tenon and mortise structure
5. Stretched aluminium gantry
6. One-click fully automatic processing
7. Automatic nesting of residual material
8. Edge detection and automatic focal length zero-point setting via intelligent recognition
9. Bodor Lightning perforation technology
10. 21.5-inch monitor with touch function
11. Intelligent gas pressure control
12. Automatic setting of cutting gas pressure
13. Bodor Mango® ergonomic remote control
14. Active anti-collision function
15. Intelligent vibration protection
16. Intelligent overheating adaptation
17. Gas-saving nozzles with stable flow
18. Intelligent maintenance reminder
19. WIFI internet connection
20. Water cooling
21. Dust extraction function
22. Safety light curtains
23. Exhaust extraction
24. Set of wear parts
CUTTING CAPACITY:
MILD STEEL 35 mm
Hjdpjwh Ukyefx Ag Rjni
STAINLESS STEEL 35 mm
ALUMINIUM 20 mm
Kami memudahkan pencarian untuk Anda
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.







































































































































































































