Kondisi: bekas, Tahun pembuatan: 2003, diameter roda gerinda: 400 mm, sudut heliks: 45 °, diameter roda: 1.500 mm, used Höfler Rapid 1500, year of manufacture 2003 Measuring device: Mahr Oil preparation unit: Interlit Csdpfxev U D Tfj Aarehf Location: Australia

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 7.000 h, Fungsionalitas: berfungsi sepenuhnya, PRÄWEMA Gear Honing Machine Year of Manufacture: 2022 Location: ITALY Specifications Chodpfx Ajx Ddmtsarsf Workpiece: - Workpiece diameter: 20–150 mm - Maximum face width: 70 mm - Workpiece weight: 20 kg - Number of teeth: 6–150 - Module: 1–5 mm Workpiece spindle: - Max. speed: 6,000 rpm - Installed power: approx. 25 kW Tool: - Outer diameter of honing wheel: 270 mm - Width of honing wheel: 20–70 mm - Honing wheel material: Ceramic Tool spindle: - Max. speed: 2,000 rpm - Installed power: approx. 25 kW Machine: - Total connected load, approx.: 70 kVA - Footprint (W × L × H): … - Total weight, approx.: 11 t - CNC control: Bosch Rexroth MTX, CML 85 Longitudinal slide, Z-axis: - Linear drive - Drive torque: 3,700 Nm - Rapid traverse speed: 60 m/min - Theoretical feed rate: 200 m/min - Max. travel distance: 400 mm Cross slide, X-axis: - Linear drive - Drive torque: 2,150 Nm - Rapid traverse speed: 60 m/min - Theoretical feed rate: 200 m/min - Max. travel distance: 1,050 mm Swivel axis, W-axis: - AC servo drive: 10,000 rpm - Adjustable gear ratio: i = 5000:1 - Swivel range: –90° / +16° Workpiece spindle, C-axis: - Direct drive, max. speed: 7,000 rpm - Drive power: 30 kW - Torque: 112 Nm - Digital measuring system Tool spindle, B-axis: - Direct drive (hollow shaft drive), max. speed: 2,000 rpm - Drive power: 30 kW - Torque: 150 Nm - Digital measuring system Extremely short cycle times are already achieved with the single-spindle SynchroFine. Decades of PRÄWEMA’s experience in building twin- or multi-spindle machines is now also utilized for double-spindle PräwemaHoning® with the “SynchroFine” type. This results in reduced auxiliary times down to just 3 seconds.

Kondisi: bekas, Tahun pembuatan: 2003, steuerung-bwo Chjdsxt Ur Sopfx Aarjf

Kondisi: baik (bekas), Maximum wheel diameter: 1600 mm Wheel width: 250 mm Module – max.: 30 Module – min.: 8 Tooth height: 58 mm Tooth width: 250 mm Machine weight approx.: 42.3 t Required space approx.: 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° Minimum: 150 Maximum: 800 - Pitch cone angle, in degrees Csdpfxsu Dbuco Aarehf Minimum: 5 Maximum: 85 - Tooth angle Minimum: 0° Maximum: 45° - Number of teeth to be cut Minimum: 10 Maximum: 150 The machine is complete, fully functional, and in good condition. Equipment / Accessories: - Complete set of change gears - 4 pcs. cutter heads - Various milling cutters - Operating manual in English

Kondisi: bekas, Tahun pembuatan: 1997, Technische-Details-2024-06-10 Chjdpfxex Aq Ego Aaref

Kondisi: bekas, Merek: PRÄWEMA, Tipe: 205HS2-2 / Synchrofine, Tahun pembuatan: 2008, No. mesin: 077238, Kontrol: prod. Rexroth Indramat, Tipe System 200 BTV20, termasuk terminal kontrol manual. Diameter benda kerja: 95 mm, panjang benda kerja maks.: 59 mm. Kecepatan spindle maksimum C-piece: 6.000 rpm / 7.000 rpm, B-spindle alat: 2.000 rpm. Pergerakan maksimum Z/X: 60 m/menit. Kepala honing no. ZNG: 416101804-8, thn 2008, no. seri: 221. Rangka mesin granit, prod. Eckbert Reitz, Tipe HFSL204HS2, thn 2008. Otomasi penanganan benda kerja, perangkat penguji kualitas permukaan, baki penampung oli, pompa prod. Brinkmann, tipe TH160/350-001. Jam operasi per 18.11.25: 69.518. Chsdex Ahc Nopfx Aarof

Kondisi: bekas, Tahun pembuatan: 1959, tinggi total: 1.900 mm, lebar total: 2.200 mm, panjang total: 1.500 mm, trans_001 Codpfx Aaowniikershf

Kondisi: sangat baik (bekas), mikron_a33_description_en Cjdox A D Izjpfx Aarshf

Kondisi: bekas, Tahun pembuatan: 2012, Maximum wheel diameter: 300 mm Wheel width: 320 mm Module – max.: 10 Module – min.: 0.5 Maximum helix angle: 45° Frequency: 50 Hz Cedpfx Asvxwtgearjhf Voltage: 400 V Main fuse: 125 A X-axis: 270 mm Y-axis: 250 mm Z-axis: 320 mm A-axis: +/- 45° B-axis: 360° C-axis: 360° Total power requirement: 89 kW Machine weight approx. 23.5 t Space requirement approx. 11.2 x 5.5 x 2.9 m Automated Oil centrifuge station EWAB workpiece storage Hoffmann coolant filtration system HSF 100 SE/K Minimax fire extinguishing system W+W air filtration system Promot Automation "Cellmaster" (3 cells), year of manufacture 2019

Kondisi: bekas, Tahun pembuatan: 1986, Diameter roda - maks. 150 mm Modul - maks. 5 Chodpfxoxzuzis Aaref Modul - min. 0,5 Berat mesin sekitar 10.000 kg Kebutuhan ruang sekitar 6500 × 2700 × 3600 mm

Kondisi: bekas, Tahun pembuatan: 1997, de-1 Chodpfx Aoxz Aw Eoaref

Kondisi: bekas, STRAUSAK_HS30_DE_1 Cedpjxyxxijfx Aarehf

Kondisi: bekas, Tahun pembuatan: 1990, panjang total: 5.900 mm, tinggi total: 2.000 mm, lebar total: 1.300 mm, de2hu-001 Codpfx Aexz Du Searehf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Reishauer RZ 362A dengan sekitar 60 set cakram berlian Dimensi ulir penggiling: Diameter luar min/maks: 280/350 mm Lebar: 84/104 mm Pitch maks. dengan batasan: MOD 8.0 (DP 3,2) Jumlah start: dengan batasan hingga 3 Lebar yang dapat digunakan maksimum (pergeseran): 90 mm Informasi teknis lebih detail dapat ditemukan pada file PDF terlampir. Aksesori: Chodpfx Aasxb Ufujrsf Perangkat dresser Cakram berlian sekitar 60 set Batu gerinda Turbo separator

Kondisi: bekas, Tahun pembuatan: 2002, Maximum bevel gear diameter: 500 mm Distance between bevel gear spindle and pinion spindle: 150 - 350 mm Distance between pinion spindle and front of bevel gear spindle: 120 - 340 mm Control system: GE FANUC Series 160i-M Chsdpfsvxwpujx Aaref Hypoid adjustment X-axis: +/- 70 mm Maximum pinion speed: 0 - 3,000 rpm Maximum bevel gear speed: 0 - 2,600 rpm Internal taper pinion spindle: Ø 99.2 mm Internal taper bevel gear spindle: Ø 99.2 mm Rated current: 30 A Machine weight: approx. 6.40 t Space requirements: approx. 2.40 x 2.20 x 2.10 m Integrated lapping fluid system Was additionally operated with a central lapping fluid supply

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), kesel-zahnstangenfraesmaschine-l79-2100-de-1986 Chedsx Auqaspfx Aarof

Kondisi: bekas, Tahun pembuatan: 2001, ts_01 Chjdpfx Asxz Avboarof

Kondisi: bekas, Tahun pembuatan: 2007, machineseeker-specification Chsdpexylm Hefx Aarof

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Chsdpov Ehbbofx Aarsf Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank rolling test device with 4-position index table - Spur gear - Internal gearing - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality assessment and classification) Workpiece data: Table load incl. mounting fixture, max. 100 kg Load on carrier plate/vertical slide incl. mounting fixture, max. 80 kg Workpiece diameter with counter support on measuring and infeed slide, max. 300 mm Workpiece diameter with counter support on machine bed, max. 300 mm Device data: Travel measurement system: Heidenhain LIF 101 Center distance min./max.: 45/300 mm Table diameter: 150 mm Table height above floor: 950 mm Cedpfxjv Ic R Ao Aarjhf Measuring pressure min./max.: 5/30 daN Total connected load of test device: 0.75 kVA Overall dimensions LxWxH: 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as several master gears with common modules included. Weight: 750 kg

Kondisi: bekas, Tahun pembuatan: 2008, Maximum transmission ratio 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height 20 mm Maximum tooth width 58 mm Grinding spindle speeds stepless up to 6000 rpm Workpiece spindle speed 1200 rpm Maximum tool diameter 230 mm Minimum tool diameter 69.85 mm X-axis 325 mm Y-axis 350 mm Z-axis 470 mm B-axis +90.1° / -1° Workpiece table - Ø 212.71 mm Control SIN 840 D SIEMENS Total power requirement 75 kW Machine weight approx. 10,000 kg Space requirements approx. 6.10 x 4.40 x 3.30 m Internal measuring probe Renishaw LP2 (X2; Y2 axis) Chodpevxwmtefx Aarof Hoffmann coolant filtration system HSF 100SE/K (year 2008) Tank capacity 2500 L VT oil mist filtration system

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 18.000 h, Fungsionalitas: berfungsi sepenuhnya, Like-new KLINGELNBERG VIPER 500 W Gear Grinding Machine All-inclusive machine, equipped for internal and external gearing Includes special power converter from EU kW to US connection (global plug-and-play compatibility) Available due to restructuring at a high-tech family-owned company (no automotive production) Csdpfx Aaoxx T N Tjrjhf Working range and capacities: - Max. workpiece diameter: 500 mm - Max. grinding stroke: 500 mm - Working area above table (min.–max.): 300 – 800 mm - Distance between spindle center and table (min.–max.): 442 – 1042 mm - Module (form grinding module): 0.5 – 22 - Swivel angle (min.–max.): –180° to +45° Grinding system: - Grinding wheel diameter (min.–max.): 221 – 350 mm - Grinding worm diameter (min.–max.): 221 – 350 mm - Max. grinding wheel width: 75 mm - Max. grinding worm width: 150 mm - Grinding spindle drive: 37 kW - Max. grinding wheel speed: 6000 rpm Table and feed rates: - Table diameter: 400 mm - Table bore Ø × depth: 100 × 500 mm - Max. table speed: 1000 rpm - Max. axial feed: 20,000 mm/min - Max. radial feed: 12,000 mm/min - Max. tangential feed: 20,000 mm/min Electrical connection and dimensions: - Total connected load: 60 kVA - Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm - Filter unit dimensions (L × W): 3490 × 2250 mm - Net weight approx.: 19,300 kg Machine configuration – VIPER 500 W Base machine and options: - VIPER 500 W base machine - Preparation for internal grinding arms - V5 internal grinding unit for straight or helical internal teeth - Measurement system for profile, flank line, and pitch of external gears - Measurement system for profile, flank line, and pitch of internal gears V5 - Touch trigger phasing system - Power supply with ESR voltage drop compensation - 100 mm table adapter - Preparation for hydraulic clamping devices - Hydromechanical unit for drawbar clamping systems - Grinding oil processing system with band filter 100 - Fire extinguishing system - Automatic working area door - Cleaning system with spray gun - Integrated crane/hoist in enclosure - Isolation transformer - Voltage stabilizer and isolation transformer - Signal lamp / signaling tower Software packages: - Gear PRO software - Software for spline shaft grinding - Software for spline shaft inspection - BIAS control software for gear grinding - CBN grinding wheel software - ADI dressing process optimization - DLC tool life monitoring for dressing tools - Flexible profile corrections for grinding operations Consumables: - Endless filter band - Assembly/disassembly tool for filter band 100 - Diamond dressing rolls - CVD dressing roll D200 R1 for profile grinding - Special CVD dressing roll for generating grinding - Grinding wheels - Grinding wheel D350 B60 for profile grinding - Grinding wheel D350 B45 for profile grinding - Profiled grinding wheel D350 B150 for generating grinding Distance rings / spacer plates: - 4 spacer plates B100 - 22 spacer plates B60 - 30 spacer plates B45 - 37 spacer plates B30 Other components: - Grinding wheel flange without spacer plate - Set of standard probes / measuring probes Additional options: - Warranty extension from 12 to 24 months - Closed Loop 1.0 basic version - Interface for external automation

Kondisi: bekas, Tahun pembuatan: 2008, hu20240616-01 Chedpfx Aoxz Akfearsf

Kondisi: baik (bekas), Tahun pembuatan: 1998, Spindle diameter: 90 mm Control system: Siemens SINUMERIK 840 C Operating voltage: 400 V Stroke position adjustment: 100 mm Chsdpfoxyadtsx Aarof Table bore: 150 mm Strokes per minute: 100-1200 strokes/min Machine weight approx.: 8.0 t Key specifications: Standard module: 6 mm Maximum workpiece pitch circle diameter: 250 mm Maximum gear width (spur gearing): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance between workpiece and reciprocating spindle: -80 mm to +320 mm Stroke position, stroke length, maximum stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Infinitely variable stroke rates (standard): 100 to 1200 DH/min Stroke drive motor: 9 kW Maximum cutting speed: 150 m/min Feeds Rotary axes (tool C1-, workpiece C2-axis): Infinitely variable feed, relative to 100 mm pitch circle diameter: 1.0 to 9,420 mm/min Radial axis (column slide X1-axis): Infinitely variable feed: 1.0 to 9,420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / Weight Total connected load: 26 kVA Total weight (standard configuration): approx. 9,000 kg

Kondisi: bekas, Tahun pembuatan: 2020, 1 Cjdpoxz Ahkofx Aarjhf