Beli kepala frais bekas (130)

Kondisi: bekas, Tahun pembuatan: 2005, 1 used, very well-preserved crankshaft milling unit for installation, e.g. on a lathe, for machining crankshafts and other milling operations Kdsdpfxeddziys Aa Nsg Manufacturer: SEMA, Made in Austria Model: SE 100 Year of manufacture: 2005 Technical Data: Spindle taper: ISO 50, concentricity / test arbor L=300 mm = 0.01 mm Speed range, infinitely variable: currently set to 2,000 rpm Spindle rated for up to 3,000 rpm Drive power: currently 15 kW Milling spindle rated for up to 25 kW Bearing diameter: 110 mm The 2 adapter plates bolted underneath the milling spindle are currently fastened. These plates can be used on your lathe, modified, or may need to be newly fabricated, depending on your requirements. Mounting surface of the milling spindle (L x W): 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the cross slide of your lathe • Infinitely variable speed adjustment, frequency inverter by LENZE, rated up to 30 kW • Forward / reverse operation • Permanently lubricated spindle bearings • Rigid construction with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via threaded spindle • Mobile trolley with control panel • Emergency stop • Lockable main switch Driver gearbox for the main spindle: • A long drive shaft is mounted in the spindle bore and connected to the gearbox • Infinitely variable speed adjustment, frequency inverter by LENZE • Forward / reverse operation • Jog mode: fast / slow The pictures show this unit installed on a Universal Lathe SARO SPA 10 x 3000 for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Tahun pembuatan: 2015, Machining accessories TOS - HUR 50 MACH-ID 2923 Manufacturer: TOS Model: HUR 50 Kjdpfxewvht Rj Aa Njdg Year of manufacture: 2015

Kondisi: sangat baik (bekas), en-forza-model-71510-boring-head Kdedpfeu Ndl Ijx Aa Neg FORZA 71510 Model – Boring FORZA MILLING HEAD – SPINDLE ONLY 85 mm The “spindle only” milling head is an essential component in machining operations, specifically designed to be the operational core of a milling head. This device is characterized by its robustness and precision, as it is responsible for clamping and rotating cutting tools such as end mills, drills, or reamers—excluding the chuck and tool holders. Its design allows for easy tool adjustment and changeover, making it an indispensable part of any milling process requiring high accuracy and efficiency. Manufactured from high-quality materials such as hardened steel, the spindle ensures tool stability during milling operations, minimizing vibrations and ensuring a high-quality surface finish on machined parts. Weight: 26.4 kg FORZA DRIVING CONES Ref. 714140 / 714150 The driving cones for milling heads are essential components in machining operations that require superior precision and stability. These cones are devices attached to the milling head to secure the workpiece or the cutting tool during the milling process. They are manufactured from high-strength materials such as hardened steel and are designed to withstand the high cutting forces generated during milling. CLAMP Diameter: 265 mm Inner diameter (edge to edge): 190 mm Distance between locating points: 108 mm Locating point diameter: 13 mm Edge diameter: 35 mm FORZA MILLING HEAD COLLETS – 14 mm / 10 mm / 7 mm

Kondisi: seperti baru (mesin pameran), Here you have the opportunity to purchase a straight, as-new boring and milling head. Technical Specifications: Manufacturer: Eppinger Article number: 7.073.250 DOOSAN part number: R78756A Ksdpfx Aasfiqbgo Nedg Transmission ratio: 1:1 Input speed: max. 3,500 rpm Output speed: max. 3,500 rpm Output torque: max. 210 Nm Coolant supply: external Orientation: straight Manufacturer’s list price: €1,791.00 plus statutory VAT. Clearance sale price: €800.00 plus statutory VAT. Compatible with the following machine tools: DMC DL 60 (M/LM) (BMT85) Doosan PUMA 600/700/800 (M,LM,XLM,XLY) (BMT85) PUMA VT1100 (M) (BMT85) PUMA VT900 (M,M-2SP) (BMT85) Hwacheon VT-950/1150 (BMT85) Hyundai WIA L600/L700/L800 (MA,LMA) (BMT85) LV1100 (RM7LM) (BMT85) WT1100 (BMT85) JOHNFORD GT / ST / LC Series (BMT85) SMEC PL 60/70/80 (M/LM) (BMT85) SL 65 (BMT85) Shipping within Germany including packaging: €35.00 net. Shipping outside Germany upon request. Enquiries for additional original DOOSAN tool holders for your CNC machine tool are welcome. We have over 1,000 spare parts in stock for you. Scope of delivery: see photos The sale is made under exclusion of any liability for material defects. Subject to technical changes, errors, and prior sale!

Kondisi: bekas, Kepala frais sudut 360° berputar penuh pada sumbu penggerak, dapat diputar maksimum. Tipe sambungan SK 50 Kdjdpfx Aajwv Spio Nog Kecepatan putar spindle maks. 3000 min-1 Dengan pendingin internal.

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range (rpm) Kdedpfsl Ichvox Aa Njg

Kondisi: bekas, Taper of milling spindle / Collet diameter / Speed range / rpm Kedpshprk Hjfx Aa Njdg For data, see images!

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range 1500 rpm Ksdpfehwt Elsx Aa Nodg

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 77WSX22305E5A-135, BENZ - MONO WSX 05 - Kepala Sudut 90° Kjdpfx Aaoyaabgj Nedg Interface: HSK-A100 Collet: ER25-A (Rentang penjepitan: 0,5–16 mm) Torsi maksimal: 30 Nm Kecepatan maksimal: 8.000 rpm Rasio transmisi: 1:1 Kepala sudut: dapat diatur 360° Berat: sekitar 8 kg Kepala sudut ini digunakan pada MAG HÜLLER HILLE - NBH6+, namun dapat diadaptasi atau disesuaikan untuk mesin lain.

Kondisi: baik (bekas), I am selling Benz angle heads. The price is per piece. Kodpfx Aov Up Hwea Nedg - 4-40370 - 4-40371

Kondisi: bekas, Tahun pembuatan: 1999, Cocok untuk misalnya mata bor 160 mm. Kondisi: baik. Ksdpfx Ajw Syg Tsa Nsdg

Kondisi: bekas, Cylindrical face mills, cylindrical cutters, milling cutters - Quantity: 8 pieces, finishing/roughing cutters - Arbor: Ø 40 mm - Various diameters: 120–125 mm Kdjdpfxsc Sr Ikj Aa Nog - Various manufacturers - Price: complete lot - Weight: 22 kg

Kondisi: bekas, Cylinder face mills, side and face mills, milling cutters - Quantity: 28 finish cutters/roughing cutters - Arbor hole: Ø 22 mm - Various diameters: 49-80 mm - Various manufacturers Kdsdpjc Sr Iuefx Aa Neg - Price: for the complete lot - Weight: 10.5 kg

Kondisi: bekas, Face milling cutter, indexable insert milling cutter, shell end milling cutter, tool holder, milling tool holder, milling tool -Diameter: 80 mm Kjdpfjcwb Nfjx Aa Nedg -Cutting height: 75 mm -Mount: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Quantity: 3 cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Kondisi: bekas, Cutting head, milling arbor, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein, Diameter 173 mm Kodpfsg T I Nzox Aa Nsdg -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Mount: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

Kondisi: bekas, Cylindrical gear cutters, side and face milling cutters, milling cutters - Quantity: 18 pieces finishing/roughing cutters - Bore: Ø 40 mm - Various diameters: 100–125 mm - Various manufacturers - Price: total Kdodpfec Sr Imox Aa Nog - Weight: 57.6 kg

Kondisi: bekas, Cylindrical face mill cutters, cylindrical cutters, milling cutters - Quantity: 9 pieces (finishing/roughing cutters) - Bore: Ø 32 mm - Various diameters: 76–100 mm - Various manufacturers - Price: for the complete set Kedpfoc Sr Ipex Aa Nodg - Weight: 13.3 kg

Kondisi: bekas, Cylindrical face mill, cylindrical cutter, milling cutter Ksdpfx Aaoc Sr Iqj Nsdg - Quantity: 12 pieces, finishing/roughing cutters - Arbor: Ø 32 mm - Various diameters: 75-110 mm - Various manufacturers - Price: complete lot - Weight: 21.3 kg

Kondisi: bekas, Cutter head, milling arbor, carbide milling cutter, indexable insert milling cutter - Delivery in as-is condition as inspected - Condition: see photos (not complete) - Diameter: 325 mm - Inserts: carbide Ksdpfec Svm Usx Aa Njdg - Mount: SK50 - Dimensions: 325/325/H210 mm - Weight: 28.8 kg

Kondisi: bekas, e721ea28 Kodpjfvcxzjfx Aa Nsdg

Kondisi: bekas, Milling cutter head, milling arbor, solid carbide milling cutter, indexable insert milling cutter, face milling head, milling head, shell-end milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Mounting: Ø 50 mm / bolt circle Ø 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg Kdsdpou Ridljfx Aa Nog

Kondisi: baik (bekas), Main spindle motor, milling spindle, spindle motor, AC spindle motor, electric motor, DC motor, servo motor, milling motor - Application: Milling/Drilling - Spindle motor: was temporarily used for testing on a robot - Operating hours: 4,350 h - Spindle motor power: 55 kW - Servo drive: Lenze Servo Drives 9400 - Tool holder: HSK32 - Hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 - Spindle cooling BKW Type: WRK07/PC41 - Control cables - Dimensions of control cabinet: 1118/800/H2430 mm Kjdedntf Hopfx Aa Nsdg - Weight: 694 kg

Kondisi: baik (bekas), Gear cutters, module cutters, hob cutters, involute gear cutters, module cutter heads, end mill cutters, cylindrical cutters, milling cutters, gear hobs, spline hobs Ksdpsgd Uv Dsfx Aa Nsdg - Manufacturer: WMW PWS, 17 gear hobs included - Shank diameters: Ø 27 mm (4 pcs), Ø 32 mm (7 pcs), Ø 40 mm (6 pcs) - Various types: see photos, additional pictures available on request - Price: complete set - Dimensions: 400/400/H150 mm - Total weight: 52.5 kg

Kondisi: baik (bekas), Gear cutters, module cutters, hob cutters, involute gear cutters, module milling head, cylindrical face milling cutters, cylindrical cutters, milling cutters, hobbing cutters, spline hobbing cutters - Manufacturer: Fette/JAL, 23 pieces of hobbing cutters - Shank: Ø 16 mm (13 pcs), Ø 22 mm (4 pcs), Ø 27 mm (6 pcs) Ksdpfsgfcnkox Aa Nsdg - Various types: see photos, additional pictures available upon request - Price: complete set - Dimensions: 250/170/H90 mm - Total weight: 9.8 kg

Kondisi: baik (bekas), Disc end mill, indexable insert milling cutter, shell end mill, tool holder, milling arbor, milling tool, internal deburring tool - For diameters: 20 - 60 mm - Arbor: Morse taper 3 (MK 3) - Quantity: 1 piece internal chamfering cutter available Kdjdpfod Sdl Iox Aa Njg - Price: per piece - Dimensions: Ø 70/208 mm - Weight: 1.7 kg/piece