Beli Rak kantilever bekas (93)

Kondisi: baru, Tahun pembuatan: 2020, en Fpsljxrzg Hehccqqsp

Kondisi: baik (bekas),

Kondisi: bekas, Rak penyimpanan tipe cantilever dua sisi untuk barang batang/bilahan (rak buatan sendiri) Tinggi konstruksi: 1,9 meter Panjang rak: 4,3 meter Jarak antar tiang: 2000 mm Penopang material: 600 / 500 / 450 dan 400 mm Kapasitas beban per penopang: sekitar 200 kg Kapasitas beban per tingkat (beban rak dengan 3 tiang): sekitar 600 kg Kapasitas beban total dengan 3 tiang: sekitar 4.800 kg Lebar kaki: 1.000 mm - 3 tiang = 2 bidang = Ideal untuk batang dengan panjang 6 meter - Tiang dari profil U 100 x 50 x 9 mm - Lengan penyangga dari profil U 100 x 50 x 7 mm - 8 penopang per tiang (total 24 lengan penyangga dilas) - 3 tiang dua sisi dengan kaki bawah - Sambungan tiang menggunakan pipa kotak yang dibaut - Pengikat diagonal tidak ada Felhcjxf Ut Hjcqqepp Kebutuhan ruang setelah dirakit (P x L x T): 4400 x 1450 x 1900 mm Kebutuhan ruang saat pengiriman (P x L x T): 2100 x 1500 x 500 mm Total berat: 350 kg

Kondisi: sangat baik (bekas), Cantilever transport trolley Workshop trolley Height: 1650 mm Fpjlhccqjpkx Scoqsp Width: 780 mm Depth: 600 mm Length of support arms: 300 mm Robust construction

Kondisi: hampir baru (bekas), Rak gudang tipe cantilever hampir baru, satu sisi dan dua sisi, tersedia dari stok untuk dijual. Tanda bekas pemuatan mungkin terlihat pada sistem. Jumlah tersedia: 20 unit Ukuran sistem: Lengan: alas + 5 lengan, panjang 80 cm Kapasitas beban: 160 kg/kolom Kolom: 4 unit, tinggi 2500 mm, jarak antar kolom 90 cm Kapasitas beban: 1000 kg/kolom Fpolhccqsxcn Ekoqop Total panjang sistem: 3300 mm Total kedalaman sistem: 1100 mm

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Mixer lab Z-arm kecil / mixer sigma ganda Jaket ganda => pemanasan dengan air panas atau minyak panas dimungkinkan Fpslhccjxlrakjqqsp

Kondisi: baru, Double-Sided Cantilever Rack, New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New stock direct from factory - Double-sided - 500 kg load capacity per arm - 2250 kg load capacity per upright Fslhccexrzgyoqqspp - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels total) - Delivery time approx. 4 weeks Rack includes: - 15 x double-sided uprights, incl. base, approx. 400 cm made from IPE160 - 120 x cantilever arms, approx. 120 cm, made from IPE80, without deflectors - Includes all necessary connectors and bolts Why BLT cantilever racking? - Certified German manufacturer per DIN EN 1090 – Made in Germany - All specified load capacities of the rack uprights and arms are statically verifiable at 100% load - All racking units are supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and resistant to rusting unlike painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term availability of replacement parts guaranteed - Upright base and back are welded together for extra safety and reduced assembly times (no need to bolt base and back together) - Bracing made from angle steel eliminates the need for turnbuckles, thereby reducing assembly time - No slotted hole system, thus no weakening of the upright profile Price: €12,450 net, plus applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our logistics partner upon request. Costs depend on the destination postal code. Assembly: Our trained staff are happy to assist with professional installation and dismantling of your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning and ordering to final assembly.

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Set components: 4 uprights with 5 arms each / 3 bays with connectors Fpelhccsxbz Ddeqqop Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Kondisi: baru, Load capacity rack: 14,000 kg Load capacity per level: 2,000 kg Number of loading levels: 7 pcs. Recommended material length: 6,000 mm Bay width: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m Fjlhccefgyg Djqqepp The ideal solution for storing long materials with 2 uprights. - Each compartment can be swung outward, allowing loading and unloading with an overhead crane at any time. - Single-sided design.

Kondisi: sangat baik (bekas), Rak cantilever, dua sisi, 10 tingkat, lengan dengan overhang 380 mm, dapat diperpanjang 220 mm, tinggi 2420 mm, kedalaman total 1000 mm, panjang sekitar 2700 mm, lengan cantilever dari baja-U 80 mm, konstruksi sangat kokoh, rak dilapisi galvanis panas, berat 1190 kg, rak dibongkar untuk transportasi. Fpelhsw Icyusccqqsp

Kondisi: baru, Custom-sized cantilever racking! Ideal for storing your long goods. Easy access to your products thanks to single-sided or double-sided configurations. Modular system allows you to add elements as your storage needs grow. Perfect for offcuts or long goods in metalworking and woodworking operations. Why choose BLT cantilever racking? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All stated load capacities of uprights and arms are statically tested to withstand 100% loading • All racking systems are supplied hot-dip galvanized—suitable for indoor or outdoor use, and resistant to rust unlike painted systems. Consistent appearance for many years • We use legally required hot-dip galvanized bolt kits according to DIN EN 15048-1 • We use legally required load signs C4, per DIN EN 15635 / BGR 234 • Long-term availability guarantee for replacement parts • Upright foot and upright spine are welded together for added safety and reduced assembly time—no need to bolt feet separately • Bracing made from angle steel—no tension rods required, which shortens installation time Foljxrzgmohccqqspp • No slotted hole system—preserves the integrity of the upright profile Transport: Delivery available through our partner freight forwarders on request—costs depend on your postal code Assembly: Our trained staff are available for professional assembly and disassembly of your facility upon request Our recommendation: Let us know your requirements... We are happy to support you in realizing your project—from planning and ordering to installation Interested or have questions? Contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us Monday to Friday, 08:00 - 15:00 Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baru, Load capacity per rack: 12,000 kg Load capacity per level: 2,000 kg Number of storage levels: 6 pcs. Fslefgyg Rjhccqqspp Recommended material length: 3,000 mm Frame width: 1,500 mm Rack height: 2,440 mm Dimensions (L x W x H): 2.3 x 0.9 (1.35) x 2.45 m The optimal solution for storing long materials with two columns. - Each compartment can be swung outwards, allowing for loading and unloading with an overhead crane at any time. - Single-sided design. Galvanised tray made from 2 mm steel sheet, length 3,000 mm: €301 Galvanised tray made from 2 mm steel sheet, length 3,000 mm, with cut-out: €333 Separator for tray, steel: €54.00 Separator for arm, steel: €54.00 Separator for tray, stainless steel: €69.00 Separator for arm, stainless steel: €69.00

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW equipment immediately available from stock - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized - Cantilever arms are hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) The rack consists of: - 04 x uprights, incl. base, approx. 350 cm made of IPE160 Fslhccqjxrzgajqspp - 12 x cantilever arms, approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are delivered hot-dip galvanized. Therefore, they can be installed indoors or outdoors and do not rust as painted systems do. Consistent appearance for many years. - We use legally prescribed hot-dip galvanized bolting systems according to DIN EN 15048-1 - Long-term repurchase guarantee - Upright foot and upright back are welded together, providing additional safety and short assembly times as the feet do not need to be bolted separately to the upright back - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, shortening assembly time - No slotted hole system, thus no weakening of the upright profile Price: €2,356.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner shipping company upon request; costs depend on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Kondisi: baru, Load capacity per rack: 20,000 kg Load capacity per level: 2,000 kg Number of storage levels: 2 x 5 units Recommended material length: 6,000 mm Upright spacing: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m The ideal solution for storing long materials with 2 columns. - Each compartment can be swung outwards, allowing for loading and unloading with an overhead crane at any time. - Double-sided design. Galvanized tray made from 2 mm steel sheet, length 4000 mm – €344 Galvanized tray made from 2 mm steel sheet, length 4000 mm, with cut-out – €387 Divider for tray, steel – €54.00 Fpjlofgyg Tshccqqsp Divider for arm, steel – €54.00 Divider for tray, stainless steel – €69.00 Divider for arm, stainless steel – €69.00

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking NEW Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW stock, immediately available. - 750 kg load capacity per arm - 2250 kg load capacity per column - Columns hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 levels) Felhsxrzf Nsccqqopp Rack includes: - 04 x columns including base, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE100 - All necessary connecting elements and bolts included Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for rack columns and cantilever arms are statically verifiable at 100% load - All racks are supplied hot-dip galvanized, suitable for indoor and outdoor use, no corrosion as with painted systems, maintains appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term spare parts availability - Column base and column back are welded together, offering additional safety and reduced installation time, as the bases do not need to be bolted to the column back - Bracing made from angle steel, so no adjustment by turnbuckles is necessary, which reduces assembly time - No slotted hole system, so the column profile is not weakened Price: €2,631.00 net + VAT as applicable You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Our recommendation: Let us know your requirements... We are happy to assist you with your project, from planning and ordering to assembly. Delivery available at attractive rates upon request.

Kondisi: baru, Load capacity rack 24,000 kg Load capacity per level 2,000 kg Number of loading levels 2 x 6 units Recommended material length 3,000 mm Column spacing 1,500 mm Rack height 2,440 mm Dimensions L x W x H m The most suitable solution for storing long materials with 2 columns. Fpjlhccofgyhgeqqep - Each compartment can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Double-sided design. Galvanized tray made of 2 mm steel sheet, length 3,000 mm 301 EUR Galvanized tray made of 2 mm steel sheet, length 3,000 mm, with cutout 333 EUR Divider for tray, steel 54.00 EUR Divider for arm, steel 54.00 EUR Divider for tray, stainless steel 69.00 EUR Divider for arm, stainless steel 69.00 EUR

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelves, 60 cm deep, Height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - NEW stock, available immediately - Load capacity: 140 kg per arm - Load capacity: 1120 kg per upright - Uprights finished in RAL5010 (gentian blue) - Cantilever arms finished in RAL5010 (gentian blue) - Arms are hooked in and secured with safety bolts Fslhcjxrzdrocqqspp - Arms adjustable in 70 mm increments - Levels: base + 4 storage levels (5 storage levels in total) Rack consists of: - 04 x uprights, incl. base, approx. 250 cm made of IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and screws -- Available Immediately -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery available upon request via our partner freight forwarder. Costs depend on the delivery postcode. Assembly: Our trained staff are available to assist with the professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning to ordering and installation.

Kondisi: baru, Shelf load capacity 6600 kg Load capacity per level 1100 kg Number of storage levels 6 pcs. Recommended material length 6000 mm Frame width 2 x 2000 mm Rack height 2440 mm Compartment width 800 mm The most suitable solution for storing long materials with 3 columns. Folhcsfgyhiocqqopp - Each compartment can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Single-sided design. - Compartment depth 800 mm.

Kondisi: baru, kapasitas angkut per lengan kantilever: 650 kg, tinggi rak: 4.000 mm, panjang total: 4.000 mm, lebar total: 1.480 mm, kapasitas beban per penyangga: 1.950 kg, EN-01 Fpslhjxrzdleccqqsp

Kondisi: baru, Shelf load capacity 12,000 kg Shelf load per level 2,000 kg Number of storage levels 6 pcs. Recommended material length 6,000 mm Upright width 3,000 mm Shelf height 2,440 mm Fpelhsfgyg Asccqqop Dimensions (L x W x H) 3.8 x 0.9 (1.35) x 2.45 m The optimal solution for storing long materials with two uprights. - Each compartment can be swung out, allowing for easy loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made of 2 mm sheet steel, length 4,000 mm: 344 EUR Galvanized tray made of 2 mm sheet steel, length 4,000 mm, with cut-out: 387 EUR Divider for tray, steel: 54.00 EUR Divider for arm, steel: 54.00 EUR Divider for tray, stainless steel: 69.00 EUR Divider for arm, stainless steel: 69.00 EUR

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 400 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from warehouse - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 04 x uprights incl. base, approx. 400 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 80 - Incl. all necessary connectors and bolts Felhccqoxrzcueqspp Why choose BLT cantilever racking? - Certified German manufacturer to DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load - All racking systems are supplied as hot-dip galvanized units, suitable for indoor and outdoor use without rusting like painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets as per DIN EN 15048-1 - Long-term availability guarantee for replacements - Base plates and rear uprights are welded together for added safety and reduced assembly time—bases do not need to be bolted separately - Cross bracing made of angle steel, so no tensioning devices or turnbuckles are necessary, reducing assembly time - No slotted hole system, so the upright profile strength is not compromised Price: €2,462.00 net + statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged upon request by our partner carrier; costs are dependent on postcode. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your workplace equipment if required. Our recommendation: Let us know your requirements... We are happy to assist with your projects, from planning and ordering through to installation.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW immediately available from stock. - Load capacity: 500 kg per arm - Load capacity: 2250 kg per upright Fpjlhccqoxrzcnsqep - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking system consists of: - 04 x uprights, including base, approx. 300 cm from IPE160 - 12 x cantilever arms, approx. 120 cm from IPE 80 - Including all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use; unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1. - Long-term repurchase guarantee. - Upright base and upright back are welded together for additional safety and reduced installation times, as feet do not need to be bolted to the upright back. - Bracing made from angle steel, eliminating the need for turnbuckle tensioning. This reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,265.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery available on request by our partner carrier; costs depend on postcode. Assembly: Our trained staff are available to professionally assemble or dismantle your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, lebar total: 810 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 560 kg, Approx. 3.15 linear meters Cantilever Rack H: 250 cm 140 kg/arm META Multistrong Feloxrzcbohccqqopp Specifications: - H: approx. 250 cm - D: approx. 81 cm - L: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - BRAND NEW, immediately available from stock. - Load capacity per arm: 140 kg - Load capacity per upright: 1120 kg - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: base + 4 storage levels (5 storage levels total) The rack consists of: - 04 x uprights incl. base, approx. 250 cm, made from IPE120. - 16 x cantilever arms, approx. 60 cm, made from rectangular tube 40 x 30 mm. - Incl. all necessary connecting elements and bolts. -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. are also available from us. Shipping: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements ... We are happy to support you with your projects, from planning and ordering to installation.

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking – Brand New Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Arm length: approx. 120 cm - Axle spacing: 131 cm - Brand new, available immediately from stock. - Load capacity: 500 kg per arm Fjlhcjxrzb Dscqqspp - Load capacity: 2,250 kg per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (total 4 storage levels) Racking consists of: - 4 x uprights incl. foot, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE 80 - Includes all necessary connecting elements and bolts. Why BLT Cantilever Racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load. - All racking systems supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fasteners per DIN EN 15048-1. - Long-term availability guarantee for spare parts. - Upright base and upright back are welded together for added safety and reduced assembly time, as the base does not need to be bolted separately. - Bracing made from angle steel – no adjustment via turnbuckles required, thus reducing assembly time. - No slotted hole system, so the upright profile is not weakened. Price: €2,578.00 net + statutory VAT. You will receive an invoice showing VAT. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery is available via our partner freight forwarder upon request, costs are based on postal code. Assembly: Our trained staff is available to assist you with the professional assembly and disassembly of your facility as needed. Our Recommendation: Tell us about your requirements... We are happy to support your projects – from planning and ordering to installation.

Kondisi: baru, Cantilever rack, new – H: 400 cm, base + 3 storage levels with roof & rear wall Delivery free to your door within Germany, excluding islands Technical data: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever arms: approx. 125 cm - Axle spacing: 290 cm (can be adjusted as per customer requirements) - New product – made in Germany - Delivery time: approx. 6 weeks after commercial clarification - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized Fpjlhccjxrzbqoqqsp - Arms are bolted - Arms adjustable in a 200 mm grid - Levels: base + 3 storage levels (4 storage levels in total) Rack consists of: - 06 x uprights incl. base, approx. 400 cm, made of IPE 270 - 18 x cantilever arms approx. 125 cm, made of IPE 120 - 06 x roof beams approx. 150 cm, made of IPE 120, roof slope rising 5° - incl. material for roof and rear wall - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities of uprights and arms are statically verifiable at 100% loading - All racking systems are supplied hot-dip galvanized. This allows set-up both indoors and outdoors, and they will not rust like painted systems—consistent appearance for years - We use legally prescribed hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - The upright base and back are welded together for extra safety and reduced assembly time, as there is no need to bolt them together separately - Bracing made from angle steel, eliminating the need for turnbuckles; this reduces installation time - No slotted hole system—no weakening of the upright profile Price: €12,250 net plus statutory VAT. You will receive an invoice with VAT shown separately. Assembly: Our trained staff will gladly assist you with the professional assembly and dismantling of your facility if needed. Our recommendation: Let us know your requirements... We are happy to support you from planning, ordering, through to assembly.