Beli Printer 3D bekas (157)

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 200 h, panjang total: 2.128 mm, lebar total: 1.294 mm, tegangan masuk: 400 V, masa garansi: 6 bulan, arus masuk: 32 A, daya laser: 100 W, kapasitas tangki: 32 l, laju aliran volumetrik: 20 m³/jam, Sistem sinter laser poliamida termasuk dua wadah pertukaran dan stasiun pembongkaran. Mesin dapat dilihat dan diuji kapan saja di BIBUS-Austria-Democenter. Selain itu, sistem ini memiliki fitur quick-change system antara pisau penarik dan rol coater – sistem ini selalu berada pada standar teknologi terbaru karena pembaruan rutin telah dilakukan. Bjdpfx Asqwkypopcowp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, tinggi total: 1.065 mm, lebar total: 645 mm, berat keseluruhan: 114 kg, jarak pergerakan sumbu X: 165 mm, panjang produk (maks.): 685 mm, jumlah sumbu: 3, Plastic 3D Printer, manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a ytterbium fiber laser and can produce parts up to a maximum size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in/hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) Bwodsy Sy Nvjpfx Apcjp • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm (165.5 cm with stand) • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28°C (68 to 82°F), ≤30% humidity • Internal temperature: 200°C (392°F) • Temperature control: Quartz tube heating elements, PTC cartridges • Air treatment: Pressure-controlled two-stage filtration, HEPA and carbon filters • Power requirements: EU 230 VAC 7.5A, US 120 VAC 15A • Galvanometer: Formlabs proprietary • Laser wavelength: 1065 nm • Laser power max: 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000 Mbit, USB 2.0 • Touchscreen: 10.1" 1280 x 800 • Controller: Brand Formlabs • Note: The display is damaged, but this does not affect functionality Fuse Sift OPTIONAL: Fuse Sift (price upon request) • Fuse Sift dimensions: 99.1 × 61.0 × 188.8 cm (39.0 × 24.0 × 61.8 in) • Fuse Sift weight: 93 kg (without build chamber or powder) (205 lb) • Build chamber dimensions: 27.9 × 34.2 × 48.9 cm (11.0 × 13.5 × 19.3 in) • Build chamber weight: 11 kg (17.6 kg filled with 20% packed powder) (24.3 lb, 38.8 lb) • Build volume: 16.5 × 16.5 × 30.0 cm (6.5 × 6.5 × 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26°C (68 to 80°F), ≤30% humidity • Air management: negative pressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5A dedicated circuit, US 120 VAC 15A dedicated circuit • Power requirements for high-performance vacuum: EU 230 VAC 10A, US 120 VAC 20A • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB

Kondisi: baru, Tahun pembuatan: 2022, Erittäin nopea 3D-muovitulostin Erittäin nopea 3D-muovitulostin (tulostustila 275x155x400 mm) teolliseen käyttöön ja oppimisympäristöihin, jossa on nopea materiaalinvaihto ja laaja, yli kahdenkymmenen tulostusmateriaalin valikoima. Haasta ruiskuvalun nopeus ja laatu sekä hyödynnä työkaluton ylivertainen joustavuus! Koko metallinen tulostusjärjestelmä sisältäen: - 3D-muovitulostin - x-Wash Tuotteiden pesu - x-Cure Tulosteiden kovetus NexaX v1 -ohjelmisto: Helppo tulostuksen hallinta ja etäohjaus, työnhallinta, jonot ja tilastot Tämä on täysi järjestelmä, johon sisältyy 3D-tulostin, pesuasema ja kovetuslaite. Bwedotucr Ijpfx Apcjp Materiaalit: KeyGuide, KeyModel Ultra – Ivory, KeyModel Ultra – Light Gray, KeyOrtho IBT, KeySplint Hard, KeySplint Soft, KeyTray, PRO9499 White, Saremco Print CROWNTEC, xABS3843, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xCERAMIC3280, xDENT201-Gray, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xMODEL15-Gray, xMODEL17-Clear, xMODEL35-Black, xMODEL35-Gray, xMOLD, xPEEK147, xPP405-Black, xPRO1100-Black, xPRO9400-FR

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 342 h, jarak pergerakan sumbu X: 255 mm, jarak lintasan sumbu Y: 252 mm, jarak gerak sumbu Z: 200 mm, jumlah sumbu: 3, el Bjdey Sarwspfx Apcowp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 16.330 h, tinggi total: 1.984 mm, lebar total: 1.270 mm, jarak pergerakan sumbu X: 406 mm, jarak lintasan sumbu Y: 355 mm, jarak gerak sumbu Z: 406 mm, panjang produk (maks.): 902 mm, jumlah sumbu: 3, en Bwsdpfey R A Urjx Apcep

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, arus masuk: 13 A, frekuensi input: 60 Hz, Kami menawarkan printer 3D bekas Stratasys Objet350 Connex3 ini, tahun produksi 2019. Model: Objet350 Connex3 Nomor Seri: 370192 Tahun Produksi: 2019 Tegangan daya: 100–120 V Tegangan daya: 200–240 V Arus nominal: 13,5 A Arus nominal: 7 A Frekuensi: 50–60 Hz Jumlah fasa: 1 Beban arus jangka pendek: 1000 A Bjdsyzq Nlepfx Apcjwp Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami melalui telepon.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, panjang total: 1.290 mm, tinggi total: 1.980 mm, lebar total: 900 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 658 kg, tegangan masuk: 240 V, arus masuk: 40 A, suhu: 160 °C, frekuensi input: 50 Hz, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 30 °C, akurasi pemposisian: 0,127 mm, sekring listrik: 40 A, akurasi pengulangan: 0,05 mm, panjang pemakanan sumbu X: 406 mm, panjang umpan sumbu Y: 355 mm, panjang umpan sumbu Z: 406 mm, persyaratan ruang panjang: 2.000 mm, kebutuhan tinggi: 2.200 mm, tingkat kebisingan: 65 dB, lebar yang dibutuhkan: 1.500 mm, Stampante 3D industriale ad alte prestazioni basata su tecnologia FDM, progettata per la prototipazione funzionale e la produzione in piccoli lotti tramite termoplastici ingegneristici certificati. Bwsdey Ug Ecspfx Apcjp La Stratasys Fortus 450mc è una piattaforma consolidata per aziende che richiedono ripetibilità, stabilità dimensionale e tracciabilità dei materiali, rendendola ideale nei settori automotive, aerospaziale, della meccanica industriale e per laboratori di ricerca avanzata. Il sistema dispone di teste di estrusione doppie in modalità materiali aperti, consentendo flessibilità avanzata di processo e compatibilità con una più ampia gamma di termoplastici specifici FDM, previa ottimizzazione dei parametri e rispetto dei limiti termici della piattaforma. Caratteristiche principali: - Camera di costruzione riscaldata (fino a ~180°C) per una superiore adesione tra gli strati e riduzione delle deformazioni - Ripetibilità a livello industriale per parti funzionali e destinate all’utilizzo finale - Ampio volume di stampa: 406 × 355 × 406 mm - Sistema di estrusione doppia (materiale + supporto solubile) - Sistema di materiali chiuso per la stabilità e la coerenza del processo - Compatibile con il software Insight per un avanzato controllo del processo di stampa Materiali supportati: 🔹 Polimeri standard e funzionali ABS-M30 → prototipazione funzionale robusta ASA → applicazioni outdoor resistenti ai raggi UV ABS-ESD7 → componenti a dissipazione elettrostatica 🔹 Polimeri ad alte prestazioni PC (Policarbonato) → resistenza all’impatto elevata PC-ABS → equilibrio tra robustezza e processabilità 🔹 Materiali tecnici avanzati Nylon 12 (PA12) → resistenza all’usura e durevolezza sotto fatica Nylon 12CF (rinforzato fibra di carbonio) → maggiore rigidità e stabilità dimensionale 🔹 Termoplastici per aerospazio ULTEM 9085 → conforme FST (fiamma, fumo, tossicità) ULTEM 1010 → massima resistenza termica e meccanica

Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 570115, Tahun pembuatan: 2013, jam operasional: 928 h, panjang total: 1.400 mm, tinggi total: 1.260 mm, lebar total: 1.100 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 430 kg, tegangan masuk: 230 V, For sale: Stratasys Objet500 PolyJet 3D printer. This machine is explicitly offered as defective / in need of repair, as several print heads must be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet utilizes liquid photopolymer, which is applied layer by layer through print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional samples, molds, jigs, fixtures, and components with fine surface quality. Once repaired, the machine is suitable for professional applications in rapid prototyping, product development, model making, design, medical technology, engineering, and small-series manufacturing. Depending on the configuration of the Objet500 series, multi-material and digital material applications are also possible. Stratasys describes the Objet500 Connex family as a triple-jetting platform with various material and color or material combination capabilities. Condition: Defective / in need of repair. To the best of our knowledge, some print heads must be replaced. Therefore, the machine is expressly sold without any functional guarantee. Commissioning or repair should be carried out exclusively by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by appointment. The machine may be of interest as a repair project, a donor for spare parts, or for recommissioning by a specialist company. Technical specifications (according to manufacturer data for the Objet500 series): Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 microns Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Bjdpey Uwlaefx Apcjwp Material cabinet weight: approx. 76 kg Power supply depending on model: 100–120 V or 220–240 V, 50/60 Hz, single-phase Support material depending on system: SUP705 / SUP706B, depending on configuration and material approval The technical information is based on publicly available manufacturer and support data for the Stratasys Objet500 series. Stratasys specifies a build volume of 490 × 390 × 200 mm for the Objet500 Connex 1-2-3; weight and system dimensions are listed in datasheets at approx. 430 kg and 1,400 × 1,260 × 1,100 mm, respectively. Note on defect: The machine is not being sold as operational. Known issue: print heads need replacement. Other faults cannot be ruled out. Therefore, the sale is expressly as a defective used machine / for repair / for spare parts. Terms and conditions of sale: Sale exclusively to businesses/traders. The machine is sold as a used machine, as described and/or as viewed, with exclusion of any liability for material defects/warranty. No guarantee is provided. Subject to errors and prior sale. Inspection possible by appointment only. Sale ex location.

Kondisi: bekas, Tahun pembuatan: 2014, Minta informasi tambahan! Versi UE. Bodpfxsy Ud Ihe Apcswp

Kondisi: bekas, DWS DigitalWax 029X Bwjdpfxoy Ud Hwo Apcsp Tahun pembuatan: 07/2020 Laser: Kelas 3 Tegangan: 110–230V, 50–60 Hz Daya: 400W

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ZanyTapir, Tahun pembuatan: 2025, jam operasional: 251 h, panjang total: 700 mm, tinggi total: 1.600 mm, lebar total: 700 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 120 kg, tegangan masuk: 230 V, Complete set consisting of Fuse 1, Fuse Blast, Fuse Sift, Mini 5-5 RG40104 and IVR 35/20-2 Sc Me For sale is a complete machinery/system set in as-new condition, comprising several precisely matched components. Scope of delivery / Set includes: - Fuse 1 - Fuse Blast - Fuse Sift - Mini 5-5 RG40104 - IVR 35/20-2 Sc Me The set is ideally suited for use in production, workshop, or industrial environments. The components are offered together as a complete set and are all in an exceptionally well-maintained, like-new condition. The nitrogen generator Mini 5-5 RG40104 is required for operation or for printing with white powder. A suitable compressor is available in a separate listing if required. Condition: As new Availability: Immediately / by arrangement Collection / Shipping: By agreement All details are provided to the best of our knowledge and belief. Subject to prior sale and errors excepted. Bsdjy Uvikspfx Apcowp If you are interested or have any questions, please do not hesitate to contact us. We will be happy to provide additional photos or information upon request. Sales Conditions: Sale exclusively to commercial customers/businesses. The machine is sold as a used machine as described or as inspected, with exclusion of any liability for material defects/warranty. No guarantee will be provided. Subject to errors and prior sale. Inspection possible by appointment. Sale is ex-location.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G1850438, jam operasional: 675 h, panjang total: 1.400 mm, tinggi total: 1.100 mm, lebar total: 1.260 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 430 kg, tegangan masuk: 220 V, arus masuk: 7 A, lebar meja: 390 mm, panjang meja: 490 mm, Stratasys J850 Digital Anatomy – Professional PolyJet 3D Printer for Medical and Anatomical Models For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for the production of realistic medical, anatomical, and functional models. This machine is ideal for clinics, medical technology companies, research institutions, universities, dental/medical labs, as well as 3D printing and prototyping service providers. The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness levels in a single print process. This allows for the highly realistic representation of anatomical structures such as bones, vessels, tissues, organs, and transparent areas. Typical applications include surgical planning, training, demonstration models, product development in medical technology, and patient-specific models. Technical Specifications / Additional Information: - Total printing time: 675 hours - Technology: PolyJet / Multi-material 3D printing Bwjdpfey Urwwjx Apcop - Layer thickness: down to 14 µm - Multi-material printing with up to 7 base materials - Full-color and transparent printing possible - Software: GrabCAD Print / GrabCAD Voxel Print - Network connection: LAN / TCP-IP - Suitable for Digital Anatomy materials including TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials Condition / Storage Notice: The machine is currently dismantled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. Therefore, the machine has been properly prepared for transport and storage. Special Features: - Realistic haptics and appearance of anatomical models - Very high level of detail and fine surface quality - Printing of flexible, rigid, transparent, and colored areas within a single model - Ideal for medical training, surgical preparation, and product development - Industrial Stratasys quality - Large build area for complex models and small batch production - Professionally flushed and prepared for transport/storage The machine is particularly well-suited for users looking to produce high-quality medical models, demonstrators, implant/instrument prototypes, or highly realistic training models. Sales Conditions: Sale exclusively to commercial customers/businesses. The machine is being sold as a used machine, as described or as inspected, with all liability for material defects and warranties excluded. No guarantee is provided. Errors and prior sale reserved. Inspection by appointment possible. Sale is ex location.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 16.000 h, STRATASYS Fortus 450mc (Gen2) – Masih Bergaransi Mesin dalam kondisi sangat baik: - Pemeliharaan preventif tahunan Stratasys telah dilakukan (12, 24, dan 48 bulan). - Upgrade pengering udara dari Gen 2 ke Gen 3. - Garansi pabrikan Stratasys (tidak termasuk bahan habis pakai) berlaku hingga 15 Oktober 2026. - Lisensi Material Lengkap: Standar, Teknik, Performa Tinggi, dan Material Validasi Stratasys. Demo dan pelatihan tersedia di lokasi di Lille, Perancis. Disertakan: - Transformator tiga fasa. - Bahan habis pakai BARU: - 1x ASA Hitam - 1x ULTEM™ 9085 Hitam - 1x SR30 Support - Nozzle T16 - Lembaran bangun Harga: €29.000 (belum termasuk PPN) Layanan opsional: - Pengiriman / Instalasi / Pelatihan sesuai lokasi tujuan - Bahan bekas tambahan tersedia (ULTEM™, PC, dll.) Deskripsi Cetak komponen dengan ukuran hingga 406 x 355 x 406 mm. Manfaatkan manufaktur aditif FDM industri dengan kecepatan, fleksibilitas material, dan efisiensi biaya yang optimal. Fortus 450mc menghadirkan performa presisi dan andal untuk membantu transformasi rantai pasok, mempercepat produksi, serta menurunkan biaya manufaktur. Reputasi keandalannya yang sudah terbukti dan kompatibilitas terhadap berbagai termoplastik menjadikannya solusi 3D printing terpercaya bagi pelaku industri penerbangan, otomotif, kereta api, minyak & gas, serta produk komersial. Fortus 450mc juga dapat dioperasikan sebagai sistem terbuka saat digunakan dengan OpenAM Material License dan perangkat lunak terkait. Opsi ini memungkinkan pengguna mengatur parameter pencetakan guna mengoptimalkan performa material sesuai aplikasi spesifik. Bwedpoy U Hh Refx Apcjp Selain itu, sistem ini mendukung Stratasys Validated Materials yang dikembangkan bersama pemasok pihak ketiga, memperluas ketersediaan material dan memungkinkan lebih banyak variasi aplikasi.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 556 h, panjang total: 483 mm, tinggi total: 914 mm, lebar total: 584 mm, jenis arus masuk: Arus searah (DC), berat keseluruhan: 48 kg, masa garansi: 16 bulan, panjang pemakanan sumbu X: 330 mm, panjang umpan sumbu Y: 270 mm, panjang umpan sumbu Z: 200 mm, en Bsdpfx Aoydmnbjpcswp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, panjang total: 2.210 mm, tinggi total: 1.448 mm, lebar total: 1.238 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, de Bwjdpsy U H Idofx Apcop

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 155-10000, Tahun pembuatan: 2014, panjang total: 1.281 mm, tinggi total: 1.962 mm, lebar total: 895 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 601 kg, tegangan masuk: 208 V, arus masuk: 18 A, DE Bwsdpfx Aoy U H Hmepcjp

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 140L-C, Tahun pembuatan: 2022, jam operasional: 5.854 h, panjang total: 1.450 mm, tinggi total: 1.040 mm, lebar total: 1.250 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 380 kg, tegangan masuk: 400 V, arus masuk: 12 A, frekuensi input: 50 Hz, suhu lingkungan (min.): 10 °C, suhu lingkungan (maks.): 40 °C, sekring listrik: 16 A, lebar meja: 500 mm, kapasitas tangki: 140 l, panjang meja: 700 mm, daya: 8,3 kW (11,28 hp), kecepatan perjalanan (maks.): 24.000 mm/menit, jumlah kepala cetak: 2, Refurbished industrial fused filament fabrication (FFF) 3D printer Bwjdexuh Nyepfx Apcjp Includes: - 140L-C printer - Vibration-dampened platform - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model..... HAGE 3D-140L-C Year of manufacture..... 2022 Operating hours..... 5,854 h Printing technology..... FFF (Fused Filament Fabrication) Filament diameter..... 1.75 mm; open material system Build area (L x W)..... 700 mm x 500 mm Build height..... up to 400 mm Build volume..... up to 140,000 cm³ Dimensions and Weight Length..... 1,450 mm Width..... 1,250 mm Height..... approx. 1,040 mm Weight..... approx. 380 kg Temperature Maximum printhead surface temperature..... 300°C (optionally 450°C) Maximum build plate surface temperature..... 180°C Maximum build chamber temperature..... 85°C Minimum operating temperature..... +10°C Maximum operating temperature (ambient)..... +40°C Electrical AC input..... 400 V / 50 Hz Power supply..... 24 V DC Connection..... USB 3.0 / Ethernet Printing Features X-axis speed..... up to 400 mm/s Y-axis speed..... up to 400 mm/s Z-axis speed..... up to 300 mm/min XY-plane accuracy..... < 0.1 mm Print control..... Industrial control (Sigmatek) Software..... HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Includes storage compartments Includes machine feet with vibration damping

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, panjang total: 100 mm, tinggi total: 100 mm, lebar total: 95 mm, berat keseluruhan: 570 kg, tegangan masuk: 230 V, arus masuk: 8 A, frekuensi input: 50 Hz, sekring listrik: 16 A, daya: 1,7 kW (2,31 hp), EOSM100-2016 Bjdpfxsy Szv Rj Apcjwp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 570150, Tahun pembuatan: 2015, jam operasional: 10.018 h, stratasys-connex-500-2015 Bjdey S Rp Hspfx Apcswp

Kondisi: baru, SLS-materialen voor industriële & compacte SLS 3D-printers Hoogwaardige SLS-poeders voor professioneel 3D-printen — compatibel met een breed scala aan industriële en compacte SLS 3D-printers zoals EOS, Formlabs, Sinterit, Sintratec, Nexa3D en Raise3D systemen. Onze SLS-poeders worden uitvoerig in eigen huis getest om een betrouwbare verwerking, uitstekende mechanische eigenschappen en constante printkwaliteit op diverse machineplatformen te waarborgen. Ontworpen voor zowel industriële productie als compacte SLS-systemen leveren IM3D-materialen professionele prestaties zonder beperkingen van gesloten ecosystemen. Beschikbare Materialen PA12 Balance — €45/kg Kostenefficiënt allround PA12-poeder met uitstekend verfrisgedrag en betrouwbare mechanische eigenschappen. PA12 Performance — €49/kg Verbeterd PA12-materiaal met verhoogde rek bij breuk en grotere slagvastheid voor veeleisende functionele toepassingen. PA12 Glasgevuld (PA12-GF) — €44/kg Stijf en maatvast PA12-materiaal, versterkt voor gereedschaps- en constructiedelen. TPU88A — €45/kg Flexibel SLS-materiaal met uitstekende elasticiteit, duurzaamheid en impactbestendigheid. Machinecompatibiliteit Compatibel met een breed scala aan SLS-systemen, waaronder: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Bodpfx Aey Til Ajpcjwp Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 Meer compatibiliteitsinformatie: im3d.shop/printer-compatibility OEM Materiaalalternatieven Wij bieden alternatieven en/of plug-and-play vervangingen voor materialen van Formlabs, Sinterit, Sintratec en Raise3D, waaronder: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM vergelijkingsoverzicht: im3d.shop/compare/oem Waarom kiezen voor IM3D SLS-materialen? - Brede compatibiliteit met industriële en compacte SLS-systemen - Uitstekende refresh rates en lage kosten per onderdeel - Stabiele verwerking en consistente printkwaliteit - Industriële prestatie zonder vendor lock-in - In-house getest en gevalideerd voor productie - Technische onboarding en support beschikbaar - Snelle levering vanuit Nederland

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: J5500144, Tahun pembuatan: 2020, jam operasional: 5.336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine has been professionally maintained during its operational period and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality, multi-material and full-color models. Specifications: Total printing hours: approx. 5,336 h Print heads recently replaced (approx. 250 h in use) Bodpfxjytg Rzs Apcswp Professionally maintained during period of operation The machine has been idle for approx. 1 year – technical inspection recommended prior to commissioning Original system value > €120,000 Ncedmjytg Rzj Dt Eb Ejt Stratasys ProAero Air Extractor (PolyJet air filtration system) included Stratasys scale/scanner included Standard cables and connectors included Available maintenance history Typical applications: Industrial design & product development Architectural and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine viewing possible by appointment. Pickup location: Belgium. Contact us for more information, photos, or to schedule a viewing appointment.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 560 h, Termasuk bahan habis pakai senilai 5.000€! Bahan habis pakai HP, semuanya tersegel dan dalam kemasan asli: 5x 500ml fusing/detailing agent ~5x270€= 1.350€ 12x color agent (semua warna) ~12x130€= 1.560€ Bwsdpfxoxm Uypj Apcjp 1x kit printhead warna ~950€ 1x kit printhead ~950€ 1x PA12 Powder Menjual printer HP MJF-580 kami yang jarang digunakan. Perangkat ini hanya dioperasikan dengan kontrak HP yang masih berlaku. Saat ini tidak ada kontrak aktif. Printer dapat mencetak bagian dalam semua warna. Pengambilan harus diatur sendiri oleh pembeli.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SLM250182820, Tahun pembuatan: 2018, panjang total: 110 mm, lebar total: 100 mm, daya laser: 250 W, panjang gelombang laser: 1.070 nm, jenis pendinginan: udara, 1 Bwsdpfey Sm D Hox Apcjp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, panjang total: 584 mm, tinggi total: 483 mm, lebar total: 914 mm, berat keseluruhan: 48 kg, We are offering our two 3D printers for sale; both are fully functional and in good condition. These two units are only available as a set. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Bwedpfx Apsy Rq Hijcop Printing process: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: kinematic coupling, up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer thickness: 100 µm (standard); up to 250 µm Materials: Onyx (nylon/carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (cloud-based) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing process: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: kinematic coupling, flatness up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fibers for reinforced components Laser-assisted calibration: automatic leveling Layer thickness: 100 µm (standard); minimum 50 µm; maximum 250 µm Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (cloud-based) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both devices are used but fully operational. Areas of application: Functional parts, prototypes, end-use parts, tools, jigs and fixtures for automotive, aerospace, medical technology, mechanical engineering, defense. Scope of delivery: Standard Eiger software, power supplies, base materials, toolkits. Optional add-ons available upon request. Location upon request! Collection or shipping possible by arrangement.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EX-006-S25, Tahun pembuatan: 2022, jam operasional: 20 h, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, arus masuk: 32 A, sambungan udara terkompresi: 10 batang, frekuensi input: 60 Hz, daya: 9 kW (12,24 hp), Kami menawarkan CEAD S25 LSAM Extruder baru, tahun pembuatan 2022. Model: S25 Extruder Nomor seri: EX-006-S25 Fase input: 3 fase Tegangan input: 400 V Frekuensi input: 50-60 Hz Arus input: 32 A Daya: 9 kW Rating arus hubung singkat: 10 kA Tekanan udara: 6-10 bar Tekanan udara: 87-145 psi Bwjdsy Nk S Njpfx Apcop Rekomendasi RCD: 30 mW Pengering dan feeder pellet sudah termasuk. Termasuk hampir 2 ton pellet Airtech Dahltram® C-250CF + senyawa pembersih. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.