Beli Mesin gulung plat bermotor, ketebalan plat 6,1-14 mm bekas (140)

Kondisi: baru, en-GB: Isitan Hydraulic 4-Roller Plate Bending Machine 4R HMS 2050x200 - 2 speeds - Driven top and bottom rollers - Hydraulic lateral roller adjustment - 3 digital readouts - Hydraulic drop-end bearing Dsdpfxjh Ar Duo Aiusch - Hardened rollers - Cone bending device - Separate control panel Useful working length: 2050 mm Top roller diameter: 200 mm Side roller diameter: 180 mm Total motor power: 5.5 kW Working speed: 3 m/min – 6 m/min Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending Performance Data 10 mm at minimum inside diameter of 1000 mm (5 x top roller) 8 mm at minimum inside diameter of 300 mm (1.5 x top roller) Pre-bending Performance Data 8 mm at minimum inside diameter of 1000 mm (5 x top roller) 6 mm at minimum inside diameter of 300 mm (1.5 x top roller) All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Kondisi: baru, 1 Dedpfjxrdxfox Aiuech

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SMR-S 1070 x 130 Technical Specifications: Dcjdpfxjiw D Dxs Aiuoh Special features included in price: - Hardened rollers - Motorized adjustment of the rear roller - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 7.0 mm - Pre-bending sheet thickness: 6.0 mm - Roller length: 1070 mm - Smallest bending diameter: 195 mm - Roller diameter: 130 mm - Weight: 1150 kg - Dimensions (L x W x H): 2550 x 630 x 1020 mm - Motor: 3.75 kW Equipment: - Top and bottom rollers driven electrically - Swing-out top roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Kondisi: baru, Ostas 4-Roller Round Bending Machine 4R OHS 2070 x 220 Hydraulic side roll adjustment Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 2000 mm Top roll diameter: 220 mm Dcedpfx Aiotvn D Tjush Side roll diameter: 180 mm Total motor power: 4+3 kW Weight: 4900 kg Dimensions (mm): 4050 x 1550 x 1470 (L x W x H) Performance data - Bending: 11 mm at minimum inner diameter (5 x top roll) 9 mm at minimum inner diameter (1.5 x top roll) Performance data - Pre-bending: 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm2 yield strength Material: (ST 37 - ST 42 structural steel) Installed special equipment: Infinitely variable roll speed NC control:

Kondisi: baru, Bending length: 1600 mm Sheet thickness: 8 mm Top roll diameter: 170 mm Technical specifications: - Rear roll motor-driven - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for optimal bending - Top and bottom rolls driven by brake motors and planetary gears - Portable control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor: EURO 1,650 - Digital readout for rear roll position: EURO 1,010 - Extended rolls: EURO 966 Djdpfx Aied Ab Nqsuoch - Profile rolls: EURO 1,190 We have numerous references!

Kondisi: baru, Sheet thickness: 13 mm Bending length: 4100 mm Top roller diameter: 360 mm Dodpfx Aisd Ab Rueusch Technical data: - Hardened and polished rollers - Complete frame made from ST-52 steel - Symmetrical 4-roller arrangement - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic and gearbox system - Vertical movement of the lower roller driven hydraulically - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 12,516 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roller - Adjustable lower roller support system (for special customer requirements) We have numerous references!

Kondisi: baru, Bending length: 3100 mm Sheet thickness: 13 mm Upper roll diameter: 300 mm Technical specifications: Doded Ab S Tepfx Aiuoch - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control console - Rolls mounted with bearings - Hydraulic upper roll cover, can be opened and closed via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Kondisi: baru, Bending length: 2600 mm Sheet thickness: 7 mm Top roll diameter: 200 mm Technical data: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - Compliant with CE standards Djdpfxsd Ab Ngj Aiuech Options: - Bottom roll driven by electric motor EURO 2,200 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have many references!

Kondisi: baru, Blech thickness: 8 Bending length: 4100 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Monolithic frame made of ST-52 steel - Four rolls arranged symmetrically - Hydraulically driven top opening for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls powered by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically actuated - Movable control panel - Compliant with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 Dodpfod Ab R Esx Aiusch - Side supports EURO 9,660 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Kondisi: baru, Sheet thickness: 8 mm Bending length: 2600 mm Top roll diameter: 210 mm Technical data: - Hardened and polished rolls - Complete frame made from ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movement of the lower roll is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotational speed EURO 4,681 - Feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 6,600 Dsdpfx Aed Ab Sfjiuoch - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Kondisi: baru, Sheet thickness: 8 mm Bending length: 2100 mm Top roll diameter: 190 mm Technical Data: - Hardened and polished rolls - Entire frame made from ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top for easy material removal - Digital display for lower and side roll positioning - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically powered - Mobile control panel - Complies with CE standards Dedpfx Aiod Ab Siouech Options: - Variable rotation speed EURO 4,109 - Material feed table (1000x2000 mm) EURO 2,600 - Oil cooler EURO 1,040 - Central support EURO 6,250 - Side supports EURO 3,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Kondisi: baru, en-GB_Bending length: 4100Sheet thickness: 8Top roller diameter: 300 Dcodod Ab S Sspfx Aiueh Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control desk - Rollers mounted on bearings - Top roller cover hydraulically opened and closed via control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movement hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,660 We have numerous references!

Kondisi: baru, translation-001 Djdsd Ab Tkopfx Aiuoch

Kondisi: baru, Bending length: 2100 mm; Sheet thickness: 10 mm; Upper roll diameter: 210 mm Technical Specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls Dsdpfx Aijd Ab Tmeusch - Portable control panel - Rolls mounted with bearings - Upper roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed: EURO 4,682 - Material feed table on request - Oil cooler: EURO 1,040 - Central support: EURO 8,250 - Side supports: EURO 4,600 We have numerous references!

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Dcodpfx Ajd Ab H Heiush Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Plate thickness: 13 mm Dcedpfxsd Ab R Ts Aiujh Bending length: 2550 mm Top roller diameter: 270 mm Plate length: 2550 mm Technical data: - Hardened and polished rollers - Complete body made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movements of the lower roller are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 6,690 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roller - Adjustable lower roller support system (for special customer requirements) We have numerous references!

Kondisi: baru, Sheet thickness: 8 mm Bending length: 1600 mm Top roll diameter: 190 mm Technical specifications: - Hardened and polished rolls - Complete frame made from ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox Dcodpfx Aed Ab Skeiuoh - Vertical movements of the lower roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681.00 - Material feed table EUR 3,400.00 - Oil cooler EUR 1,040.00 - Central support EUR 8,250.00 - Side supports EUR 4,580.00 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for specific customer requirements) We have numerous references!

Kondisi: baru, Bending length: 2600 mm Sheet thickness: 10 mm Top roller diameter: 230 mm Technical specifications: - Hardened and polished rollers - Complete body made from ST-52 steel - Conical bending device - Digital readout for side rollers - Portable control console Dcedpod Ab Thsfx Aiueh - Rollers mounted with bearings - Top roller cover, hydraulically openable and lockable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EURO 4,682.00 - Material feed table on request - Oil cooler EURO 1,040.00 - Central support EURO 8,250.00 - Side supports EURO 6,600.00 We have many references!

Kondisi: baru, Sheet thickness: 13 Bending length: 2100 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Full-body construction from ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positioning - Hydraulic adjustment - Top and bottom rolls driven hydraulically and by gearbox - Vertical movements of the lower roll are hydraulically powered - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 5,560 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requests) Dcedpfxjd Ab Sco Aiuoh We have numerous references!

Kondisi: baru, Bending length: 3100 mm Sheet thickness: 10 mm Top roller diameter: 270 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Top roller cover, hydraulically openable and lockable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request Dedpjd Ab Tcsfx Aiuech - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 7,070 We have numerous references!

Kondisi: baru, Sheet thickness: 30 Bending length: 2100 Top roll diameter: 360 Technical Data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the bottom roll is hydraulically driven Dcedpfed Ab Rxox Aiuoh - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,060 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Replaceable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Kondisi: baru, Sheet thickness: 13 mm Bending length: 3100 mm Top roller diameter: 300 mm Technical Data: - Hardened and polished rollers - Entire frame made from ST-52 steel - The 4 rollers are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers are driven by hydraulics and gearbox - Vertical movements of the lower roller are hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roller - Adjustable lower roller support system (for special customer requests) Dedpfx Asd Ab R Hoiuoch We have numerous references!

Kondisi: baru, Bending length: 3100 mm Sheet thickness: 20 mm Top roll diameter: 360 mm Technical specifications: Dcjdpfx Aied Ab S Aeujh - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted on bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Kondisi: baru, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 190 mm Technical specifications: - Hardened and polished rollers - Entire body made of ST-52 steel Dcjdpfx Aied Ab Tqjueh - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted with bearings - Top roller cover is hydraulically openable and closable via the control panel - All rollers are driven by hydraulic motor and planetary gearbox - Side movements are hydraulically driven Options: - Variable rotation speed: EURO 4,682 - Material feed table: on request - Oil cooler: EURO 1,040 - Center support: EURO 8,250 - Side supports: EURO 4,580 We have numerous references!

Kondisi: baru, Bending: 10.0 mmSheet length: 2550 mmSheet thickness: 13.0 mmTotal power requirement: 15.0 kWGross weight approx.: 10.6 tDimensions (LxWxH): 4.76x1.66x1.59 m Image similar Bending capacity: 13.0 mm • at 3x top roll diameter. Initial pre-bending: 10.0 mm • at 1.5x top roll diameter. Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive for top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Infinitely variable rolling speed Dsdpfx Ajd Ab H Ieiujch • Cone bending device • Hardened rolls • Hydraulic positioning of side rolls synchronized by PLC • Hydraulic positioning of bottom roll by torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment conform to CE regulations For catalog, see the following link: Important notes for cone bending: • The max. sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended