Beli Mesin pembengkok pelat motorik, ketebalan pelat 3–6 mm bekas (148)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, produsen pengendali: SIEMENS, model controller: PLC, jumlah rol: 4, diameter roller (bawah): 150 mm, diameter rol atas: 150 mm, diameter roll samping: 140 mm, diameter rol: 150 mm, panjang rol: 2.050 mm, lebar kerja: 2.000 mm, penyesuaian ketinggian rol: 18 mm, tinggi kerja: 800 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, ketebalan maksimum lembaran baja tahan karat: 4 mm, tebal plat aluminium (maks.): 6 mm, ketebalan lembaran kuningan (maks.): 6 mm, ketebalan pelat tembaga (maks.): 6 mm, berat keseluruhan: 2.800 kg, panjang total: 3.800 mm, lebar total: 1.200 mm, tinggi total: 1.100 mm, daya: 3 kW (4,08 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jumlah tampilan digital: 4, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol yang dikeraskan, 4 ROLLEN BLECHBIEGEMASCHINE NC HYDRAULISCHES MODELL 2000X6 MM / 4 MM VORBIEGEKAPAZITÄT PROGRAMMIERBARES AUTOMATISCHES WALZEN BIEGEN NC 4-ACHS-STEUERUNG Kapazität: Blechbreite: 2000 mm Godpfxsw Hpzwo Ag Rjkf Walzstärke: 6 mm Vorbiegung: 4 mm Mindestwalzdurchmesser D = 180 mm Abhängig von Blechdicke und -festigkeit Rollenlänge: 2050 mm Oberwalzendurchmesser: 150 mm Unterwalzendurchmesser: 150 mm Walzen: gehärtete Oberfläche, hohe Festigkeit, feine Oberflächenbearbeitung – geeignet zum Walzen von Edelstahlblechen Kegelbiegeeinrichtung inklusive Rollenantrieb elektrisch auf den Mittelwalzen zur Biegetraktion des Blechs Vorbiegungslast variabel je nach Blechdicke und Festigkeit Bedienkonsole elektrisch, mit Drucktastern und digitaler Anzeige aller 4 Walzen auf dem Bildschirm NC-programmierbare 4-Achs-Steuerung für automatisches Biegen, bis zu 200 Programme speicherbar Hydraulische Öffnung vorne zum Entnehmen der gewalzten Teile Geschwindigkeit: stufenlos regelbar von langsam bis schnell Sicherheitsausstattung mit Notausschalter Bedienungs- und Wartungsanleitung enthalten Abmessungen (mm): 3800 x 1200 x H1100 Gewicht: 2800 kg

Kondisi: baru, Type: Motorized Working length: 1,050 mm Roller diameter: 110 mm Godjug Un Espfx Ag Rokf Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2.2 kW Minimum bending diameter: 150 mm Top and bottom rollers driven by a single gear system. Rollers made from high tensile strength SAE 1050 certified steel. Conical bending system Induction-hardened rollers Wire grooves at the end of the rollers.

Kondisi: bekas, Mesin Tekuk Roll Listrik 3 Rol Panjang Maksimal: 1000 mm Ketebalan Maksimal: 3 mm Diameter Rol: Ø 80 mm Dimensi (P x L x T): 2000 x 1000 x 1000 mm Gkodpfx Ajw Ti Uvjg Ref Berat: sekitar 1 ton

Kondisi: baru, Tahun pembuatan: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Lower roll diameter: 110 mm Bending roll diameter: 110 mm Total power requirement: 1.1 kW Machine weight: approx. 0.9 t Space requirement: approx. 2.5 x 0.6 x 1.1 m New machine Gedsvx Uvxopfx Ag Rjkf Cone bending device, hardened and ground rolls, motorized bending roll stationary control panel, digital display for bending roll (right and left), digital display for lower roll

Kondisi: baru, Sheet width 1290 mm Sheet thickness 5 mm Gjdpfx Agevzhgpj Rjkf Pre-bending yes Roll diameter 120 mm Rolling speed 1 - 6 m/min Total power requirement 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, cambered rolls, adjustment of lower and bending roll via handwheel and worm gear, drive of upper and lower rolls via worm gear motor, stepless rolling speed control via inverter, top roll can be swung out. Swedish quality product. This new machine is also available in the following sizes: Working length from 1040 to 2540 mm, Max. sheet thickness (400 N/mm²) from 1 to 6.5 mm. Among other options, the following are available: conical bending device (see picture 2), digital display (see picture 4), motorized adjustment (see picture 5) with remote control (see picture 3), and hardened rolls. Accessories prices + VAT: + Hardened and ground rolls = EUR 2,650.00 + Digital display per axis = EUR 1,050.00 + Conical bending device with diagonal adjustment of the bending roll, sliding shoe and handwheel with display = EUR 1,500.00 + Motorized adjustment of feed roll = EUR 3,550.00 + Motorized adjustment of lower roll = EUR 3,550.00 Stocking dealer with 1,600 m² exhibition hall.

Kondisi: baik (bekas), Three-roll bending machine, three-roll plate bending machine, plate roller, plate rolling machine, 3-roll bending machine, profile bending machine, three-roll plate rolling machine, motorized plate roller -Round bending machine: manually operated 3-roll plate bending machine -Max. sheet width: 1270 mm -Max. sheet thickness: 2.5 mm -Roller diameter: 90 mm -Dimensions: 1960/610/H1050 mm Gjdpfx Ajwcrk Hog Rjkf -Weight: 524 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 0 h, nomor mesin/kendaraan: plate roll, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, produsen pengendali: MG EVO, model controller: EVO 4 AXIS, jumlah rol: 4, diameter roller (bawah): 140 mm, diameter rol atas: 160 mm, diameter roll samping: 150 mm, diameter rol: 200 mm, panjang rol: 2.050 mm, lebar kerja: 2.000 mm, tinggi kerja: 700 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, ketebalan maksimum lembaran baja tahan karat: 6 mm, tebal plat aluminium (maks.): 6 mm, berat keseluruhan: 2.200 kg, panjang total: 3.200 mm, lebar total: 1.100 mm, tinggi total: 1.200 mm, daya: 4 kW (5,44 hp), tegangan masuk: 400 V, jumlah tampilan digital: 4, masa garansi: 12 bulan, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol yang dikeraskan, de-4-ROLLEN-Maschine MG ITALIEN, HYDRAULISCH MODELL M2006P EVO_CNC Tafelschwenkbiegemaschine mit Planeten-Design, Doppel-Pinch-Vorbiegeeinrichtung CNC_EVO PROGRAMMIERBAR MIT AUTOMATISCHER BERECHNUNG – AUTOMATISCHES BLECHBIEGEN Kapazität: -Blechausladung: 2.000 mm -Blechdicke Biegen: 6 mm -Blechdicke Vorbiegen: 4 mm Walzen – Nutzbare Breite: 2.050 mm – Oberwalze: 160 mm – Unterwalzen: 140 mm Installierte Konfiguration: • Oberflächengehärtete Vierwalzen mit Feinschliff, besonders geeignet für das Biegen von Edelstahl. • Doppelte Vor-Pinch-Funktion, mit einstellbarer Presskraft nach Blecheingabe. • Hydraulische Konusbiegeeinrichtung mit gehärtetem Anschlagpolster. • Angetriebene Walzenrotation oben/unten über Hydraulik-Getriebe, jede Walze mit axialem Direktantrieb. • Kalibriersystem für das Nachwalzen (Rundbiegen) geschweißter Zylinder. • Elektrischer Bedienpult, unabhängig, mit zentralisierten Bedienelementen, Joysticks und CNC-Bildschirm. • CNC-Steuerung mit 15" Touchscreen, CAD/CAM-Schnittstelle, 4 Achsen, automatische Berechnungssoftware. Mit digitaler Achsenanzeige für manuellen, halbautomatischen und vollautomatischen Betrieb. • Hydraulisch öffnende Stirnseite (Drop-End) zum Entladen geschlossener Schalen. • Stufenlos regelbare Arbeitsgeschwindigkeit mit Achseninterpolation. Gsdpfjw Dnd Ssx Ag Rjkf • Sicherheitseinrichtung mit Not-Aus. • Betriebs- und Wartungsanleitungen enthalten.

Tahun pembuatan: 2024, Kondisi: baru, MRB-S Series Technical Data (see images) Standard Equipment - CE certification - Conical bending - Motorized rear roll - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Support stands and brake system for precise bending (for 2.5 and 3m machines) - Digital display - Motorized rear roll with feeding Optional Equipment - Motorized bottom roll mounting - Ground rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments MRB Series: Technical Data (see images) Standard Equipment - CE standard - Digital display - Conical bending - Motorized rear roll with feeding Gkjdpfx Agefin E Ds Rsf - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Brake system for precise bending Optional Equipment - Motorized bottom roll with feeding - Polished rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments Everything can be configured according to your requirements, with very short production and delivery times. Further information is available upon request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and, with its headquarters in Turkey, has established itself as one of the world’s largest manufacturers of sheet metal machinery. With over 60 years of experience in research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced production facilities covering a total of 150,000m², the Durmazlar Group and its DURMA machines are today among the internationally recognized producers in the sector, distributing products to 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an essential part of the Central Hessen region. Here, we are your direct contact on behalf of Durmazlar, ready to provide expert advice and support when it comes to sheet metal machinery. Our demonstration center gives you the opportunity to get a hands-on look at our machines, experience firsthand the quality and precision technology of our products, and receive the best possible consultation tailored to your business goals. Our mission is to be your local direct partner and to offer you comprehensive services including training and customer support. We are happy to support you directly from Germany—from consultation and purchase to the entire service life of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. Here we are your reliable partner for advanced technological solutions in sheet metal processing.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Three-Roller Electromechanical Plate Rolling Machine ESR 2020 x 3.5 mm with Asymmetric Rolls is designed for the production of cylindrical and conical shells with various diameters. This machine is intended for bending sheet metal up to 3.5 mm thick and 2020 mm long, with a top roll diameter of 125 mm. The three-roller bending machines in this series are particularly popular due to their relatively simple yet functional design. They are ideally suited for customers seeking medium-capacity equipment at a reasonable cost. Key advantages: Asymmetric roll arrangement Bottom and top rolls are driven by a gear and chain system powered by an electric motor The top roll rotates in both directions and is equipped with a tilting and rotating mechanism Manual height adjustment for bottom and side rolls Conical bending capability Foot pedal control with emergency stop button Technical data: Model: ESR 2020 x 3.5 mm Max. working width: 2020 mm Max. sheet thickness: 3.5 mm Roll diameter: 125 mm Motor power: 3 kW Dimensions (L/W/H): 2530 x 640 x 1050 mm Weight approx.: 1230 kg (±2%) Standard equipment: Foot control for operation Gedpfx Ajrh E Nrjg Rokf Operating manual in Polish CE conformity declaration NOTE: The rated values for standard equipment are based on cold-rolled metals with a yield strength of 260 N/mm². The quoted price is NET. Transport costs are not included. For further information, please contact us by phone or email. Please visit our website for the full offer.

Kondisi: bekas, Tahun pembuatan: 2020, 1 Gjdpfxow Nhzys Ag Rokf

Kondisi: bekas, Tahun pembuatan: 2022, Sheet width: 1550 mm Sheet thickness: 4 mm Pre-bending: 6 mm Total power requirement: 2.2 kVA Machine weight approx.: 1.42 t Space requirement approx.: 2.7 x 0.75 x 1 m Rolling feed: 3.5 m/min Motorized Plate Bending Machine Working width 1550 mm Material thickness up to 4 mm Roller diameter 140 mm Rolling speed 3.5 m/min Heavy-duty steel welded construction Gsdpfjt Hmlqox Ag Rskf Driven top and clamping rollers Swing-out top roller Manual adjustment of clamping and side rollers Roller drive via powerful electric motor and gearbox Wire grooves in the clamping roller Emergency stop safety device With mobile control panel and foot pedal Features: Swing-out top roller Control panel with digital display and manual controls (optional) RBM 2050-30 E PRO with optional motorized adjustment of side roller and digital display for side roller Maximum bending capacity, steel 400 N/mm²: 4.0 mm Maximum conical bending capacity, steel 400 N/mm²: 2.0 mm Maximum bending capacity, stainless steel: 3.0 mm Maximum conical bending capacity, stainless steel: 1.5 mm Maximum bending capacity, aluminum: 4.8 mm Maximum conical bending capacity, aluminum: 2.4 mm Minimum bending diameter: 210 mm Roller speed: 3.5 m/min

Kondisi: bekas, Three-roll plate rolling machine, three-roll - sheet metal bending machine, bending machine, sheet metal rolling machine, 3-roll plate bending machine, section bending machine, three-roll sheet rolling machine -Spare part: upper roll -Drawing available in the images -Maximum sheet width: 2060 mm Gksdpfxscx T E Re Ag Rjf -Maximum sheet thickness: mm -Roll diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, en-1 Gkjdpow An Uhofx Ag Rsf

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg Gkodpsftdh Iofx Ag Rjf The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request.

Kondisi: baru, Fastech 3-Roller Plate Bending Machine FRS 2050 x 140 Technical Specifications: Special equipment included in the price: - hardened rollers - motorized rear roller adjustment - motorized lower roller adjustment - 2 x digital readouts Sheet width: 2050 mm Sheet thickness max.: 4.5 mm Pre-bending thickness: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Smallest bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: Gedpehzq D Hsfx Ag Rjkf - Top and bottom rollers electrically driven - Swiveling top roller - Cone bending attachment - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operator panel - Safety cable - Values refer to St-37 / 240 N/mm² - CE marking

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Hydraulic 3-Roll Bending Machine with Variable Axes HRB 3V by Durma Technical specifications: Bending length: 3,100 mm Gsdsd E Ib Ispfx Ag Rokf Bending capacity Ødx1.5: 51 mm Bending capacity Ødx5: 60 mm Pre-bending capacity Ødx1.5: 39 mm Pre-bending capacity Ødx5: 35 mm Top roll diameter: 520 mm Bottom roll diameter: Side roll diameter: 470 mm Max. roll opening: Length: 6,600 mm Width: 2,250 mm Height: 2,670 mm Working height: 1,920 mm Weight: 40,500 kg Motor power: 45 kW + 18.5 kW Minimum additional top roll diameter: Oil tank capacity: 1,000 liters Additional machines are available for demonstration at our facility in Staufenberg. Further information available upon request.

Kondisi: baru, Ostas 3-Roller Plate Bending Machine ORM 1570 x 140 Special features included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital readout Sheet width: 1570 mm Sheet thickness (max): 5.0 mm Sheet thickness (pre-bending): 4.0 mm Roller length: 1570 mm Roller diameter: 140 mm Weight: 1450 kg Dimensions (L x W x H): 2725 x 800 x 1100 mm Gjdpfeiu Hqgex Ag Rjkf Motor: 2.2 kW Equipment: - Top and bottom rollers electrically driven - Swing-out top roller - Conical bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope - CE marking Specifications apply for St-37 / 240 N/mm²

Tahun pembuatan: 2021, Kondisi: baru, 3-roll plate bending machine Ostas ORM 1270 x 140 Technical Specifications: Special equipment included in the price: - Motorized adjustment of the lower rolls - Hardened rolls - Motorized adjustment of the rear roll - Digital display Sheet width: 1270 mm Sheet thickness max.: 5.0 mm Godefpmz Hepfx Ag Rekf Pre-bending sheet thickness: 4.0 mm Roll length: 1270 mm Roll diameter: 140 mm Weight: 1400 kg Dimensions (L-W-H): 2500 x 800 x 1100 mm Motor power: 2.2 kW Equipment: - Top and bottom roll electrically driven - Swing-out top roll - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operation panel - Safety cable - CE marking

Kondisi: baru, Rollmak 3-Roller Plate Bending Machine SME 110-10/5.5 Special features included in the price: - Hardened rollers - Motorized adjustment of the rear rollers - Digital display Sheet width: 1050 mm Max. sheet thickness: 5.5 mm Pre-bending sheet thickness: 5.0 mm Roller length: 1050 mm Roller diameter: 110 mm Smallest bending diameter: 165 mm Weight: 920 kg Dimensions (L x W x H): 2150 x 850 x 1150 mm Motor: 2.2 kW Equipment: - Electrically driven top and bottom rollers - Top roller can be swung out - Cone bending device Gkodpfx Aelu Epaog Rsf - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable - Values apply for St-37 / 240 N/mm² - CE marking

Kondisi: baru, Rollmak 3-Roller Plate Bending Machine SM 90-10/3.3 Special equipment included in price: • Hardened rollers • Motorized rear roller adjustment • Digital readout Godslu Emxjpfx Ag Rokf Sheet width: 1050 mm Maximum sheet thickness: 3.3 mm Pre-bending thickness: 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 465 kg Dimensions (LxWxH): 1650 x 700 x 1160 mm Motor power: 1.1 kW Features: • Electrically driven top and bottom rollers • Swing-out top roller • Cone bending device • Asymmetrical roller arrangement • Self-braking main motor • Separate control and operation panel • Safety cable All specifications comply with St-37 / 240 N/mm² CE marking

Kondisi: baru, Ostas 3-roll plate bending machine SMR-S 1570 x 130 Special equipment included in price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - 2 x digital display Gkedpfjiu Hvtox Ag Rsf Sheet width: 1570 mm Sheet thickness (max.): 6.0 mm Sheet thickness for pre-bending: 5.0 mm Roll length: 1570 mm Smallest bending diameter: 195 mm Roll diameter: 130 mm Weight: 1,520 kg Dimensions (L x W x H): 3050 x 630 x 1020 mm Motor: 2.2 kW Equipment: - Top and bottom rolls electrically driven - Top roll swing-out - Conical bending device - Asymmetric roll arrangement - Self-braking main motor - Separate control and operator console - Safety cable, CE mark Values apply for St-37 / 240 N/mm²

Kondisi: baru, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized adjustment of the rear roller - Digital display Sheet width: 1250 mm Sheet thickness (max.): 3.0 mm Pre-bending thickness: 2.5 mm Roller length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (L x W x H): 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: - Electrically driven upper and lower rollers - Swiveling upper roller - Cone bending device - Asymmetrical roller arrangement Gkodshzq Dqopfx Ag Rof - Self-braking main motor - Separate control and operation panel - Safety cable Values apply to St-37 / 240 N/mm² CE marking

Kondisi: baru, Rollmak 3-Roller Round Bending Machine SM 90-10/3.3 Technical Specifications: - Sheet width: 1050 mm - Maximum sheet thickness: 3.3 mm - Pre-bending sheet thickness: 3.0 mm - Roller length: 1050 mm - Roller diameter: 90 mm - Minimum bending diameter: 130 mm - Weight: 440 kg - Dimensions (LxWxH): 1650 x 700 x 1160 mm - Motor: 1.1 kW Features: - Upper and lower rollers electrically driven - Upper roller swing-out - Rear roller adjustment via handwheel - Conical bending device - Asymmetrical roller arrangement - Self-braking main motor Gkodstzll Espfx Ag Rof - Separate control panel - Safety rope - Values apply for St-37 / 240 N/mm² - CE marking

Kondisi: baru, Rollmak 3-Roller Plate Bending Machine SME 130-15/4.5 Special features included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1550 mm Gsdpfslu Ernex Ag Rokf Sheet thickness (max): 4.5 mm Sheet thickness – pre-bending: 4.0 mm Roller length: 1550 mm Roller diameter: 130 mm Smallest bending diameter: 195 mm Weight: 1,210 kg Dimensions (LxWxH): 2650 x 900 x 1200 mm Motor power: 2.2 kW Equipment: - Electrically driven top and bottom rolls - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating console - Safety cable Specifications apply for material St-37 / 240 N/mm² CE mark

Kondisi: baru, Cesurbend 3-Roll Plate Bending Machine MRS 1250 x 140 Technical Specifications: Special equipment included in the price: Gkjdpfoh Timpjx Ag Ref - Hardened rolls - Motorized rear roll adjustment - Digital readout Sheet width: 1250 mm Sheet thickness: max. 5.5 mm Pre-bending thickness: 5.0 mm Roll length: 1250 mm Roll diameter: 140 mm Weight: 1150 kg Dimensions (L x W x H): 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: - Top and bottom rolls electrically driven - Top roll swing-out - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety wire - CE marking