Beli Reaktor, ketel & tangki bekas (151)

Kondisi: bekas, kapasitas tangki: 1.345 l, GENERAL Construction type: suspended Remarks: 2 feet (claw supports) made of V2A stainless steel (support surface reversed; see photos); 1 vessel equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,900 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted cover Agitator: propeller Support type: claw supports Location: Bremen Technical documentation: drawing Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,370 mm Last application: pharmaceutical chemicals VESSEL Max. vessel operating temperature / °C: 200 °C Codjxqa S Eepfx Aareaa HEATING/COOLING JACKET Bottom head tempering: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight adhesions MATERIAL COMPOSITION Material of tempering system: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric, mounted in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm

Kondisi: bekas, kapasitas tangki: 3.532 l, GENERAL Design: suspended Remarks: 3 feet made of Fe; half-pipe coil around lower cylinder area; 1 heating connection possibly slightly bent Speed: 313 rpm Outer diameter: 1,800 mm Inner diameter: 1,590 mm Total height: 3,300 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. allowable operating temperature: 100°C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: mechanical seal without thermosiphon vessel Agitator: propeller Support type: feet Cjdpfoxqa Srox Aaroaa Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,532 liters Jacket volume: 103.0 liters Jacket material: V2A 1.4301 (AISI304) Product contact material: V4A 1.4429 (AISI316) Condition: used Last application: pharmaceutical chemicals TANK Max. tank operating temperature / °C: 100°C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminum EQUIPMENT Manway / dome: on top head (DN 500) Outlet: available Note: dents on the insulation jacket, manway cover plated AGITATOR Agitator arrangement: eccentric in top head Agitator documentation: Extensive agitator documentation available

Kondisi: bekas, kapasitas tangki: 1.969 l, GENERAL Design: suspended Remarks: 2 feet made of V2A (support surfaces reversed; see photos) Speed: 571 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Total height: 3,800 mm Heating/cooling: present Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft seal: mechanical seal without thermosiphon vessel Agitator: propeller type Mounting: feet Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double-jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Last application: Pharmaceutical chemistry VESSEL Max. vessel operating temperature / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight residues MATERIAL PROPERTIES Cedexqa Slopfx Aareaa Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric, top-mounted Agitator equipment: Technical documentation available for the agitator TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm

Kondisi: bekas, kapasitas tangki: 1.300 l, GENERAL Design: suspended Notes: One tank is missing the agitator; one tank with insulation; 2 lugs made of stainless steel V2A (support surface inverted); some flanges made of Fe (see photos) Speed: 571 rpm Internal diameter: 990 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations must be checked under local conditions) Heating/Cooling: available Power: 1.1 kW Max. perm. operating temperature: 200°C Max. perm. operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller type Support type: mounting lugs Location: Bremen Technical documentation: Drawing Jacketed cylinder: half-pipe coil Nameplate: Vacuum: 1.0 bar Cjdpfx Asxqa Sfoarjaa Volume: 1,300 liters Double-jacket volume: 23.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,330 mm Previous use: pharmaceutical chemistry TANK Max. operating temperature tank /°C: 200°C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Discharge: DN80 flange Note: minor residues/adhesions MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 volts Agitator arrangement: eccentric in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top cover wall thickness: 4.1 mm

Kondisi: bekas, kapasitas tangki: 2.765 l, GENERAL Design: suspended Remarks: Exterior of the tank sandblasted and primed; double jacket bolted to the lower head (see photos); 4 mounting lugs made of steel; exterior surface shows localized corrosion (may require repair) Speed: 167 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/Cooling: available Power: 2.6 kW Max. permissible operating temperature: 150°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 6.0 bar Agitator: Propeller Mounting type: Lugs Location: Bremen Technical documentation: drawing, TÜV certificates Nameplate: Vacuum: 1.0 bar Volume: 2,765 liters Double jacket volume: 42.0 liters Wall thickness - shell: 7 mm Double jacket material: V2A 1.4541 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,390 mm Caedpfxoxqa R Us Aarsa Last application: chemical industry TANK Max. operating temperature tank / °C: 200°C HEATING/COOLING JACKET Lower head temperature control: double jacket EQUIPMENT Outlet: Flange DN80 Note: slight residues AGITATOR Agitator manufacturer: Ekato Voltage: 500 V Current interrupter: Agitator positioning: centrally mounted on top head TECHNICAL DATA / DIMENSIONS Lower head wall thickness: 7 mm Top head wall thickness: 9 mm

Kondisi: bekas, kapasitas tangki: 2.750 l, GENERAL Design: Suspended Remarks: Support ring Fe; manway jib bent Speed: 323 rpm Internal diameter: 1,390 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,150 mm Heating/Cooling: available Power: 2.6 kW Max. allowable operating temperature: 200 °C Max. allowable operating pressure: 16.0 bar Cajdpfxjxqa R Is Aarea Max. overpressure: 3.2 bar Agitator: Propeller Base design: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 2,750 liters Jacket volume: 62.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous application: Pharmaceutical chemistry VESSEL Max. vessel operating temperature / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in the top head (DN 500) Outlet: flange DN100 Note: manway cover plated MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in the top head

Kondisi: bekas, kapasitas tangki: 2.500 l, ENGLISH GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; minor dents in the insulation jacket; manhole cover partially plated; manhole diameter 490 mm Speed: 307 rpm Outer diameter: 1,880 mm Inner diameter: 1,590 mm Explosion-proof: Motor is explosion-proof (compliance with local ATEX regulations must be verified under site conditions) Total height: 3,250 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator type: propeller Support design: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Double jacket volume: 180.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Cedexqa Rzopfx Aaroaa Previous application: chemical industry VESSEL Max. vessel operating temperature / °C: 200 °C HEATING/COOLING JACKET Max. allowable vacuum (double jacket / tube space) / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in top head Outlet (alternative entry): 130 mm Remark: minor residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 volts Interference suppressor: Agitator arrangement: centered in top head

Kondisi: bekas, kapasitas tangki: 7.385 l, en-ALLGEMEIN Equipment: crane lugs Design: suspended Remarks: manway DN 350/450; further technical documentation available Diameter, outside: 2,100 mm Diameter, inside: 2,000 mm Explosion-proof: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Overall height: 4,950 mm Heating/cooling: available Power: 3.07 - 11.2 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Cedpsxqa Rhofx Aareaa Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 7,385 liters Double jacket volume: 735.0 liters Double jacket material: steel Product-contact material: enamel Condition: used Last application: pharmaceutical chemicals TANK Max. operating temperature tank / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / shell side / bar: 1.0 bar Bottom temperature control: double jacket EQUIPMENT Manway / dome: in top head Discharge: available Discharge (alternative entry): 150 mm MATERIAL SPECIFICATION Head material: steel Shell material: steel AGITATOR Voltage: 380 Volts Agitator arrangement: centrally in top head Agitator features: agitator shaft and agitator blades made of stainless steel

Kondisi: bekas, kapasitas tangki: 8.250 l, GENERAL Features: Crane lugs Design: Suspended Remarks: Supporting ring made of Fe; sheet metal cuts in the insulation jacket; original manhole cover is no longer present (a similar manhole cover is included loose, see photos); on one connection the enamel coating is slightly chipped in places (see photos) Csdoxqa Rbspfx Aarsaa Outer diameter: 2,310 mm Inner diameter: 2,000 mm EX-protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Total height: 5,250 mm Heating/Cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: Anchor agitator Support type: Ring Location: Bremen Technical documentation: Drawings, various documents Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Double jacket material: Steel Product-contact material: Enamel Condition: used Cylindrical height: 2,100 mm Previous application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating underpressure double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket material: Aluminium EQUIPMENT Manhole / Dome: in upper head (DN 500) Outlet (alternative entry): 150 mm MATERIAL SPECIFICATION End caps material: Steel Cylinder material: Steel AGITATOR Voltage: 400 V Agitator arrangement: Centrally in the upper head

Kondisi: bekas, kapasitas tangki: 1.345 l, GENERAL Design: suspended Remarks: 2 support lugs made of V2A (contact surface reversed; see photos); some flanges made of Fe; heating connections cut off; minor sheet metal cutouts in insulation jacket Speed: 313 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 2,950 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Agitator: propeller Support type: lugs Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product-contact surface material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,360 mm Previous application: pharmaceutical chemistry Csdexqa N Ropfx Aarsaa VESSEL Max. operating temperature vessel / °C: 200 °C HEATING / COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: Aluminium EQUIPMENT Outlet: flange DN80 Note: slight adhesions, pressure marks on insulation jacket MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in top head

Kondisi: bekas, kapasitas tangki: 10.875 l, ENGLISH GENERAL Equipment: crane lugs Design: suspended Notes: Support ring made of Fe (iron); in some areas the flanges of the top head were welded from the inside by the previous operator with a stainless steel plate (and openings were partially cut into these plates; see photos); manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: present Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: mechanical seal with thermosiphon vessel Agitator: anchor agitator Base style: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 2,200 mm Previous application: adhesive industry VESSEL Max. vessel operating temperature / °C: 200 °C HEATING / COOLING JACKET Max. permissible negative pressure double jacket / pipe area / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in the top head Outlet: available Outlet (alternative input): 100 mm Note: slight residues, manhole cover missing MATERIAL SPECIFICATIONS Flange material: steel AGITATOR Caodsxqa Nwspfx Aarsa Agitator manufacturer: Ekato Voltage: 230/400 V Agitator arrangement: central on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top head wall thickness: 14 mm

Kondisi: bekas, Tahun pembuatan: 2001, kapasitas tangki: 280 l, GENERAL Equipment: Control cabinet (without guarantee) Design: upright Year of manufacture: 2001 Notes: Max. permissible temperature as per inspection certificate: -10/+120°C; vessel drawing in JPEG format as well as installation drawing available Speed: 339 rpm Outer diameter: 900 mm Inner diameter: 740 mm Total height: 2,100 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 130°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.5 bar Top cover: removable / hinged top cover Agitator: magnetic stirrer Stand design: mobile on wheels Location: Bremen Technical documentation: inspection certificate Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 280 liters Double jacket volume: 28.0 liters Caedpfexqa Nkjx Aaroa Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 630 mm Last application: pharmaceutical industry VESSEL Max. operating temperature vessel / °C: 130°C Number of legs: 4 units HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / tube space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulating jacket material: stainless steel EQUIPMENT Outlet: available MATERIAL CHARACTERISTICS Exterior surface: ground Interior surface: ground Leg material: stainless steel AGITATOR Voltage: 230/400 V Agitator mounting: bottom-mounted

Kondisi: bekas, kapasitas tangki: 1.500 l, en-GB: GENERAL Equipment: Venting/inlet valve, butterfly valve Design: vertical Remarks: Height-adjustable cap screws for the legs are missing; hand lever for the butterfly valve is missing; manhole cover not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurised by the previous owner and the cover was replaced accordingly) External diameter: 1,300 mm Internal diameter: 1,150 mm Total height: 2,700 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 20 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support design: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Capacity: 1,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Previous use: dairy TANK Max. operating temperature of tank / °C: 120 °C Bottom: flat bottom with slope No. of legs: 3 units HEATINGS/COOLING JACKET Bottom temperature control: thermoplate Casdpfx Aexqa Itjarja INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole / dome: in top head (Ø 430) Outlet: DN65 DIN 11851 Note: dents in the insulation jacket, the functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel AGITATOR Agitator arrangement: eccentric in top head

Kondisi: bekas, Tahun pembuatan: 2015, kapasitas tangki: 400 l, en-GB Cedpfx Aoxqa Hvoarjaa

Kondisi: bekas, Tahun pembuatan: 2016, kapasitas tangki: 6.000 l, ENGLISH GENERAL Equipment: Crane lugs Design: upright Year of manufacture: 2016 Remarks: Manhole DN 600; outlet with bolted valve; No information on the inspection of the double jacket in the inspection report (in a copy of drawing 1160246-1A or 1B there is a signed stamp "Inspected according to AD 2000 regulations by TÜV Süd"); Parts of the blind flanges may be present Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Ex-proof: Motor is ex-proof (compliance with applicable ATEX directives in local conditions must be checked) Total height: 2,630 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic agitator Mounting type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, static calculation, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,400 mm Last application: Pharmaceuticals TANK Max. operating temperature tank / °C: 135 °C Number of feet: 4 pcs. HEATING/COOLING JACKET Bottom temperature control: Thermoplate Cjdpfx Aasxqawnsrsaa INSULATION Insulation jacket: hermetically welded Insulation material: Armaflex Insulation jacket material: Stainless steel Insulation thickness / mm: 50 mm EQUIPMENT Manhole / dome: in cylinder Outlet (alternative input): 187 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Agitator manufacturer: Metenova AB Voltage: 400 volt Agitator arrangement: underneath TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 5.8 mm

Kondisi: bekas, Tahun pembuatan: 2019, kapasitas tangki: 1.000 l, EN GENERAL Design: vertical Year of manufacture: 2019 Speed: 711 rpm Outer diameter: 1,120 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,100 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Caodpsxqawbjfx Aarja Base type: mobile on castors Location: Bremen Technical documentation: drawing, various documents, inspection certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: thermoplate Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Jacket volume: 5.0 litres Cylinder wall thickness: 5 mm Wetted material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Previous application: Pharmaceutical TANK Max. operating temperature tank / °C: 135 °C Number of legs: 4 pcs HEATING/COOLING JACKET Base temperature control: thermoplate INSULATION Jacket: hermetically welded Insulation material: mineral wool Jacket material: stainless steel EQUIPMENT Manhole/dome: on top head (DN 600) Outlet (alternative entry): 31 mm MATERIAL SPECIFICATIONS Temperature control system material: AISI 316 (V4A) 1.4404 Leg material: stainless steel AGITATOR Agitator manufacturer: Metenova AB Voltage: 400 Volt Agitator arrangement: bottom-mounted TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top wall thickness: 5 mm

Kondisi: bekas, kapasitas tangki: 2.420 l, GENERAL Equipment: Lifting lugs Design: Suspended Notes: Manhole DN 350/450 (sight glass on manhole cover missing); support ring made of Fe; some flanges made of Fe Speed: 235 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,550 mm Heating/Cooling: present Power: 4 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top: Removable/openable top Agitator: Inclined blade agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 litres Double jacket volume: 100.0 litres Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipework / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / dome: in the top head Outlet (alternative specification): 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: Agitator arrangement: centrally in the top head Agitator equipment: Agitator drive was previously regulated by an external frequency converter at the former operator (no longer present), presumably in the range of 30 - 150 rpm Cjdjxqav Rspfx Aarsaa TECHNICAL DATA / DIMENSIONS Top head wall thickness: 7 mm

Kondisi: bekas, kapasitas tangki: 1.358 l, GENERAL Design: Vertical Remarks: 3-legged base frame made of stainless steel with components of carbon steel; minor dents in the insulation jacket; clamping knob for the manhole cover is missing External diameter: 1,420 mm Internal diameter: 1,280 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 143°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 0.5 bar Agitator: agitator flange Mounting type: frame Location: Bremen Cedpfx Aajxqavwerjaa Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 1,358 liters Double jacket volume: 40.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: food industry TANK Max. operating temperature tank / °C: 100°C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Agitator arrangement: eccentric in the top head

Kondisi: bekas, kapasitas tangki: 259 l, general-specifications Equipment: Ball valve Design: vertical Remarks: Handhole diameter 200 mm; minor dents on the insulation jacket Speed: 71 - 640 rpm External diameter: 830 mm Internal diameter: 690 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: present Insulation: present Power: 0.34 kW Max. permitted operating temperature: 142 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top head: Top can be removed/opened Agitator: Propeller Mounting type: mobile on castors Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 259 liters Double jacket volume: 18.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 470 mm Last application: pharmaceutical TANK Max. operating temperature tank / °C: 142 °C Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / Dome: Handhole Outlet: present Caodpfx Aoxqavksarsa MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator arrangement: Off-center in top head Agitator equipment: Transmission adjustable via handwheel

Kondisi: bekas, kapasitas tangki: 8.651 l, EN_GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (approx. 3500 mm without gearbox); Csdjxqavdjpfx Aaroaa Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/cooling: available Power: 5 / 15 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: Beam agitator Base type: Ring Location: Bremen Technical documentation: Drawing Cylinder jacket tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Double jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: V2A 1.4541 (AISI321) Condition: Used Last area of application: Chemical VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating underpressure double jacket / tube space / bar: 1.0 bar Bottom plate tempering: Half-pipe coil EQUIPMENT Manway / dome: in upper head Outlet (alternative info): 105 mm Note: Motor missing, manway cover plated MATERIAL SPECIFICATION Material (tempering system): V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator arrangement: Centered in upper head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Upper head wall thickness: 14 mm

Kondisi: bekas, kapasitas tangki: 8.609 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Remarks: Support ring made of steel; manhole diameter approx. 480 mm; vessel interior with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 RPM Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220 °C Max. allowable working pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: removable / hinged top head Agitator: beam agitator Base type: ring base Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Double jacket volume: 313.0 liters Shell wall thickness: 8 mm Product-contacting material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 2,190 mm Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING / COOLING JACKET Casdpoxqau Tjfx Aarja Max. allowable negative pressure in double jacket / tube area / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in top head Outlet (alternative specification): 100 mm Note: Motor missing, manhole cover missing MATERIAL SPECIFICATIONS Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: frame blade agitator; Agitator motor missing, but available from manufacturer; various agitator mounts available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top wall thickness: 14 mm

Kondisi: bekas, kapasitas tangki: 11.424 l, EN_GENERAL Equipment: spray head, crane lugs Design: vertical Notes: Double jacket with trickle ring – suitable only for non-pressurized temperature control; dents in the double jacket; double jacket cladding partially detached in the area of the upper head (see photos) Speed: 55 / 112 rpm Outer diameter: 2,140 mm Inner diameter: 2,000 mm Total height: 4,500 mm Heating/Cooling: available Power: 1.5 / 2.2 kW Max. overpressure: 3.2 bar Casdpfx Aajxqau Hsrsa Agitator: propeller Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 11,424 liters Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 3,000 mm Previous application: dairy TANK Max. operating temperature / °C: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: on top head (Ø 450) Outlet (alternative entry): 48 mm Remark: slight residues, outlet end cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI 304) Feet material: stainless steel AGITATOR Voltage: 380 Volt Agitator mounting: side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm

Kondisi: bekas, kapasitas tangki: 1.100 l, ENGLISH GENERAL Equipment: Lifting lugs Design: Vertical Notes: 3 loose load cells (functional condition not guaranteed) included in scope of delivery Speed: 394 rpm Outer diameter: 1,154 mm Inner diameter: 988 mm Total height: 2,600 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.99 bar Agitator: Magnetic stirrer Support structure: Feet Location: Bremen Technical documents: Drawing, various documents, inspection certificate Cylinder temperature control: Double jacket Cedpfxsxqauys Aarsaa Nameplate: Vacuum: 1.0 bar Volume: 1,100 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 875 mm Previous application: Pharmaceutical VESSEL Max. operating temperature vessel / °C: 130 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel FEATURES Manhole / Dome: Top head (DN 500) Outlet (alternative entry): 38 mm Note: Metallic discoloration inside MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Agitator manufacturer: HANAG Steriltechnik AG Voltage: 220/380 Volt Agitator arrangement: Bottom entry TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Top wall thickness: 4.5 mm

Kondisi: bekas, Tahun pembuatan: 2007, kapasitas tangki: 29.000 l, GENERAL Design: vertical Codpsxqat Nefx Aarjaa Year of manufacture: 2007 Remarks: Manhole diameter top head: approx. 700 mm; Manhole diameter cylinder: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Internal diameter: 2,980 mm Total height: 6,800 mm Heating/Cooling: available Power: 75 kW Max. overpressure: 0.6 bar Agitator: beam agitator Support type: on feet Location: external storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 3,368 mm Previous application: adhesive production TANK Max. operating temperature tank / °C: 100 °C Specific weight of medium (to/m³): 1.3 (to/m³) Number of feet: 4 pcs HEATING / COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: in cylinder, in top head Outlet (alternative input): DN 125 mm AGITATOR Agitator manufacturer: PRG Voltage: 400 volts Bottom bearing: Agitator arrangement: central in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top head wall thickness: 7 mm

Kondisi: bekas, kapasitas tangki: 435 l, en-001 Caodpoxqatpjfx Aaroa