Pengangkat tabung vakum

AERO-LIFT MULTI-LIFT 50

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Guodpoqakbrsfx Aaboa Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details. Gujdpfxjkvnume Aabsa

Tahun pembuatan: 2025, Kondisi: baru, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200) beladen, entfällt das manuelle Vorbereiten jeder einzelnen Palette – das spart Zeit und reduziert die körperliche Belastung der Mitarbeitenden. Stattdessen gibt das Gerät Paletten auf Knopfdruck oder nach voreingestelltem Algorithmus auf ein motorisiertes Rollenband ab, das sie zur weiteren Verarbeitung weitertransportiert. Der PD-10 kann mit verschiedensten Palettierlösungen kombiniert werden. Fassungsvermögen: bis zu 10 Europaletten Gedpehbg Uxsfx Aaboua Beladung per Gabelstapler Reduziert körperliche Belastung Steigert Effizienz

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg Gedpfx Aeqt Dmyoabsua - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Used Horizontal Panel Saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (2-track element): 9 units Clamping grippers: 7 units, first 3 are 2-finger grippers Air cushion table, width 650 mm: 4 units, each 2160 mm long Central blower: 1 unit with increased blower capacity – 3 angled-lift clamping grippers (2-finger design) – 1 angled-lift clamping gripper (1-finger design) – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1 – 150 m/min Gjdpfx Aaoymx S Dsboua Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width 0 mm; max. pressing width equals full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18kW: 28 kW Power Control CADmatic 4.0 control system with 17" flat display Labeling system with part graphics / labeling software / label printer PICA 104

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Gjdpfjfxgp Ujx Aabeua Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 720 mm, Perlengkapan: dokumentasi / manual, Insulating glass production line without sealing robot Max. glass size: 2500 x 1600 mm Min. glass size: 250 x 180 mm Gas filling press: models and triple glazing possible Gusdpfx Ajwikn Rsabja

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Gsdpfsmzbr Sex Aabsua X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: bekas, • Load capacity: 350 kg • 6 adjustable suction cups, 250 mm diameter • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley Gsdpfx Aasxnvq Esboua • 4 units available, brand new and unused • Available for immediate delivery IV: + Design standards 1. The design of the unit strictly complies with the European CE standard EN13155:2016, the American ASME B30.20-2006 standard, and the German UVV18 standard, with key structural performance data exceeding those of the above standards. 2. Safety factor: The main structure is rated at 4.0, the safe vacuum level is 65%, and the standard is 85%, which is 20% above the safety norm. V+ Equipment Testing and Standards 1. General a) Checks for completeness of materials, painted or scratched surfaces, suction cup damage, or pipe damage. 2. Points checked before leaving the factory: © Equipment suction test © Pressure hold test © Alarm test © Various control components • Price on request

Kondisi: bekas, Tahun pembuatan: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. Equipped with a vacuum-table clamping system that secures panels and sheets using vacuum pressure, this solution is especially efficient when processing thin components that are difficult to clamp with conventional systems. The machining center features a set of valves allowing different table zones to be activated or deactivated, thereby focusing vacuum in a specific area and optimizing the clamping of small parts. Capable of interpolated milling and drilling operations on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Tekna provides user-friendly software, suitable both for experienced CNC programmers and users with less experience. The TKE 783 is a 3-axis machining center designed for interpolated drilling and milling on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Gjdpfxsv D A Imo Aaboua Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Worktable dimensions: 2010 x 6300 mm Weight: 4842 kg Feed rates: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other details: Previously used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to assist you.