Beli Mesin Wire EDM dengan pergerakan longitudinal 0-299 mm bekas (12)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, berat keseluruhan: 2.722 kg, produsen pengendali: MITSUBISHI, model controller: M800, jumlah sumbu: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities including an X-axis travel of 15.7", Y-axis travel of 11.8", and Z-axis travel of 8.7". It is equipped with a Mitsubishi M800 control unit, automatic wire threading, and a chiller for improved performance. If you are seeking high-quality wire EDM machines, you should consider the Mitsubishi MV1200R we have for sale. Please contact us for further information about this machine. Additional Equipment • Automatic wire threading • Cooling unit • Remote control 360 installed • Includes round diamond guides • 1GB partition • Wire cutter • Angle Master advanced taper cutting • Angle Master software for precision tapering • CFAST compact flash card • Chiller chopper • DNC hardware Ethernet FTP • FS power supply • High-precision alignment jig • Includes wire alignment jig Machine Advantages Technical advantages of the machine: • X-axis travel: 15.7" Cpsdpox D Ryyjfx Aa Tew • Y-axis travel: 11.8" • Z-axis travel: 8.7" • U/V-axis travel: 2.4" x 2.4" • Maximum taper angle: 15° at 8" • Glass scale feedback: X, Y, U, V • Workpiece • Accuracy: .000002" • Table • Internal tank dimensions: 31.9" x 27.6"

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 3.600 h, tinggi total: 2.070 mm, berat keseluruhan: 3.400 kg, jumlah sumbu: 3, This 3-axis wire EDM machine SEIBU M50AG was manufactured in 2015. It supports workpiece dimensions up to 800x650x300 mm and a maximum weight of 800 kg. Features include a rapid traverse rate of 1200 mm/min and a fine step resolution of 0.0001 mm for precise machining operations. If you are looking for high-quality EDM machines, you should consider the SEIBU M50AG that we are offering for sale. Contact us for more information about this machine. • Maximum workpiece dimensions (W × D × H): 800 × 650 × 300 mm • Note: only coaxial flushing available for heights ≥ 250 mm • Maximum workpiece weight: 800 kg • Drive system: AC servo drives • Linear axes (X/Y) • Travel paths: X 500 mm (left/right), Y 350 mm (forward/backward) • Travel speeds: fast 1,200 mm/min; medium 100 mm/min; slow 10 mm/min • Minimum step increment: 0.0001 mm • Upper head (Z-axis) Codpfjx D Enxox Aa Tjpw • Drive system: AC servo drive • Travel path (up/down): 310 mm • Taper unit (U/V axes) • Drive system: AC servo drives • Travel paths (upper head): U 120 mm (left/right), V 120 mm (forward/backward) • Travel speeds: fast 1,200 mm/min; medium 100 mm/min; slow 10 mm/min • Minimum step increment: 0.0001 mm • Taper angle: standard up to ±32°; at 120 mm cutting height: ±10°; optional (at 40 mm cutting height): ±45° Dimensions Machine depth 1915 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jumlah sumbu: 4, en-GB-1 Cpedpfx Asyip Aroa Tsw

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Semuanya dalam kondisi prima! Siap pakai segera! Transportasi dimungkinkan! Dimensi maksimum benda kerja: 800 x 600 x 215 mm Berat maksimum benda kerja: 500 kg Dimensi meja: 640 x 540 mm Perjalanan sumbu: Sumbu X: 400 mm Sumbu Y: 300 mm Sumbu Z: 220 mm Kecepatan rapid traverse: 1300 mm/menit Diameter kawat: 0,1 hingga 0,3 mm Kecepatan umpan kawat: 23 m/menit Tegangan kawat: 0,5 hingga 25 N Kepala konus: Perangkat OPTOLinear T/C Sudut konus: 15° (pada ketebalan pelat 200 mm) Jam operasional: 24.073 Reservoir dielektrik: Volume tang kerja: 550 liter Cpodpfeyrub Eex Aa Tew Laju aliran filter: 50 l/menit Filter air: 10 liter Karakteristik lain: Superfinish Ketelitian permukaan < Ra 0,2

Kondisi: bekas, Tahun pembuatan: 2002, de-hu-001 Cpedpfx Aaoylby Ij Tsw

Kondisi: bekas, de-to-hu-20240610 Cjdpox Igc Usfx Aa Tjpw

Kondisi: bekas, Tahun pembuatan: 2007, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, and disk-shaped tools such as saws and milling cutters using the wire electrical discharge machining (EDM) process. Equipment: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system - N181 extraction unit - Measuring probe - Machine lamp - Automatic central lubrication - Workpiece holder ISO50 - Measuring arbor Milling cutter outer diameter: max. 250 mm Cutting edge length: max. 260 mm Shank tool diameter: 10 - 250 mm Outer diameter of disk-shaped tools: max. 250 mm Maximum tool weight: 20 kg Codpfx Aaewtmg Ds Tepw X-axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis spindle taper: ISO 50 E-axis swivel range: 180° Machine footprint: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, hochpräzisions-drahterodiermaschine-gf-cut-1000-baujahr-2018 Cedpfx Asxq Akwoa Tepw

Kondisi: bekas, Tahun pembuatan: 2018, Wire EDM machines / EDM 3D Metal Printer Laser type / Power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotationally-guided coater Gas connection: Argon / Nitrogen Codpfx Aovtftksa Tjpw Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Tahun pembuatan: 2001, Kondisi: baik (bekas), Travel paths X / Y / Z: 220 x 150 x 150 mm Z-axis device: Standard equipment (= 5th axis) Max. taper angle: 15° (for 100 mm thick workpiece) Taper cutting device: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Csdpfjg Icdyex Aa Tjpw Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Tahun pembuatan: 1989, Kondisi: baik (bekas), Specifications: - Table travel: 160 x 200 mm - Maximum cutting thickness: 80 mm - Maximum workpiece weight: 40 kg - Wire diameter: 0.08 to 0.15 mm - Power supply: three-phase 380/220 V - Power consumption: 0.6 kW Csdpsgrnytefx Aa Tjpw - Machine weight: 650 kg