Penguji kekerasan Vickers

AFFRI WIKI 90

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Material Testing Machine: ZwickRoell GmbH mod. Z005TN Designed for performing standard tests on materials and components, this equipment enables precise measurement of strength, elasticity, and other material properties—crucial in engineering and material research. Featuring advanced technology and intuitive software, the machines offer efficient and safe operation. The set includes accessories for tensile, compression, and flexural testing. Technical Specifications: • Year of manufacture: 2010 • Maximum Load (Fmax): 5 kN • Testing Dimensions: - Height (without accessories): 1070 mm - Test Travel Height: 1000 mm • Frame Dimensions: Nwjdpfx Abeuna Iuemep - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approx. 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption approx. 800 VA. The machine is suitable for testing a variety of materials and components, including: • Construction materials: concrete, steel, timber. • Plastics: elasticity, tensile strength. • Metals: strength, hardness, and fatigue tests. • Mechanical components: compression, bending, and tensile tests. • Samples of various forms: thin layers, blocks, tubular specimens. The system's flexibility allows testing to be adapted to specific requirements. TAG: Laboratory equipment, Material testing, EPS foam, Polystyrene production, Mechanical testing, Thermal conductivity, Material properties, Construction materials, Quality control, Engineering research

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.) Nodpfxodyah Se Abmjwp

Kondisi: bekas, Tahun pembuatan: 2014, DMC DL 80V CNC vertical lathe Year of manufacture: 2014 Turning diameter: 800 mm Turning length: 750 mm 30 kW spindle, 2,000 rpm 12-position turret 21" chuck Fanuc Oi-Td control Nodpfxsvr Ecpj Abmswp Machine weight: 9,800 kg Supplied with chip conveyor and standard accessories.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 760 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, berat benda kerja (maks.): 12.000 kg, tinggi total: 48.500 mm, panjang total: 85.800 mm, lebar total: 56.000 mm, lebar meja: 2.400 mm, panjang meja: 3.020 mm, berat keseluruhan: 20 kg, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 6.000 rpm, jarak dari tengah meja ke hidung spindel: 960 mm, hidung spindel: ISO 50, panjang alat: 350 mm, diameter alat: 127 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Portal-type vertical machining center "AWEA LP-3025" Nwjdpfx Aberl Svromep

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Nwsdpfxjtyyn He Abmep Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm Nwodpfohzbipsx Abmsp - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Tahun pembuatan: 2023, Kondisi: baru, - modern ergonomic design - manual testing process with analog dial gauge (reading accuracy 0.2 HR units) - simple operation and fast testing procedure - test space height approx. 185 mm - test space depth approx. 160 mm - dimensions 545 x 182 x 755 mm Nsdpfspbbc Hsx Abmowp Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - Prism support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16'' ball holder with ball - 120° Rockwell diamond indenter - Spindle protection - Accessory case

Tahun pembuatan: 2024, Kondisi: baru, nomor mesin/kendaraan: H3000-H5000TM,

Kondisi: baru, Tahun pembuatan: 2024, ✅ New equipment ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR Electric High-Lift Pallet Truck ◾ Model RR12HH with 3500mm lift height ◾ Low maintenance and easy handling ◾ Includes 24V batteries and charging station ◾ 1.2t / 1,200kg load capacity ◾ Excellent price-performance ratio ◾ IMMEDIATELY AVAILABLE! The electric high-lift pallet trucks from SCHORR offer an outstanding price-performance ratio. The offset drive unit ensures a tight turning radius with excellent all-round visibility. Each model is equipped with a multifunction tiller displaying the current battery level and can be started via ignition lock. The tiller is operable with both hands and features a crawl speed mode. The pallet truck design is robust and easy to service; impact-prone areas are fitted with flexible plastic. The emergency stop switch is centrally positioned for easy accessibility at all times. As standard, the trucks feature tandem load rollers for smooth and low-noise operation over uneven terrain such as paving stones. Technical Data Manufacturer (Abbreviation): SCHORR Manufacturer Model Code: RR12HHE Rated load capacity: 1.2t Model: 350E Weight incl. batteries: 477kg Drive system: Electric Tyres: Polyurethane Basic Dimensions Overall length: 1,755mm Overall width: 795mm Length including fork back: 605mm Njdpfxoidqr Ss Abmowp Lift: 3,500mm Mast height retracted: 2,224mm Mast height extended: 3,924mm Fork dimensions DIN ISO 2331: 60mm x 160mm x 1,150mm Outside fork width: 570mm Aisle width with 800x1200 Euro pallet lengthwise: 2,068mm Turning radius: 1,366mm Performance Travel speed loaded/unloaded: 4.0km/h / 4.2km/h Lifting speed loaded/unloaded: 0.09m/s / 0.14m/s Lowering speed loaded/unloaded: 0.11m/s / 0.1m/s Max. gradeability loaded/unloaded: 6% / 8% Whether you prefer the high-lift pallet truck delivered, or wish to collect it from us in 48465 Schüttorf, we can offer the right solution. Please contact us for details. To ensure that pick-ups and viewings are as convenient as possible, please note these are possible strictly by prior telephone appointment. Would you prefer to finance or lease the unit? No problem! We also offer attractive financing options. Get in touch and we will be happy to advise you. We look forward to your enquiry! The SCHORR team is available for any further questions regarding our pallet trucks. You can reach our experienced staff by phone or email. We look forward to hearing from you and assisting with your enquiry.

Kondisi: sangat baik (bekas), Travel distances 600 x 560 x 510 mm Table size 900 x 560 mm Spindle taper SK40 Spindle speeds 20–12,000 rpm Tool changer with 30 positions Control: SIEMENS 840D Through-spindle cooling Various accessories MARCELS MASCHINEN CH Nsdovhahrspfx Abmowp