AgieCharmilles Spirit 3

AGIE CHARMILLES Spirit 3

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die von Hand gezeigten Teile sind nicht enthalten. Technische Details siehe Abbildung. Gbedsrpn Dvjpfx Alksl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Gbjdod Tiu Eopfx Alkol Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 750 kg, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, berat kosong: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Maximum taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Gbodpswqdrrsfx Alkel Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete unit: 2020 x 2050 x 2000 mm Total weight of the unit: 2,450 kg The machine will be cleaned, overhauled, and tested by us prior to delivery. We are also happy to offer you installation and commissioning of the machine.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 255 mm, lebar total: 1.990 mm, berat keseluruhan: 1.800 kg, produsen pengendali: FANUC, model controller: 31i-WB, jumlah sumbu: 5, Wire EDM machine from 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking for a high-quality wire EDM machine, consider the FANUC Robocut alpha-C400iB we have for sale. Contact us for further details. • Workpiece capacity: maximum dimensions 730 × 630 × 250 mm; maximum workpiece weight 500 kg • Axis travels: U/V 120 × 120 mm • Machining capabilities: max. taper angle ±30°/80 mm; minimum drive step 0.0001 mm; wire diameter Ø0.10-Ø0.30 mm; max. • Control: FANUC 31i-WB; part program memory 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Fine wire option: wire diameter Ø0.05-Ø0.07 mm • Automatic front door option: maximum workpiece dimensions with automatic door 730 × 585 × 250 mm • 45° punch guide option: max. taper angle ±45°/40 mm • Wire feeding unit 30 kg option: maximum wire spool weight 30 kg • Installation requirements: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable clamp size 8-5; power consumption 13 kVA • Air supply: 0.5-0.7 MPa; 100-110 L/min (minimum 120 L/min with fine wire option); coupling fixing screw Rc1/4 on the regulator side • Environment: 15-30°C (recommended 20 ±1°C for high-precision machining); oil mist-free and dust-free; humidity ≤75% RH • Grounding: type C; maximum grounding resistance 10 Ω; must be grounded independently from other machines • Requirement for shielded room: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed. Gbedpfx Aoypma Islkjl

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel 2000 mm Y-axis travel 620 mm Z-axis travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Gedpfx Aoulnbkslksbl Tool holder SK40 Control HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control - Tool magazine with 30 positions - Chip conveyor - Sieve filter system with high-pressure coolant (IKZ) - Operating manual Optional (on request): - Wireless probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Tahun pembuatan: 2020, Kondisi: seperti baru (mesin pameran),

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 18.950 h, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, drahtdurchmesser-01-03-mm-automatische-wiedereinfadelung-wasserb ad-betriebsstunden18950-std-verfahrwege-x-350-mm-y-220-mm-z-220-m m-u-350-mm-v-220-mm-millenium-steuerung-baujahr-2005 Gsdpfx Alswzyvhekjbl

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.060 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, model controller: Ultimax, tinggi total: 2.800 mm, panjang total: 2.200 mm, lebar total: 2.400 mm, lebar meja: 610 mm, panjang meja: 1.270 mm, daya motor spindle: 18.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, Perlengkapan: dokumentasi / manual, konveyor serpihan, 3 axes Gbodowtdzropfx Alkel Tool holder SK 40 Internal cooling 35 kVA Approx. 7550 kg Extensive tool package available separately

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: belum diuji, nomor mesin/kendaraan: XXX,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 480 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.340 mm, panjang garpu: 2.400 mm, berat kosong: 7.643 kg, panjang total: 2.600 mm, jenis penggerak: Elektro, lebar konstruksi: 1.400 mm, Forklift Listrik 4 Roda Gbsdpfx Aoydr Hielkjl Lebar garpu: 130 mm Tebal garpu: 60 mm Kelas ISO: Kelas ISO 4 = 5.000 - 10.000 kg Tipe tiang: Triplex Kondisi teknis: sangat baik Ban depan tipe: non marking Kondisi ban depan: 80 - 100% Ban belakang tipe: non marking Kondisi ban belakang: 80 - 100% Volt baterai: 80V Ampere jam baterai: 930Ah Produsen baterai: Still Tahun pembuatan baterai: 2019 Kondisi baterai: 80 - 100% Side shifter, alat pengatur lebar garpu, Katup ke-3, katup ke-4,